 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SPEC NO : SPECIFICATION CUSTOMER PRODUCT MODEL NO PREPARED APPROVED SAW FILTER HDBF36A14DC SIP5Dc CHECKED D A T E 2008-11-18 CUSTOMER RECEIVED: CHECKED APPROVED DATE Shoulder Electronics Limited www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 1 of 11 SAW FILTER HDBF36A14DC SIP5Dc History Record Date Spec. No. Part No. Customer No. Modify Content Remark www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 2 of 11 SAW FILTER 1.SCOPE HDBF36A14DC SIP5Dc Shoulder's SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SECAM systems. These filters are composed of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in electronic equipments such as TV and so on. 2.Construction 2.1 Dimension and materials Manufacturer's name :Shoulder Electronics Limited Type : BF36A14Dc Unit: mm Pin configurations 1. 2. 3. 4. 5. Input Switching input Chip carrier ground Output Output YY:year WW:week www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 3 of 11 SAW FILTER 2.2. Circuit construction, measurement circuit HDBF36A14DC SIP5Dc 3.Characteristics Items Standard atmospheric conditions Conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15 to 35 Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -10 ~ +60 Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40 ~ +70 +25 Specifications Operating temperature rang There shall be no damage. Storage temperature rang Reference temperature www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 4 of 11 SAW FILTER 3.1 Maximum Rating DC voltage AC voltage VDC Vpp 12 10 V V HDBF36A14DC SIP5Dc Between any terminals Between any terminals 3.2 Electrical Characteristics Characteristics of channel 1 (switching input pin 2 connected to pin 3) Source impedance Load impedance Item Insertion attenuation Reference level Pass bandwidth Zs=50 ZL=2k//3pF Freq 36.125MHz min 20.8 33.0 31.0 - typ 22.3 8.0 9.5 38.0 35.0 50.0 TA=25 max 23.8 dB MHz MHz dB dB dB B3dB B30dB 25.00~30.90MHz Sidelobe 42.00~45.00MHz Reflected wave signal suppression 1.2 us ... 6.0 us after main pulse (test pulse 250 ns , carrier frequency 36.125 MHz) Group delay ripple (p-p) 32.32~39.93 MHz Temperature coefficient Source impedance Load impedance Item Insertion attenuation Reference level Pass bandwidth Zs=50 ZL=2k//3pF Freq 36.125MHz - 60 -72 - ns ppm/k Characteristics of channel 2 (switching input pin 2 connected to pin 1) min 20.8 31.0 31.0 - typ 22.3 6.0 8.5 34.0 34.0 50.0 TA=25 max 23.8 dB MHz MHz dB dB dB B3dB B30dB 25.00~31.55MHz Sidelobe 41.4~45.00MHz Reflected wave signal suppression 1.2 us ... 6.0 us after main pulse (test pulse 250 ns , carrier frequency 36.125 MHz) Group delay ripple (p-p) 33.59~38.65 MHz Temperature coefficient - 60 -72 - ns ppm/k www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 5 of 11 SAW FILTER HDBF36A14DC SIP5Dc 3.3 Environmental Performance Characteristics Item Condition High The specimen shall be store at a temperature of temperature 802 for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Low The specimen shall be store at a temperature of temperature -203 for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Humidity The specimen shall be store at a temperature of 402 with relative humidity of 90% to 96% for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Thermal The specimen shall be subjected to 8 continuous shock cycles each as shown below. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Temperature Duration 1 +25 =>-40 0.5h 2 -40 4h 3 -40 =>+85 2h 4 +85 4h 5 +85 =>+25 0.5h 6 +25 1h Resistance to Reflow soldering method Peak: 255 5 , 220 5 , 40s Soldering heat At electrode temperature of the specimen. Specifications Mechanical characteristics and specifications in electrical characteristics shall be satisfied. There shall be no excessive change in appearance. www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 6 of 11 SAW FILTER HDBF36A14DC SIP5Dc Solder ability The specimen shall be passed through the reflow furnace with the condition shown in the above profile for 1 time. The specimen shall be stored at standard atmospheric conditions for 1h, after which the measurement shall be made. Test board shall be 1.6 mm thick. Base material shall be glass fabric base epoxy resin. Immerse the pins melt solder at 260+5/-0 More then 95% of for 5 sec. total area of the pins should be covered with solder 3.4 Mechanical Test Items Conditions Vibration 600-3300rpm amplitude 1.5mm 3 directions 2 H each Drop On maple plate from 1 m high 3 times Lead pull Lead bend Pull with 1 kg force for 30 seconds 90o bending with 500g weigh 2 times Specifications There shall be no damage. 3.5 Voltage Discharge Test Item Condition Surge Between any two electrode Specifications There shall be no damage www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 7 of 11 SAW FILTER 3.6 Frequency response of channel 1: HDBF36A14DC SIP5Dc www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 8 of 11 SAW FILTER HDBF36A14DC SIP5Dc www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 9 of 11 SAW FILTER Frequency response of channel 2: HDBF36A14DC SIP5Dc www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 10 of 11 SAW FILTER HDBF36A14DC SIP5Dc www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 11 of 11 |
Price & Availability of HDBF36A14DC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |