 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Midium Power Transistors (50V / 2A) 2SCR553P Structure NPN Silicon epitaxial planar transistor Features 1) Low saturation voltage, typically VCE (sat) = 0.13V (Max.) (IC / IB= 700mA / 35mA) 2) High speed switching Applications Driver Packaging specifications Package Taping Type Code T100 Basic ordering unit (pieces) 1000 2SCR553P Absolute maximum ratings (Ta = 25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage DC Collector current Pulsed Power dissipation Junction temperature Range of storage temperature *1 Pw=10ms, Single Pulse *2 Each terminal mounted on a recommended land. *3 Mounted on a ceramic board. (40x40x0.7mm) Dimensions (Unit : mm) (1) (2) (3) Abbreviated symbol : NG Inner circuit (Unit : mm) (2) (1) Symbol VCBO VCEO VEBO IC ICP *1 P *2 D Limits 50 50 6 2 4 0.5 2 150 -55 to 150 Unit V V V A A W W C C (1) Base (2) Collector (3) Emitter (3) PD Tj Tstg *3 www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 1/4 2009.12 - Rev.A 2SCR553P Electrical characteristic (Ta = 25C) Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current Collector-emitter staturation voltage DC current gain Transition frequency Collector output capacitance Turn-on time Storage time Fall time *1 Pulsed *2 See switching time test circuit Data Sheet Symbol BVCEO BVCBO BVEBO ICBO IEBO *1 VCE(sat) hFE fT *1 Cob ton *2 tstg *2 tf *2 Min. 50 50 6 180 - Typ. 130 360 12 45 420 75 Max. 1 1 350 450 - Unit V V V A A MHz pF ns ns ns Conditions IC= 1A IC= 100A IE= 100A VCB= 50V VEB= 4V VCE= 2V, IC= 50mA VCE= 10V IE=-300mA, f=100MHz VCB= 10V, IE=0A f=1MH IC= 1A,IB1= 100mA, IB2=-100mA,VCC ~ 10V _ mV IC= 700mA, IB= 35mA www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/4 2009.12 - Rev.A 2SCR553P Electrical characteristic curves 5mA 3.0mA 0.50 2.5mA 2.0mA 1.5mA 1000 Ta=25C 1000 VCE=2V Data Sheet COLLECTOR CURRENT : IC[A] 0.45 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 0.5 1 Ta=25C 1.5 2 0.5mA 1.0mA 100 VCE=5V 2V DC CURRENT GAIN : hFE DC CURRENT GAIN : hFE 0.40 100 Ta=125C 75C 25C -40C 10 1 10 100 1000 10000 10 1 10 100 1000 10000 COLLECTOR CURRENT : IC[mA] Fig3. DC Current Gain vs. Collector Current ( ) COLECTOR TO EMITTER VOLTAGE : VCE[V] Fig.1 Typical Output Characteristics COLLECTOR CURRENT : IC[mA] Fig.2 DC Current Gain vs. Collector Current ( ) COLLECTOR SATURATION VOLTAGE : VCE (sat)[V] COLLECTOR SATURATION VOLTAGE : VCE(sat)[V] 1 Ta=25C 1 IC/IB=20 10000 VCE=2V COLLECTOR CURRENT : IC [mA] 1000 0.1 0.1 100 Ta=125C 75C 25C -40C 0.01 IC/IB=50 20 10 0.01 Ta=125C 75C 25C -40C 10 0.001 1 10 100 1000 10000 COLLECTOR CURRENT : IC[mA] Fig.4 Collector-Emitter Saturation Voltage vs. Collector Current ( ) 0.001 1 10 100 1000 10000 COLLECTOR CURRENT : IC[mA] Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current ( ) 1 0 0.5 1 1.5 BASE TO EMITTER VOLTAGE : VBE[V] Fig.6 Ground Emitter Propagation Characteristics COLLECTOR OUTPUT CAPACITANCE : Cob(pF) 1000 EMITTER INPUT CAPACITANCE : Cib(pF) TRANSITION FREQUENCY : fT[MHz] COLLECTOR CURRENT : IC [A] Cib 100 Ta=25C f=1MHz IE=0A IC=0A 1000 Ta=25C VCE=10V 10 Single pulse 1ms 10ms 1 100ms 100 10 Cob 0.1 DC Ta=25C (Mounted on a recommended land) DC Ta=25C (Mounted on a ceramic board) 0.01 0.1 1 10 1 0.1 1 10 100 10 10 100 EMITTER CURRENT : IE[mA] Fig.8 Gain Bandwidth Product vs. Emitter Current 1000 100 COLLECTOR - BASE VOLTAGE : VCB [V] EMITTER - BASE VOLTAGE : VEB [V] Fig.7 Emitter Input Capacitance vs. Emitter-Base Voltage Collector Output Capacitance vs. Collector-Base Voltage COLLECTOR TO EMITTER VOLTAGE : VCE[V] Fig.9 Safe Operating Area www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 3/4 2009.12 - Rev.A 2SCR553P Switching time test circuit Data Sheet RL=10 VIN IB1 IC IB2 Pw Pw VCC _ ~10V ~ 50s _ DUTY CYCLE1% IB1 BASE CURENT WAVEFORM IB2 ton 90% COLLECTOR CURRENT WAVEFORM 10% tstg tf IC www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 4/4 2009.12 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of 2SCR553P
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |