 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Super Fast Recovery Diode RFUS20NS6S Series Ultra Fast Recovery Dimensions(Unit : mm) Land size figure(Unit : mm) Applications General rectification Features 1)Ultra low switching loss 2)High current overload capacity 3)Cathode common single type Structure Construction Silicon epitaxial planer Taping dimensions (Unit : mm) Absolute maximum ratings(Tc=25C) Parameter Symbol VRM Repetitive peak reverse voltage VR Reverse voltage Average rectified forward current Forward current surge peak Junction temperature Storage temperature Electrical characteristics(Tj=25C) Parameter Forward voltage Reverse current Reverse recovery time Thermal resistance Io IFSM Tj Tstg Conditions Duty0.5 Direct voltage 60Hz half sin wave resistive load , Limits 600 600 20 100 150 -55to+150 Unit V V A A C C Tc=36C 1/2 Io per diode 60Hz half sin wave, Non-repetitive one cycle peak value, Tj=25C Symbol VF IR trr Rth(j-c) Conditions IF=20A VR=600V IF=0.5A,IR=1A,Irr=0.25xIR junction to case Min. - Typ. 2.4 0.05 23 - Max. 2.8 10 35 2 Unit V A ns C/W www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.02 - Rev.A RFUS20NS6S Data Sheet Electrical characteristic curves 100 Tj=125C Tj=150C FORWARD CURRENT : IF(A) 10 Tj=25C Tj=75C 1000000 Tj=150C 1000 CAPACITANCE BETWEEN TERMINALS : Ct(pF) Tj=125C f=1MHz Tj=25C 100000 REVERSE CURRENT : IR(nA) 10000 Tj=75C 1000 100 1 100 Tj=25C 10 0.1 0 1000 2000 3000 4000 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 1 0 50 100 150 200 250 300 350 10 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 2500 T=25C IF=10A n=20pcs 100 CAPACITANCE BETWEEN TERMINALS : Ct(pF) T=25C VR=600V n=20pcs 600 Ta=25C f=1MHz VR=0V n=10pcs FORWARD VOLTAGE : VF(mV) 2400 REVERSE CURRENT : IR(nA) AVE : 71.5nA 550 2300 10 500 2200 AVE : 2264mV 2100 450 AVE : 492pF 2000 VF DISPERSION MAP 1 400 IR DISPERSION MAP Ct DISPERSION MAP 300 IFSM 8.3ms 1cyc RESERVE RECOVERY TIME : trr(ns) 30 25 AVE : 26.1ns T=25C IF=0.5A IR=1A Irr=0.25xIR n=10pcs 1000 ITS ABILITY OF PEAK SURGE FORWARD CURRENT : IFSM(A) PEAK SURGE FORWARD CURRENT : IFSM(A) 250 200 20 15 10 100 150 100 AVE : 144.5A 10 IFSM 8.3ms 8.3ms 50 5 0 trr DISPERSION MAP 1cyc. 1 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 0 IFSM DISRESION MAP 1000 5 4.5 ELECTROSTATIC DISCHARGE TEST ESD(KV) 4 3.5 3 2.5 2 1.5 1 0.5 0 AVE : 0.94kV AVE : 3.76kV 10 TRANSIENT C/W) THAERMAL IMPEDANCE:Rth ( PEAK SURGE FORWARD CURRENT : IFSM(A) IFSM time 100 Rth(j-c) 1 10 1 10 TIME : t(ms) IFSM-t CHARACTERISTICS 100 C=200pF R=0 C=100pF R=1.5k 0.1 0.001 0.01 0.1 1 10 100 1000 ESD DISPERSION MAP TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.02 - Rev.A RFUS20NS6S 90 D.C. 80 70 FORWARD POWER DISSIPATION : Pf(W) half sin wave 60 D=0.2 50 D=0.1 40 30 20 10 0 0 5 10 15 20 25 30 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS 35 D=0.05 D=0.8 D=0.5 35 0A Io VR t D=t/T VR=480V T Tj=150C Data Sheet 30 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) 25 20 15 0V D.C. D=0.8 D=0.5 half sin wave D=0.2 D=0.1 5 0 0 30 60 90 120 CASE TEMPARATURE : Tc(C) Derating Curve"(Io-Tc) 150 D=0.05 10 www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.02 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RFUS20NS6S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |