 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RPI-1031 Surface Mount type 4 Direction Detector Absolute maximum ratings (Ta=25C) Input (LED) Dimensions (Unit : mm) 3.9 Stamp (year, week, day of the week) 1PIN mark 3.9 Parameter Forward current Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Collector current Collector power dissipation Operating temperature Storage temperature Symbol IF VR PD VCEO VECO IC PC Topr Tstg Limits 50 5 80 30 4.5 30 80 -25 to +85 -30 to +85 Unit mA V mW V V mA mW Applications DSC(Digital steal camera) DVC(Digital video camera) Digital handy phone, Fan herater, Projector 0747D 31001 Mark side (Symbol of check in company) (photo- ) transistor Output Features 1) Surface Mount type 2) Optical Sensor 3) 4 Pirection Detector 3.7 1.9 C C 2.4 Pattern 0.8 Electrical and optical characteristics (Ta=25C) Parameter Output Input charac- characteristics teristics Symbol VF IR ICEO Min. Typ. Max. Unit V A A nm A VCE=5V, IF=5mA VCE=5V, IF=5mA IF=20mA, IC=0.1mA VCC=5V, IF=20mA, RL=100 IF=50mA IF=50mA VR=5V VCE=10V Conditions Forward voltage Reverse current Dark current Peak sensitivity wavelength Collector current DC leakage current - - - - 100 - - - - - - - - 1.3 - - 800 - - - 10 10 1 950 10 800 1.6 10 0.5 - - 15 0.4 - - - - - - 0.9 Resist 1 - P IC Ileok 3.7 Transfer characteristics A V s s MHz nm s nm Collector-emitter saturation voltage VCE(sat) Response time Rise time Fall time tr tf fC Internal connection diagram Anode Cathode Infrared light emitter diode Cut-off frequency Peak light emitting wavelength Response time Maximum sensitivity wavelength P tr tf Non-coherent Infrared light emitting diode used. Collector 2 Collector 1 Photo transistor VCC=5V, IC=1mA, RL=100 Detector 2 Emitter Detector 1 Emitter 1 This product is not designed to be protected against electromagnetic wave. P - Notes: 1. Unspecified tolerance shall be 0.2 . 2. Dimension in parenthesis are show for reference. Electrical and optical characteristics curves POWER DISSIPATION / COLLECTOR POWER DISSIPTION : PD/PC (mW) 60 FORWARD CURRENT : IF (mA) 50 40 30 20 10 0 -20 FORWARD CURRENT : IF (mA) 60 50 40 30 20 10 0 100 800 700 RESPONSE TIME : tr (s) 80 10000 1000 100 10 1 0.1 0.01 -25 COLLECTOR CURRENT : IC (mA) 2.5 tr 600 DARK CURRENT : ICEO (nA) 2 IF=50mA IF=40mA tf 500 400 300 200 100 60 1.5 IF=30mA 1 40 IF=20mA 0.5 20 IF=10mA IF=5mA 0 25 50 75 100 0.9 1.1 1.3 1.5 0 -20 0 25 50 75 100 0 0 10 LOAD RESISTANCE : RL (k) 100 25 75 0 0 1 2 3 4 5 6 7 8 9 10 AMBIENT TEMPERATURE : Ta (C) FORWARD VOLTAGE : VF (V) AMBIENT TEMPERATURE : Ta (C) AMBIENT TEMPERATURE : Ta (C) COLLECTOR TO EMITTER VOLTAGE: VCE (V) Fig.1 Forward current falloff RELATIVE COLLECTOR CURRENT : Ic (%) 1.2 COLLECTOR CURRENT : IC (mA) 2 Fig.2 Forward current vs. forward voltage Fig.3 Power dissipation / collector power dissipation vs. ambient temperature 0.08 DC LEAKAGE CURRENT : Ileak (mA) 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 0 20 40 60 RIP input Fig.7 Response time vs. collector current Fig.8 Dark current vs. ambient temperature Fig.9 Output characteristics 1 0.8 0.6 0.4 0.2 0 -25 -10 1.5 VCC 90% VOUT1 VOUT2 RL1 RL2 VOUT 1 0.5 10% 5 20 35 50 65 80 0 0 20 40 60 AMBIENT TEMPERATURE : Ta (C) FORWARD CURRENT : IF (mA) FORWARD CURRENT : IF (mA) Fig.4 Relative output vs. ambient temperature Fig.5 Collector current vs. forward current Fig.6 DC leakage current vs. forward current Fig.10 Response time measurement circuit Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0 |
Price & Availability of RPI-1031
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |