View DXTP19020DP5_4721208.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

A Product Line of Diodes Incorporated
DXTP19020DP5
20V PNP HIGH GAIN TRANSISTOR PowerDI(R)5
Features ADVANCE INFORMATION
* * * * * * * * 43% smaller than SOT223; 60% smaller than TO252 Maximum height just 1.1mm Rated up to 1.3W VCEO = -20V IC = -8A; ICM = -15A Low Saturation voltage, high gain transistor Lead, Halogen and Antimony Free, RoHS Compliant (Note 1) "Green" Device (Note 2)
Mechanical Data
* * * * * Case: PowerDI 5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.093 grams (approximate)
(R)
Applications
* * Load disconnect switch Battery charging
C
B
Top View Bottom View Device Schematic
E
Pin-out diagram
Ordering Information (Note 3)
Part Number DXTP19020DP5-13
Notes:
Case (R) PowerDI 5
Packaging 5000/Tape & Reel
1. No purposefully added lead. Halogen and Antimony Free. 2. Diodes Inc's "Green" Policy can be found on our website at http://www.diodes.com 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
DTP1920D
YYWWK
DTP1920D = Product Type Marking Code = Manufacturers' Code Marking K = Factory Designator YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 09 for 2009) WW = Week code (01 to 53)
PowerDI is a registered trademark of Diodes Incorporated. DXTP19020DP5
Document number: DS32012 Rev. 3 - 2
1 of 5 www.diodes.com
March 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
DXTP19020DP5
Maximum Ratings
@TA = 25C unless otherwise specified Symbol VCBO VCEO VECO VEBO IC IB ICM Value -25 -20 -4 -7 -8 -1 -15 Unit V V V V A A A
ADVANCE INFORMATION
Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Collector Voltage (Reverse Blocking) Emitter-Base Voltage Continuous Collector Current Base Current Peak Pulse Current
Thermal Characteristics
Characteristic Power Dissipation @ TA = 25C (Note 4) Thermal Resistance, Junction to Ambient Air (Note 4) @TA = 25C Power Dissipation @ TA = 25C (Note 5) Thermal Resistance, Junction to Ambient Air (Note 5) @TA = 25C Operating and Storage Temperature Range
Notes:
Symbol PD RJA PD RJA TJ, TSTG
Value 1.3 96.1 3 41.7 -55 to +150
Unit W C/W W C/W C
4. Device mounted on FR-4 PCB, 2 oz. copper, minimum recommended pad layout. 5. Device mounted on FR-4 PCB, 2 oz. copper, collector pad dimensions 0.42inch2.
Electrical Characteristics
@TA = 25C unless otherwise specified Symbol V(BR)CBO V(BR)CEO V(BR)ECX V(BR)ECO V(BR)EBO ICBO IEBO VCE(sat) VBE(sat) VBE(on) hFE Min -25 -20 -4 -4 -7 300 200 45 Typ -55 -50 -8.6 -8.6 -8.2 <1 <1 -40 -97 -115 -220 -1050 -930 450 290 70 25 176 36 23 18.4 266 49.6 Max 50 0.5 -50 -47 -130 -145 -275 -1150 -1000 900 400 45 Unit V V V V V nA A nA mV mV mV Test Condition IC = -100A IC = -10mA IE = -100A, RBC < 1k or 0.25V > VCB > -0.25V IE = -100A IE = -100A VCB = -25V VCB = -25V, Tamb = 100 C VEB = -5.6V IC = -1A, IB = -100mA IC = -1A, IB = -10mA IC = -2A, IB = -40mA IC = -8A, IB = -800mA IC = -8A, IB = -800mA IC = -8A, VCE = -2V IC = -100mA, VCE = -2V IC = -2A, VCE = -2V IC = -8A, VCE = -2V IC = -15A, VCE = -2V IC = -50mA, VCE = -10V, f = 50MHz VEB = -0.5V, f = 1MHz VCB = -10V, f = 1MHz IC = -1A, VCC = -10V, IB1 = -IB2 = -50mA
Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 6) Emitter-Collector Breakdown Voltage (Reverse Blocking) Emitter-Base Breakdown Voltage (Reverse Blocking) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector-Emitter Saturation Voltage (Note 6) Base-Emitter Saturation Voltage (Note 6) Base-Emitter Turn-On Voltage (Note 6) DC Current Gain (Note 6)
Transition Frequency Input Capacitance (Note 6) Output Capacitance (Note 6) Delay Time Rise Time Storage Time Fall Time
Notes: 6. Pulse Test: Pulse width 300s. Duty cycle 2.0%.
fT Cibo Cobo td tr ts tf
MHz pF pF
ns
PowerDI is a registered trademark of Diodes Incorporated. DXTP19020DP5
Document number: DS32012 Rev. 3 - 2
2 of 5 www.diodes.com
March 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
DXTP19020DP5
Typical Characteristic
ADVANCE INFORMATION
1
Tamb=25C IC/IB=100
0.4
IC/IB=10
0.3
- VCE(SAT) (V)
IC/IB=50
- VCE(SAT) (V)
100m
0.2
100C
150C
10m
IC/IB=20 IC/IB=10
0.1
25C
1m 1m
10m
100m
1
10
0.0 10m
-55C
100m
1
10
- IC Collector Current (A)
- IC Collector Current (A)
VCE(SAT) v IC
1.2 1.6
150C VCE=2V
VCE(SAT) v IC
800 700
IC/IB=10
Normalised Gain
- VBE(SAT) (V)
1.2 1.0 0.8 0.6 0.4 0.2 0.0 1m
100C
600 500
Typical Gain (hFE)
1.4
1.0 0.8 0.6 0.4 0.2 1m
25C
-55C
25C
400 300
150C 100C
-55C
200 100
10m
100m
1
10
0
10m
100m
1
10
- IC Collector Current (A)
- IC Collector Current (A)
hFE v IC
VBE(SAT) v IC
100
f = 1MHz
1.2
VCE=2V
Capacitance (pF)
1.0
25C
-55C
80 60 40 20 0
Cobo
- VBE(ON) (V)
0.8 0.6 0.4
100C 150C
0.2 1m
10m
100m
1
10
2
4
6
8
10 12 14 16 18 20
- IC Collector Current (A)
- Voltage(V)
VBE(ON) v IC
Capacitance v Voltage
PowerDI is a registered trademark of Diodes Incorporated. DXTP19020DP5
Document number: DS32012 Rev. 3 - 2
3 of 5 www.diodes.com
March 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
DXTP19020DP5
Package Outline Dimensions ADVANCE INFORMATION
A D b2 A2 D2
L
E
E1
E2
W L1 e b1 b1 A2
PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm
(R)
Suggested Pad Layout
Z C
X2
E1 X1 Y1
Dimensions Z X1 X2 Y1 Y2 C E1
Value (in mm) 6.6 1.4 3.6 0.8 4.7 3.87 0.9
Y2
PowerDI is a registered trademark of Diodes Incorporated. DXTP19020DP5
Document number: DS32012 Rev. 3 - 2
4 of 5 www.diodes.com
March 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
DXTP19020DP5
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2009, Diodes Incorporated www.diodes.com
ADVANCE INFORMATION
PowerDI is a registered trademark of Diodes Incorporated. DXTP19020DP5
Document number: DS32012 Rev. 3 - 2
5 of 5 www.diodes.com
March 2010
(c) Diodes Incorporated

▲Up To Search▲

Price & Availability of DXTP19020DP5

	To Download DXTP19020DP5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .