 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FERROXCUBE DATA SHEET PT23/11 PT, PTS, PTS/I cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube PT, PTS, PTS/I cores and accessories CORE SETS Effective core parameters handbook, halfpage PT23/11 (2311TS) 13.2 min SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of set VALUE 0.470 1740 28.6 61.0 53.6 10.5 UNIT mm-1 mm3 mm mm2 mm2 g 9.7 0.2 5.1 0.1 15.2 18.3 22.9 0.25 0.35 0.45 7.5 11 0.25 0.25 MGB577 Dimensions in mm. Fig.1 PT23/11 core set. Core sets for general purpose transformers and power applications Clamping force for AL measurements, 30 10 N. GRADE 3C81 AL (nH) 160 3% 250 3% 315 3% 400 3% 630 5% 5500 25% 3C91 3F3 5500 25% 160 3% 250 3% 315 3% 400 3% 630 5% 3700 25% e 60 93 118 149 235 2050 2050 60 93 118 149 235 1380 AIR GAP (m) 580 350 270 200 120 0 0 580 350 270 200 120 0 TYPE NUMBER PT23/11-3C81-A160 PT23/11-3C81-A250 PT23/11-3C81-A315 PT23/11-3C81-A400 PT23/11-3C81-A630 PT23/11-3C81 PT23/11-3C91 PT23/11-3F3-A160 PT23/11-3F3-A250 PT23/11-3F3-A315 PT23/11-3F3-A400 PT23/11-3F3-A630 PT23/11-3F3 2008 Sep 01 1056 Ferroxcube PT, PTS, PTS/I cores and accessories Core sets of high permeability grades Clamping force for AL measurements, 30 10 N. GRADE 3E27 AL (nH) 8400 25% e 3 130 AIR GAP (m) 0 PT23/11 (2311TS) TYPE NUMBER PT23/11-3E27 Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 320 315 f = 25 kHz; B = 200 mT; T = 100 C 0.4 - - CORE LOSS (W) at f = 100 kHz; B = 100 mT; T = 100 C - 0.09(1) 0.19 f = 100 kHz; B = 200 mT; T = 100 C - 0.7 (1) - f = 400 kHz; B = 50 mT; T = 100 C - - 0.33 3C81 3C91 3F3 Note 1. Measured at 60 C. 2008 Sep 01 1057 Ferroxcube PT, PTS, PTS/I cores and accessories COIL FORMERS General data 10-pins PT23/11 coil former PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION PT23/11 (2311TS) polyamide (PA), glass-reinforced, flame retardant in accordance with "UL 94V-0" ; UL file number E41938(M) copper-tin alloy (CuSn), tin (Sn) plated 130 C, "IEC 60085" class B "IEC 68-2-20" , Part 2, Test Tb, method 1B, 350 C, 3.5 s "IEC 68-2-20", Part 2, Test Ta, method 1 handbook, full pagewidth 8 max 3.8 1.1 5.16 23.24 10.03 max min 20.32 11.28 17.78 max 19.56 max Dimensions in mm. 5.2 min 9.4 max MGB615 Fig.2 PT23/11 coil former; 10-pins. Winding data and area product for 10-pins PT23/11 coil former NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 15.1 NOMINAL WINDING WIDTH (mm) 5.2 AVERAGE LENGTH OF TURN (mm) 45.2 AREA PRODUCT Ae x Aw (mm4) 921 TYPE NUMBER CPV-PT23/11-1S-10P 2008 Sep 01 1058 Ferroxcube PT, PTS, PTS/I cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS PT23/11 (2311TS) This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 1059 |
Price & Availability of PT23
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |