View TSL1TTE20L0D_4642403.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

KOA SPEER ELECTRONICS, INC.
SS-199 R18
AHA 5/01/08
Current Sensing Chip Resistors Type SL/TSL Resistor
CERTIFIED
CERTIFIED
1. Scope This specification applies to current sensing chip resistors (SL/TSL) produced by KOA Corporation. Products with lead-free terminations meet EU-RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC 2. Type Designation The type designation shall be in the following form: New Type
SL
Type SL SLN TSL
1
Size 1 Watt 2 Watt 3 Watt
Termination Material
T
Packaging
TE
Nominal Resistance
5%: 2 significant figures + 1 multiplier "R" indicates decimal on value <10 1%: 3 significant figures + 1 multiplier "R" indicates decimal on value <100 All values less than 0.1 (100m) are expressed in m with "L" as decimal Example: 20m, 1% = 20L0
20L0
Tolerance
F
SL1, TSLT: Sn TE: 7" Embossed Plastic (Other SL2, SLN2, SL3, SLN2termination TED: 10" Embossed Plastic styles may be (TSL - 3,000 pcs/reel) available, please (SL - 1,000 pcs/reel) contact factory for options)
D: 0.5% F: 1% G: 2% J: 5%
3. Standard Applications
Part Designation Power Rating T.C.R. (ppm/C) Max. 180: R=<13m 100: R=>15m 180: R=<10m 100: R=>11m Resistance Range 10m - 1M 5m - 1M 3m, 4m 3m ~ 22M 10m - 1M 5m ~ 1M 3m, 4m 3m - 22M 5m - 200m 10m - 100m SL3 3W 180: R=<10m 100: R=>11m 180: R=<13m 100: R=>15m 5m - 100m 10m - 100m 5m - 100m Resistance Tolerance E-24* (D: 0.5%) (F: 1%) (G: 2%) (J: 5%) (D: 0.5%) (F: 1%) (G: 2%) (J: 5%) (D: 0.5%) (F: 1%) (J: 5%) (D: 0.5%) (F: 1%) (J: 5%) (D: 0.5%) (F: 1%) (J: 5%) P*R P*R P*R P*R Absolute Maximum Working Voltage 200V Absolute Maximum Overload Voltage 400V Operating Temperature Range
SL1
1W
SL2
2W
500V
1000V
SLN2
2W
110: R<10m 75: R=>10m
--
--
-55C to +180C
TSL1
1W
* 3m, 4m, 5m, 6m, 7m, 8m, 9m resistance values also available
PAGE 1 OF 6
I
Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R18
4. Dimensions and Structure 4-1 Dimensions
L W t c Molded Resistive Resin Element c a b Electrode
4-2 Structure
2 1 3
Size Code SL1 SL2 NEW SLN2 SL3 TSL1
L
W
Dimensions inches (mm) t a
b
c
1 Resistive Element Metal Plate: SL1 100 m, SL2 360 m, SL3 Thick Film: SL1 > 100 m, SL2 > 360 m 2 Flameproof Molded Epoxy Case with UL94V-0 Flammability Rating 3 End Termination with Tin/Lead Solder Plating
.248.012 .122.008 .075.008 .094.008 .047.012 .047.012 (6.30.3) (3.10.2) (1.90.2) (2.40.2) (1.20.3) (1.20.3) .453.012 .276.008 .098.008 .197.008 .067.02 (11.50.3) (7.00.2) (2.50.2) (5.00.2) (1.70.5) .453.012 (11.50.3) .453.012 (11.50.3) .276.008 (7.00.2) .276.008 (7.00.2) .094.008 (2.40.2) .098.008 (2.50.2) .217.008 (5.50.2) .197.008 (5.00.2) .063.008 (1.60.2) .067.02 (1.70.5) .102.02 (2.60.5) .100.016 (2.550.4) .102.02 (2.60.5)
.248.012 .122.008 .039.008 .094.008 .028.008 .047.012 (6.30.3) (3.10.2) (1.00.2) (2.40.2) (0.70.2) (1.20.3)
5. Rating
100 80 % Rated Power 60 50 40 20 0 -55
Derating Curve
Surface Temperature Rise
TSL1/SLN2
150 125 Temperature Rise (C) 100 75 50 25
TSL1 (2) SLN2 (1) TSL1 (1) SLN2 (2)
SL1/SL2
200 175 Temperature Rise (C) 150
2 SL2 (2)
125
2
100 75 50 25
SL1 (2) SL2 (1) SL1 (1)
0
70 Ambient Temperature (C)
125
180
0
0
25
50
75
100
0
2
0
1
25
50
75
100
% Rated Power
% Rated Power
5-1 Rating SL3
For temperature in excess of 110C, the load shall be derated in accordance with the following figure.
100 80 60 40 20 0 -55 0 110 125 Ambient Temperature (C)
I
Resistors shall have a rated direct-current (DC) continuous working voltage or approximate sine-wave root-meansquare (RMS) alternating-current (AC) continuous working voltage at commercial-line frequency and waveform corresponding to the power rating, as determined from the following formula: Where: E = Rated voltage (V) P = Rated power (W) R = Nominal resistance ()
I
5-2 Voltage Rating
E=PxR
180
PAGE 2 OF 6
I
Bolivar Drive
I
P.O. Box 547
Bradford, PA 16701
I
USA
I
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R18
6. Characteristics 6-4 High Frequency Characteristics
6-1 Electrical Characteristics
No. 1 2 Item Resistance Temperature coefficient of resistance 1W 2W 3W 3 4 Short time overload Intermittent overload Requirement Within specified tolerance 180: R=<14.7 m 100: R=>15 m 180: R=<10.7 m 100: R=>11 m 180: R=<10.7 m 100: R=>11 m 1.0% maximum 5.0% maximum Test Method (JIS C 5202) JIS C 5202 5.1 Measured at 25C JIS C 5202 5.2 + 25C / +125C
5* times rated power for 5 seconds 10 Watts (SL3 only) Rated voltage x 3.0* 1 sec. ON/25 seconds OFF 1,000 cycles 18 Watts 1 second ON/125 seconds OFF 1,000 cycles (SL3 only) Surface center to terminations D. C 500V
5
Insulation Resistance
10,000 M minimum
6
Dielectric Withstanding Voltage
0.5% maximum No short, burning or arcing
A. C 500V 60 sec.
* Since temperature rise of this product are affected by the circuit board size, materials, peripheral heat-producing components, etc. check that the solder fillet part temperature after mounting is less than the solder melting point (180C) in operating condition and that the package surface is 200C or less. Also, please install radiating patterns and carefully design the pattern width with respect to the load current so that the above temperatures can be maintained.
PAGE 3 OF 6 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R18
6-2 Mechanical Characteristics
No. 1 2 Item Resistance to Soldering Heat Solderability Requirement 1.0% maximum 95% of the terminal should be covered with new solder 0.5% maximum No visual and mechanical damage Test Method (JIS C 5202) MIL-R55342 4.7.7, 260C for 10 seconds Immerse in solder at 230C 5C for 3 0.5 seconds 6.3 6.9 Condition A Each direction/2 hours
3 4
Vibration Resistance to Solvents
6-3 Environmental Characteristics
No. 1 2 3 4 Item Damp Heat Moisture Resistance Load Life (Rated load) Temperature Cycling Flammability Requirement 2.0% maximum No visual damage 2.0% maximum No evidence of damage 2.0% maximum No visual damage 1.0% maximum No mechanical damage Incombustible
Dimensions in inches (mm) Test Method (JIS C 5202) 7.9 40C 2C; 90 ~ 95% RH; 1,000 hours MIL-STD-202, Method 103, 40C, 90-95% RH, 1000 hours MIL-STD-202, Method 108, 70C, 1000 hours @ RCWV, 1.5 hr ON, 0.5 hr OFF 30 minutes @ -55C, 15 minutes @ +25C, 30 minutes @ +125C, 15 minutes @ +25C, 5 cycles 7.12 3.1 in flame/out flame Outer 15 sec./15 sec. flame 5 cycles 4.99 (127) .374 (9.5)
5
45
Inner flame 1.49 (38)
PAGE 4 OF 6 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R18
7. Taping 7-1 Dimensions of Carrier Tape
.069 (1.75) D B1 B2 A2 A1
A1 TSL SL-1 SL-2 SL-3 SLN-2 .134 (3.40.1) .142 (3.60.1) .303 (7.70.1) .303 (7.70.1) .303 (7.70.1) A2 B1
.157 (4.0)
.079 (2.0)
J
.012 (0.3 oMax.)
T1
C
F
B2
Q
K2
T2 K1 Dimensions in inches (mm)
J K1 K2 Q T1 T2
C
D
F
.125 .260 (3.20.1) (6.60.1) .134 .267 (3.40.1) (6.80.1)
.244 .472 (6.20.1) (12.00.2) .252 .472 (6.40.1) (12.00.2)
.216 .157 (5.50.1) (4.00.1) .216 .315 (5.50.1) (8.00.1)
.059 .051 .043 .059 .010 .008 (1.5 0.1) (1.30.1) (1.1 0.1) (1.5 0.1) (0.250.05) (0.200.05) 0.0 0.0 .059 .092 .085 .059 .010 .008 (1.5 0.1) (2.350.1) (2.150.1) (1.5 0.1) (0.250.05) (0.200.05) 0.0 0.0
.291 .480 .469 .945 .452 .472 .059 .134 .126 .081 .010 .008 (7.40.1) (12.20.1) (11.90.1) (24.00.2) (11.50.1) (12.00.1) (1.55 0.5) (3.40.1) (3.20.1) (2.05 0.5) (0.250.05) (0.200.05) 0.5 0.5 .291 .480 .469 .945 .452 .472 .059 .122 .110 .059 .016 .012 (7.40.1) (12.20.1) (11.90.1) (24.00.2) (11.50.1) (12.00.1) (1.5 0.1) (3.10.1) (2.80.1) (1.5 0.1) (0.400.05) (0.300.05) 0.0 0.0 -- .480 (12.20.1) -- .472 (12.00.1) -- .472 (12.00.2) -- .122 (3.10.1) -- -- -- --
7-2 Taped Configuration
End tape (Empty) Leader tape (Top tape) (Empty)
Dimensions in inches (mm)
1.57 (40) min.
3.15 (80) min.
5.90 (150) min.
PAGE 5 OF 6 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R18
oA
7-3 Reel Dimensions
W1
oc
E od oB
W2
Dimensions in inches (mm)
TSL SL-1 SL-2 SL-3
Qty/ oA oB oC oD E W1 W2 Reel 7.08 2.36 .511 .826 .079 .511 .606 (180 0.0) (60 1.0) (13.0 0.2) (21.0 0.8) (2.0 0.2) (13.0 0.3) (15.4 1.0) 3,000 3.0 0.0 7.08 2.36 .511 .826 .079 .511 .606 (180 0.0) (60 1.0) (13.0 0.2) (21.0 0.8) (2.0 0.2) (13.0 0.3) (15.4 1.0) 1,000 3.0 0.0 10.0 3.15 .511 .984 .079 1.00 1.18 (255 0.0) (80 1.0) (13.0 0.2) (25.0 1.0) (2.0 0.5) (25.5 2.0) (30.0 1.0) 1,000 3.0 0.0
8. Recommended Land Pattern TSL1, SL1 & SL2
Land Solder mask D E Dimensions in inches (mm) D .133 (3.4) .133 (3.4) .213 (5.4) .213 (5.4) .197 (5.0) E .315 (8.0) .315 (8.0) .591 (15.0) .591 (15.0) .591 (15.0) F .118 (3.0) .118 (3.0) .157 (4.0) .157 (4.0) .197 (5.0) F
8-1 Body and Marking
Body color Marking color Marking items Black White Resistance value and tolerance
TSL1 SL1 SL2 SL3 SLN-2
PAGE 6 OF 6 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.

▲Up To Search▲

Price & Availability of TSL1TTE20L0D

	To Download TSL1TTE20L0D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .