View XP9003-MB_4631557.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1.6 GHz 30W Power Amplifier Module
May 2009 - Rev 12-May-09
P9003-MB Features
Peak-Envelope Power, 30W with Pulsed Signal 3W Linear Power 38 dB Gain 9V Positive Voltage Supply Fully Matched Internally Thermally Efficient for Higher MTTF Balanced Output Construction Shielded Metal Lid Low Harmonic Content Small Size, 40x36mm Surface Mount Package
Absolute Maximum Ratings General Description
The XP9003-MB is a highly linear 3-stage power amplifier module capable of 38 dB of gain, 30W of peak-power and is housed in a surface mount, thermally efficient package. XP9003-MB is fully matched internally and does not require external components. The module operates off a 9V voltage supply rail and is equipped with active bias circuit and control voltage allowing for current setting and minimizing variation over temperature and voltage. This product is designed specifically for satellite communication transmitters with high peak to average signals. XP9003-MB achieves excess of 35 dBm of linear power and less than -45 dBc adjacent channel power ratio when operated under a 16 QAM traffic signal with 6 dB peak to average ratio.
50 40 30 20 (dB) 10 0 -10 -20 -30 -40 -50 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3
Supply Voltage RF Input Power Storage Temperature Junctions Temperature Operating Temperature Thermal Resistance Moisture Sensitivity Rating ESD (HBM)
+9.0V +10 dBm -55C to 125 C 175C -40C to 85 C 2.25C/W MSL 3 TBD
Operating this device above any of the above parameters may cause permanent damage
XP9003-MB: Gain
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
1.6 GHz 30W Power Amplifier Module
May 2009 - Rev 12-May-09
P9003-MB
Electrical Characteristics (T = 25C)
Parameter
Operating Frequency Peak-Envelope Power Average Output Power DC Power Consumption Efficiency Power Gain Input Return Loss Input Impedance Output Impedance Voltage (stage 1) Voltage (Stage 2) Voltage (Stage 3) Current (Stage 1) Current (Stage 2) Current (Stage 3) Reference Voltage Reference Current Control Voltage Control Current Bias Circuit Voltage Bias Circuit Current Pout Pout Avr Pdc Eff Gp S11 Zin Zout Vcc1 Vcc2 Vcc3 Icc1 Icc2 Icc3 Vref Iref Vcntrl Icntrl VCBias ICBias 15 38 -10 50 50 5 9 9 300 600 2000 9 50 9 2 5 150 35 40
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture
Symbol
Min
Typ
1620
30
Max
Unit
MHz
W dBm W % dB dB ohm ohm V V V mA mA mA V mA V mA V mA
Condition
16 QAM, PAR = 6 dB, pulsed 16 QAM, PAR = 6 dB, pulsed, ACPR -45 dBc @ Pout = +35 dBm @ Pout = +35 dBm
@ Pout = +35 dBm, 16QAM @ Pout = +35 dBm, 16QAM
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
1.6 GHz 30W Power Amplifier Module
May 2009 - Rev 12-May-09
P9003-MB
Typical Performance (T = 25C)
ACPR Performance (16 QAM)
0 -10
ACP Lo (dBc) ACP Hi (dBc)
ACP (dBc)
-20 -30 -40 -50 -60 15 20 25 30
35
40
45
Pout (dBm)
ACPR Performance (NADC, /4 QPSK)
0 ACP Lo (dBc) -10 ACP Hi (dBc)
ACP (dBc)
-20 -30 -40 -50 -60 15 20 25 30 35 40 45
Pout (dBm)
Current Vs Pout: 16QAM, CW
3200 3000 2800 2600 2400 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 18 20 22 24 26 28 30 32 34 36 38
Current (mA)
Icc3 Icc2 Icc1
40
42
Output Power (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
1.6 GHz 30W Power Amplifier Module
May 2009 - Rev 12-May-09
P9003-MB
Physical Dimensions and Pin Designation
All Dimensions are in mm
Evaluation Board Components Layout
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
1.6 GHz 30W Power Amplifier Module
May 2009 - Rev 12-May-09
P9003-MB Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a drop-in package and is not
compatible with exposure to reflow soldering processes due to the nature of its internal construction. Mimix will only support hand-soldering processes for this device. Care should be taken not to apply heavy pressure to the top or tabs to avoid package damage. Care should be taken to ensure that there are no voids or gaps in the solder connections and base heat sink so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes.
Ordering Information
XP9003-MB-0N00 XP9003-MB-EV1
Description 1.6 GHz, 30W Power Amplifier Module Evaluation Board with SMA Connectors
Caution: ESD Sensitive
Appropriate precautions in handling, packaging and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.

▲Up To Search▲

Price & Availability of XP9003-MB

	To Download XP9003-MB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .