View TMCM-103_4780802.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MODULES F O R S T E P P E R M O T O R S
M O D U LES
TMCM-1 03
1-Ax is Con trol ler / Dr iver 2.0 A / 28.5 V wit h En code r In f.
1 0 mm
M A IN CH A R AC T ER IS T IC S
INFO
The TMCM-103 is a single axis 2-phase stepper motor controller and driver module. The built in encoder feedback makes it an optimum solution for high-reliability drives. It provides a complete motion control solution at a very small size for embedded applications. The board can be connected to a baseboard or customized electronics with its pin connectors. The TMCM-103 comes with the PC based software development environment TMCL-IDE for the Trinamic Motion Control Language (TMCL). Using predefined TMCL high level commands like move to position" or constant rotation" rapid and fast development of motion control applications is guaranteed. In addition CANopen is available for this product. The TMCM-103 can be controlled via RS-232 and via CAN. Communication traffic is kept very low since all time critical operations, e.g. ramp calculation, are performed on board. The TMCL program can be stored in the on-board EEPROM for stand-alone operation. The firmware of the module can be updated via the RS-232 or the CAN interface. With the StallGuardTM feature it is possible to detect motor overload or motor stall.
ELECTRICAL DATA
* up to 2.0A coil current RMS (2.8A peak) * 7V to 28.5V motor supply voltage * two-phase bipolar motors with 1A to 2.0A coil current * incremental encoder (2 or 3 channel) * RS232 and CAN 2.0b host interface * inputs for reference and stop switches * general purpose analog and digital I/Os * dip-switches to adjust CAN-ID * 64 times microstepping * memory for 2048 TMCL commands * ready for CANopen * automatic ramp generation in hardware * on the fly alteration of motion parameters (e.g. position, velocity, acceleration) * closed loop for highly dependable drives possible * stallGuardTM for sensorless motor stall detection * chopSyncTM for high motor velocity * 2 x 16 pin connectors carry all signals * RoHS compliant * size: 43x49.53 mm
SUPPORTED MOTORS
INTERFACE
FEATURES
OTHER
CAN
programmable
Motion Controller
RS-232
TMCM-103
7...28.5V DC
high power
Driver
TMC249
with TMC428
CANopen Address Selector
MOSFET Driver Stage
Encoder Interface
Step Motor
ABN
Encoder
5V Power Supply
TMCL Memory
OR DE R C O DE
D E SC R I P T IO N
TMCM-103 (-option) Related products:
OP TI O NS
1-axis controller / driver 2.8A, 28.5V BB-103
TMCL CANopen
TMCL firmware CANopen firmware
www.trinamic.com - for detailed information and datasheets
81

▲Up To Search▲

Price & Availability of TMCM-103

	To Download TMCM-103 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .