View 0906-5-L_4670359.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Document 163-1
Micro SpringTM Air Core Inductors
* Small air core inductors feature high Q and tight tolerances * Acrylic jacket provides a flat top for pick and place * Solder coated leads ensure reliable soldering
Terminations RoHS compliant tin-silver over copper Other terminations available at additional cost. Weight 0906: 10 -12 mg; 1606: 18 -27 mg Ambient temperature -40C to +125C with Irms current, +125C to +140C with derated current Storage temperature Component: -40C to +140C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 0906: 500 per 7 reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth 1606: 500 per 7 reel Plastic tape: 12 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth PCB washing Only pure water or alcohol recommended
Part L2 number1 Turns (nH) 0906-2KL_ 2 1.65 0906-3JL_ 3 2.55 0906-4_L_ 4 3.85 0906-5_L_ 5 5.40 1606-6_L_ 6 5.60 1606-7_L_ 7 7.15 1606-8_L_ 8 8.80 1606-9_L_ 9 9.85 1606-10_L_ 10 12.55
Percent tol3 10 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2
Q4 min 100 100 100 100 100 100 100 100 100
SRF DCR min5 max6 Irms7 (GHz) (mOhm) (A) 10.0 4.0 1.6 8.2 5.0 1.6 7.5 6.0 1.6 7.0 8.0 1.6 6.5 9.0 1.6 6.0 10 1.6 6.0 12 1.6 5.2 13 1.6 4.6 14 1.6
A
D
Encapsulant
E
C B Size 0906 1606 A max 0.095 2,41 0.165 4,19 B max 0.135 3,43 0.135 3,43 C max 0.060 1,52 0.062 1,58 D 0.055 0.010 1,40 0,25 0.055 0.010 1,40 0,25 E 0.072 0.010 1,83 0,25 0.144 0.012 3,66 0,30
F F max 0.020 0,51 0.020 0,51
1. When ordering, specify tolerance, termination and packaging codes: 1606-10GLC Tolerance: G = 2% J = 5% K = 10% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape, 500 parts per full reel. B = Less than full reel. In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance measured using Agilent/HP 4286 with Coilcraft SMD-A fixture and correlation. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 800 MHz, using an Agilent/HP 4291A with an Agilent/ HP 16193A test fixture. 5. SRF measured using an Agilent/HP 8720D with a Coilcraft SMD-D fixture. 6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter. 7. Current that causes a 15C temperature rise from 25C ambient. 8. Electrical specifications at 25C. See Qualification Standards section for environmental and test data. Refer to Doc 362 "Soldering Surface Mount Components" before soldering.
Strip Length
135 max
0 min
Recommended Land Patterns
0906 Size
0.031 0,79 0.040 1,02 0.097 2,46 0.040 1,02
1606 Size
0.031 0,79 0.097 2,46
0.072 1,83
0.144 3,66
Dimensions are in
inches mm
Specifications subject to change without notice. Please check our website for latest information.
Document 163-1
Revised 10/29/08
(c) Coilcraft, Inc. 2009
Document 163-2
Designer's Kit C308 contains 12 each of all values. Designer's Kit C308-2 contains12 each of all 2% values.
Micro SpringTM Air Core Inductors
Typical L vs Frequency - 0906 Series
14 12
14 12
Typical L vs Frequency - 1606 Series
12.55 nH
Inductance (nH)
Inductance (nH)
10 8 6 4 2 0 100 1000
10 8
9.85 nH 8.80 nH 7.15 nH
5.40 nH 3.85 nH 2.55 nH 1.65 nH
6 4 2 0 100 1000
5.60 nH
Frequency (MHz)
Frequency (MHz)
Typical Q vs Frequency - 0906 Series
250
2.55 nH 1.65 nH 3.85 nH 5.40 nH
Typical Q vs Frequency - 1606 Series
250
7.15 nH 8.80 nH 5.60 nH 12.55 nH 9.85 nH
200
200
Q factor
Q factor
150
150
100
100
50
50
0 100 1000
0 100 1000
Frequency (MHz)
Frequency (MHz)
Typical Irms Derating
120 110 100
Percent of rated Irms
90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140
25C
Ambient temperature (C)
Specifications subject to change without notice. Please check our website for latest information.
Document 163-2
Revised 10/29/08
(c) Coilcraft, Inc. 2009

▲Up To Search▲

Price & Availability of 0906-5-L

	To Download 0906-5-L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .