|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
53.34mm [2.100"] 53.34mm [2.100"] Top View 6 26.64mm [1.049"] 1 4 34.44mm[1.356"] assembled Side View 3 5 1 Substrate: 1.59mm 0.18mm [0.0625" 0.007"] FR4/G10 or equivalent high temp material. 17m [1/2 oz.] Cu clad. SnPb plating. Substrate: 3.18mm 0.18mm [0.125" 0.007"] FR4/G10 or equivalent high temp material. Non-clad. Pins: material- Brass Alloy 360 1/2 hard; finish0.25m [10"] Au over 1.27m [50"] Ni (min.). 4 Pins: shell material- Brass Alloy 360 1/2 hard; finish- 0.25m [10"] Au over 1.27m [50"] Ni (min.). Contact material- BeCu; finish 0.25m [10"] Au over 2.54m [100"] Ni (min. ). Leads: material- BeCu Alloy 194; plating- 60/40 SnPb 3.80-10.16m [150-400"]. Test points: material- Phosphor Bronze; plating- Sn over 1.27m [50"] Ni. Gold flash on contact end. 2 3 5 6 Description: CARRIER ADAPTOR 84 position PLCC ZIF socket with test points to 84 position PLCC plug. Tolerances: diameters 0.03mm [0.001"], PCB perimeters 0.13mm [0.005"], PCB thicknesses 0.18mm [0.007"], pitches (from true position) 0.08mm [0.003"], all other tolerances 0.13mm [0.005"] unless stated otherwise. CA-PLCC084-Z-P-T-01 Dwg (c) 1993 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Released Drawing: 6/10/93 FileCA-PLCC084-Z-P-T-01 Dwg Scale: 4:3 Rev: D Date: 9/30/96 Modified:3/31/00 |
Price & Availability of CA-PLCC084-Z-P-T-01 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |