 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TES 1V Series, 1 Watt Features Small SMD package with standard footprint I/O-isolation voltage 3000 VDC Single- and dual output models High efficiency up to 80% Operating temperature range -40C to +75C High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D Available in tape and reel package 3-year product warranty The TES-1V series are miniature, 1W DC/DC-converters with high isolation in a SMD package. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Order code TES 1-0510V TES 1-0511V TES 1-0512V TES 1-0513V TES 1-0521V TES 1-0522V TES 1-0523V TES 1-1210V TES 1-1211V TES 1-1212V TES 1-1213V TES 1-1221V TES 1-1222V TES 1-1223V TES 1-2410V TES 1-2411V TES 1-2412V TES 1-2413V TES 1-2421V TES 1-2422V TES 1-2423V http://www.tracopower.com 24 VDC 10% (nominal 24 VDC) 12 VDC 10% (nominal 12 VDC) 5 VDC 10% (nominal 5 VDC) Input voltage Output voltage 3.3 VDC 5.0 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 260 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA 260 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA 260 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA Efficiency typ. 72 % 75 % 79 % 80 % 75 % 79 % 80 % 73 % 76 % 80 % 81 % 76 % 80 % 80 % 70 % 73 % 79 % 79 % 73 % 79 % 79 % Page 1 of 3 DC/DC Converters TES 1V Series Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 15 mA / 110 mA typ. 24 Vin models: 8 mA / 55 mA typ. 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. 0.3 A max. internal capacitor see graphs below 1.0 % max. 1.2 % / 1 % change Vin see graphs below 100 mVpp max. 0.02 %/K max. limited 0.5 sec. max. 3.3 & 5.0 12 & 15 5.0 12 & 15 - Operating - Storage - Casing VDC VDC VDC VDC models: models: models: models: 33 F max. 4.7 F max. 10 F max. 2.2 F max. -25C to +75C with no derating -25C to +125C 95C max. 95 % rel. H max. >2 Mio h 3000 VDC 60 pF typ. >10 Gohm 50 to 150 kHz (depending on load) - Input variation - Load variation 1 Watt Surge voltage (1 sec. max.) Reverse voltage protection Input filter Output Specifications Voltage set accuracy Voltage balance (dual output models, balanced load) Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Short circuit protection Capacitive load General Specifications Temperature ranges Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217F, @ 25C, ground benign) I/O isolation voltage (60 sec) I/O isolation capacity (100 kHz, 1 V) I/O isolation resistance (500 VDC) Switching frequency Output voltage variation dependent on load (at nominal input voltage) 3.3 & 5.0 VDC models: other models: Deviation of Vout nom. Deviation of Vout nom. +20% +15% +10% +5% 0% -5% -10% 0 20% 40% 60% Output Load 80% max. typ. min. 100% +20% +15% +10% +5% 0% -5% -10% 0 20% 40% 60% Output Load 80% max. typ. min. 100% All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 1V Series Physical Specifications Casing material Package weight Lead-free reflow solder process Moisture sensivity level (MSL) non-conductive plastic (flammability to UL 94V-0 rated) 2.0 g (0.07 oz) test report as per IPC J-STD-020D MSL report level 2 as per IPC J-STD-033B 1 Watt Outline Dimensions Pin-Out (0.31) 0.33 (0.01) S Pin 1 2 3 0.25 Single -Vin (GND) +Vin No con. -Vout No con. No con. +Vout No con. No con. No con. Dual -Vin (GND) +Vin No con. Common -Vout No con. +Vout No con. No con. No con. 8.0 (0.07) (0.10) 1.8 2.54 2.54 (0.10) (0.20) 5.08 (0.10) 2.54 1.5 (0.06) 5.5 (0.22) 11.0 5.5 (0.22) (0.43) 0-4 5 6 7 8 12 11 10 8 7 (0.31) 8.0 Top view 1 2 3 16.3 (0.64) 5 6 Dimensions in [mm], () = Inch Pin pitch tolerances: 0.13 (0.005) Other tolerances: 0.25 (0.01) 10 11 12 No con. = Pin to be isolated from circuitry Solder Pad Dimensions 1.0 (0.04) (0.20) 5.08 1.9 (0.07) (0.10) 2.54 Specifications can be changed any time without notice. Rev. 05/09 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com 12.0 (0.47) Page 3 of 3 |
Price & Availability of TES1-2410V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |