 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MITSUBISHI IGBT MODULES CM600HA-5F HIGH POWER SWITCHING USE INSULATED TYPE H J K G F E D W - DIA. (4 TYP.) y E PQ E G x C N M L C B A U - THD. (2 TYP.) R V -THD. (2 TYP.) T S Description: Mitsubishi IGBT Modules are designed for use in switching applications. Each module consists of one IGBT in a single configuration, with a reverse connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. Features: Low Drive Power Low VCE(sat) Discrete Super-Fast Recovery Free-Wheel Diodes High Frequency Operation Isolated Baseplate for Easy Heat Sinking Applications: UPS Forklift E E C G Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M Inches 4.25 3.66 0.63 0.30 0.69 1.14 0.79 0.94 0.31 0.24 2.44 1.89 Millimeters 108.0 93.00.25 16.0 7.5 17.5 29.0 20.0 24.0 7.9 6.0 62.0 48.0 Dimensions N P Q R S T U V W X Y Inches 0.39 0.39 0.51 0.33 1.42 1.02 M6 Metric M4 Metric 0.26 0.79 0.35 Millimeters 10.0 10.0 13.0 8.5 36.0 -0.5 25.8 -0.5 M6 M4 Dia. 6.5 20.0 9.0 +1.0 +1.0 Ordering Information: Example: Select the complete nine digit module part number you desire from the table below - i.e. CM600HA-5F is a 250V (VCES), 600 Ampere Single IGBT Module. Type CM Current Rating Amperes 600 VCES Volts (x 50) 5 Sep.2000 MITSUBISHI IGBT MODULES CM600HA-5F HIGH POWER SWITCHING USE INSULATED TYPE Absolute Maximum Ratings, Tj = 25C unless otherwise specified Symbol Junction Temperature Storage Temperature Collector-Emitter Voltage (G-E Short) Gate-Emitter Voltage (C-E Short) Collector Current (TC = 25C) Peak Collector Current (Tj 150C) Emitter Current** (TC = 25C) Peak Emitter Current** Maximum Collector Dissipation (TC = 25C) Mounting Torque, M6 Main Terminal Mounting Torque, M6 Mounting Mounting Torque, M4 Terminal Weight Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) *Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max) rating. **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Ratings -40 to 150 -40 to 125 250 20 600 1200 600 1200 960 1.96 ~ 2.94 1.96 ~ 2.94 0.98 ~ 1.47 400 2500 Units C C Volts Volts Amperes Amperes Amperes Amperes Watts N*m N*m N*m Grams Vrms Tj Tstg VCES VGES IC ICM IE IEM Pc -- -- -- -- Viso Static Electrical Characteristics, Tj = 25C unless otherwise specified Characteristics Collector-Cutoff Current Gate Leakage Current Gate-Emitter Threshold Voltage Collector-Emitter Saturation Voltage Symbol ICES IGES VGE(th) VCE(sat) QG VEC Test Conditions VCE = VCES, VGE = 0V VGE = VGES, VCE = 0V IC = 60mA, VCE = 10V IC = 600A, VGE = 10V, IC = 600A, VGE = 10V, Tj = 150C Total Gate Charge Emitter-Collector Voltage VCC = 100V, IC = 600A, VGE = 10V IE = 600A, VGE = 0V Min. -- -- 3.0 -- -- -- -- Typ. -- -- 4.0 1.2 1.1 2200 -- Max. 1.0 0.5 5.0 1.7** -- -- 2.0 Units mA A Volts Volts Volts nC Volts ** Pulse width and repetition rate should be such that device junction temperature rise is negligible. Dynamic Electrical Characteristics, Tj = 25C unless otherwise specified Characteristics Input Capacitance Output Capacitance Reverse Transfer Capacitance Resistive Load Switching Times Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Symbol Cies Coes Cres td(on) tr td(off) tf trr Qrr VCC = 100V, IC = 600A, VGE1 = VGE2 = 10V, RG = 4.2, Resistive Load IE = 600A, diE/dt = -1200A/s IE = 600A, diE/dt = -1200A/s VGE = 0V, VCE = 10V Test Conditions Min. -- -- -- -- -- -- -- -- -- Typ. -- -- -- -- -- -- -- -- 9.5 Max. 165 7.5 5.6 1000 4000 1000 500 300 -- Units nF nF nF ns ns ns ns ns C Diode Reverse Recovery Time Diode Reverse Recovery Charge Thermal and Mechanical Electrical Characteristics, Tj = 25C unless otherwise specified Characteristics Thermal Resistance, Junction to Case Thermal Resistance, Junction to Case Contact Thermal Resistance Symbol Rth(j-c) Rth(j-c) Rth(c-f) Test Conditions Per IGBT Free Wheel Diode Per Module, Thermal Grease Applied Min. -- -- -- Typ. -- -- -- Max. 0.13 0.19 0.040 Units C/W C/W C/W Sep.2000 MITSUBISHI IGBT MODULES CM600HA-5F HIGH POWER SWITCHING USE INSULATED TYPE OUTPUT CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 1200 COLLECTOR CURRENT, IC, (AMPERES) 1000 VGE = 15V 1000 800 600 400 200 0 5.5 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 10 8 6 COLLECTOR CURRENT, IC, (AMPERES) Tj = 25oC 5.75 1200 VCE = 10V Tj = 25C Tj = 125C 2.0 VGE = 15V Tj = 25C Tj = 125C 1.5 800 600 5.25 1.0 400 5.0 0.5 200 0 0 1 2 4.5 4.75 0 0 2 4 6 8 10 0 200 400 600 800 1000 1200 GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-CURRENT, IC, (AMPERES) 3 4 5 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) 5 Tj = 25C COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) EMITTER CURRENT, IE, (AMPERES) 104 Tj = 25C CAPACITANCE, Cies, Coes, Cres, (nF) 103 VGE = 0V 4 103 Cies 102 3 IC = 600A IC = 1200A 2 102 101 Coes Cres 1 IC = 240A 0 0 5 10 15 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 101 0.6 0.8 1.0 1.2 1.4 1.6 1.8 100 10-1 100 101 102 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CURRENT, Irr, (AMPERES) GATE CHARGE, VGE 104 REVERSE RECOVERY TIME, t rr, (ns) 103 VCC = 100V VGE = 10V RG = 4.2 Tj = 125C di/dt = -1200A/sec Tj = 25C 103 20 IC = 600A GATE-EMITTER VOLTAGE, VGE, (VOLTS) SWITCHING TIME, (ns) 15 VCC = 50V VCC = 100V t rr 103 td(off) td(on) 102 Irr 102 10 tf 5 tr 102 101 102 COLLECTOR CURRENT, IC, (AMPERES) 103 101 101 102 EMITTER CURRENT, IE, (AMPERES) 101 103 0 0 1 2 3 4 5 GATE CHARGE, QG, (nC) Sep.2000 MITSUBISHI IGBT MODULES CM600HA-5F HIGH POWER SWITCHING USE INSULATED TYPE TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-c) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-c) 101 Single Pulse TC = 25C Per Unit Base = R th(j-c) = 0.13C/W 101 Single Pulse TC = 25C Per Unit Base = R th(j-c) = 0.19C/W 100 100 10-1 10-1 10-2 10-2 10-3 10-3 10-2 10-1 TIME, (s) 100 101 10-3 10-3 10-2 10-1 TIME, (s) 100 101 Sep.2000 |
Price & Availability of CM600HA-5F00
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |