 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SD1383K Transistors High-gain Amplifier Transistor (32V , 0.3A) 2SD1383K Features 1) Darlington connection for high DC current gain. 2) Built-in 4k resistor between base and emitter. 3) Complements the 2SB852K. Packaging specifications Type Package hFE Marking Code Basic ordering unit (pieces) 2SD1383K SMT3 B W T146 3000 (1)Emitter (2)Base (3)Collector Each lead has same dimensions Dimensions (Unit : mm) 2SD1383K Denotes hFE Circuit diagram C B RBE 4k E : Emitter B : Base C : Collector E Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature 1 RBE=0 2 Single pulse Pw=10ms Symbol VCBO VCES VEBO IC PC Tj Tstg Limits 40 32 6 0.3 1.5 0.2 150 -55 to +150 Unit V 1 V V A (DC) A (Pulse) 2 W C C Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Collector-emitter saturation voltage Transition frequency Output capacitance 1 Measured using pulse current. 2 Transition frequency of the device. Symbol BVCBO BVCES BVEBO ICBO IEBO hFE VCE(sat) fT Cob Min. 40 32 6 - - 5000 - - - Typ. - - - - - - - 250 3 Max. - - - 1 1 - 1.5 - - Unit V V V A A - V MHz pF Conditions IC=100A IC= -1mA , RBE=0 IE=100A VCB=24V VEB=4.5V VCE=5V, IC=0.1A IC=200mA, IB=0.4mA 1 VCE=5V, IE= -10mA, f=100MHz 2 VCB=10V, IE=0A, f=1MHz Rev.C 1/2 2SD1383K Transistors Electrical characteristic curves 125 POWER DISSIPATION : PC/PCMax (%) 500 VCE=6V COLLECTOR CURRENT : IC (mA) 100 COLLECTOR CURRENT : IC (mA) IB=10A Ta=25C 100 200 100 Ta=25C 9A 8A 50 75 Ta= -55C 50 20 10 5 2 Ta=100C 7A 6A 5A 4A 50 25 0 0 0 25 50 75 100 125 150 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 0 0 1 3A 2 3 4 5 AMBIENT TEMPERATURE : Ta (C) BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.1 Power dissipation curves Fig.2 Ground emitter propagation characteristisc Fig.3 Ground emitter output characteristics COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) Ta=25C 50000 DC CURRENT GAIN : hFE DC CURRENT GAIN : hFE VCE=5V IC/IB=500 2 Ta= -55C 5V 20000 10000 5000 VCE=3V 2000 1000 500 5 10 20 50 100 200 500 1000 2000 100000 50000 T 1 a= 00 C 1 0.5 25 C 100C 25C 20000 10000 5000 C -55 0.2 5 10 20 50 100 200 500 1000 2000 0.1 0.5 1 2 5 100 200 500 1000 2000 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current ( ) Fig.5 DC current gain vs. collector current ( ) Fig.6 Collector-emitter saturation voltage vs. collector current EMITTER INPUT CAPACITANCE : Cib (pF) TRANSISION FREQUWNCY : fT (MHz) OUTPUT CAPACITANCE : Cob (pF) Ta=25C VCE=6V Ta=25C f=1MHz IE=0A 20 10 Ta=25C f=1MHz IE=0A 500 20 200 100 10 5 5 50 2 2 -1 -2 -5 -10 -20 -50 -100 1 2 5 10 20 50 1 1 2 5 10 EMITTER CURRENT : IE (mA) COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) Fig.7 Gain bandwidth product vs. emitter current Fig.8 Collector output capacitance vs. collector-base voltage Fig.9 Emitter input capacitance vs. emitter-base voltage Rev.C 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0 |
Price & Availability of 2SD1383K-2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |