View 1210L005_4807253.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

POLYFUSE(R) Resettable PTCs
Surface Mount
1210L Series
Description The 1210L series device provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features * RoHS compliant and lead-free * Fast response to fault currents * Compact design saves board space Applications * USB peripherals * Disk drives * CD-ROMs * PC motherboards - plug and play protection * Mobile phones - battery and port protection * PDAs / digital cameras * Game console port protection * Low resistance * Low-profile * Compatible with high temperature solders
Agency Approvals
AGENCY AGENCY FILE NUMBER E183209 R50082521
Electrical Characteristics
I hold (A) 0.05 0.10 0.20 0.35 0.50 0.75 1.10 1.50 I trip (A) 0.15 0.30 0.40 0.70 1.00 1.50 2.20 3.00 V max (Vdc) 30 30 30 6 13.2 6 6 6 I max (A) 10 10 10 100 100 100 100 100 Pd max. (W) 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 Maximum Time To Trip Current (A) 0.25 0.50 8.00 8.00 8.00 8.00 8.00 8.00 Time (Sec.) 1.50 1.50 0.02 0.20 0.10 0.10 0.30 0.50 R min () 3.600 1.600 0.800 0.320 0.250 0.130 0.060 0.040 Resistance R typ () 25.00 7.000 2.900 0.810 0.550 0.290 0.140 0.070 R 1max () 50.00 15.00 5.000 1.300 0.900 0.400 0.210 0.110 X X X X X X X X X X X X X X X X Agency Approvals
Part Number
Marking
1210L005 1210L010 1210L020 1210L035 1210L050 1210L075 1210L110 1210L150
A B C E F G H K
I hold = Hold current: maximum current device will pass without tripping in 20C still air. I trip = Trip current: minimum current at which the device will trip in 20C still air. V max = Maximum voltage device can withstand without damage at rated current (I max) I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) P d = Power dissipated from device when in the tripped state at 20C still air. R min = Minimum resistance of device in initial (un-soldered) state.
R typ = Typical resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 20C measured one hour after tripping or reflow soldering of 260C for 20 sec. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame.
1210L Series Specifications are subject to change without notice.
1 Electronics Designers Guide
www.littelfuse.com (c)2006 Littelfuse
POLYFUSE(R) Resettable PTCs
Surface Mount
Temperature Rerating
Ambient Operation Temperature -40C Part Number 1210L005 1210L010 1210L020 1210L035 1210L050 1210L075 1210L110 1210L150 0.08 0.16 0.29 0.47 0.76 1.00 1.69 2.13 0.07 0.14 0.26 0.45 0.67 0.97 1.48 1.92 0.06 0.12 0.22 0.40 0.58 0.86 1.29 1.71 0.05 0.10 0.20 0.35 0.50 0.75 1.10 1.50 -20C 0C 23C 40C Hold Current (A) 0.04 0.08 0.16 0.33 0.43 0.64 0.88 1.26 0.04 0.07 0.14 0.28 0.40 0.59 0.76 1.14 0.03 0.06 0.13 0.24 0.36 0.54 0.65 1.01 0.03 0.05 0.11 0.21 0.32 0.48 0.57 0.89 0.02 0.03 0.08 0.18 0.28 0.40 0.43 0.71 50C 60C 70C 85C
1210L Series
Average Time Current Curves
0.350A 0.500A 0.050A 0.100A 0.200A 0.750A 1.10A 1.50A
Temperature Rerating Curve
170% 150% Percentage of Rated Current 130% 110% 90% 70% 50% 30% 10% -40 -30 -20 -10 0 10 20 30 40 Temperature (C) 50 60 70 80
100000
10000
1000
TIME IN SECONDS
100
10
1
0.100
0.010
0.001 0.02 0.100 1 10 100
CURRENT IN AMPERES
Specifications are subject to change without notice.
Note: 1.00 means the number one with two decimal places. AKL V3.9 06.05.10
The average time current curves and temperature rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application.
1210L Series Specifications are subject to change without notice.
2 Electronics Designers Guide
www.littelfuse.com (c)2006 Littelfuse
POLYFUSE(R) Resettable PTCs
Surface Mount
Soldering Parameters
Condition Peak Temp/ Duration Time Time above liquids (TAL) 220C Preheat 120C~ 180C Storage Condition Reflow 260C / 10 Sec 60 Sec ~ 100 Sec
Temperature (C) 260 220 Soldering Cooling
50 Sec ~ 150 Sec 0C~35C, < 70%RH =
* Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead-free * Devices are not designed to be wave soldered to the bottom side of the board. * Recommended maximum paste thickness is 0.25mm (0.010 inch) * Devices can be cleaned using standard industry methods and solvents. Note: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements.
180 120
Preheating
0
50 to 150
60 to 100 Time(s)
120
Physical Specifications
Terminal Material Lead Solderability Solder-Plated Copper (Solder Material: Matte Tin (Sn)) Meets EIA Specification RS186-9E, ANSI/ J-STD-002 Category 3.
Environmental Specifications
Operating/Storage Temperature Maximum Device Surface Temperature in Tripped State Passive Aging Humidity Aging -40C to +85C 125C +85C, 1000 hours 5% typical resistance change +85C, 85%R.H. 1000 hours 5% typical resistance change MIL-STD-202 Method 107G +85C/-40C 20 times -30% typical resistance change MIL-STD-202, Method 215 No change MIL-STD-883C, Method 2007.1, Condition A No change
Thermal Shock
Solvent Resistance
Vibration
1210L Series Specifications are subject to change without notice.
Electronics Designers Guide
www.littelfuse.com (c)2006 Littelfuse
POLYFUSE(R) Resettable PTCs
Surface Mount
Dimensions
MARKING CODE VARIES WITH AMPERAGE RATING (SEE CHART) SHOWN IS 1.5AMP RATING
A
C
Top View
K
D
B
Side View
Bottom View
Pad Layout
E
2.00 mm (.079)
2.50 mm (.098)
1.00 mm (.040)
A Part Number 1210L005 1210L010 1210L020 1210L035 1210L050 1210L075 1210L110 1210L150 Inches 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 mm 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.43 3.43 3.43 3.43 3.43 3.43 3.43 3.43 Inches 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.11
B mm 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.80 2.80 2.80 2.80 2.80 2.80 2.80 2.80 Inches 0.03 0.03 0.02 0.02 0.02 0.02 0.04 0.03 0.05 0.05 0.04 0.03 0.03 0.03 0.05 0.07
C mm 0.75 0.75 0.60 0.50 0.50 0.50 0.90 0.80 1.25 1.25 1.00 0.85 0.85 0.85 1.30 1.80 Min. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
D Inches mm Min. Inches
E mm 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 Min Max. Min. Max.
Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.
0.25 0.008 0.02 0.25 0.008 0.02 0.25 0.008 0.02 0.25 0.008 0.02 0.25 0.008 0.02 0.25 0.008 0.02 0.25 0.008 0.02 0.25 0.008 0.02
Part Numbering System
1210 L 110 W R
PACKAGING STYLE R: Tape & Reel QUANTITY CODE: W=3000 Y=4000 I HOLD HOLD CURRENT CODE (SEE TABLE BELOW) L: LITTELFUSE SURFACE MOUNT PPTC SIZE
SERIES
Packaging
I hold (A) 0.05 0.10 0.20 0.35 0.50 0.75 1.10 1.50
1210L Series Specifications are subject to change without notice.
I hold Code 005 010 020 035 050 075 110 150
Packaging Option Tape and Reel Tape and Reel Tape and Reel Tape and Reel Tape and Reel Tape and Reel Tape and Reel Tape and Reel
Quantity 3000 3000 3000 4000 4000 4000 3000 2000
Quantity & Packaging Codes WR WR WR YR YR YR WR PR
www.littelfuse.com (c)2006 Littelfuse
Electronics Designers Guide

▲Up To Search▲

Price & Availability of 1210L005

	To Download 1210L005 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .