 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Electric Double Layer Capacitors (Gold Capacitor)/ SE Stacked Coin Type Series: SE Features Endurance : 70 C 1000 h Automatic insertion available RoHS directive compliant Recommended Applications Memory back-up for video and audio equipment, cameras, telephones, printers, data terminals, rice cookers and intelligent remote controls. Specifications Category Temp. Range Maximum Operating Voltage Nominal Cap.Range Characteristics at Low Temperature Endurance Shelf Life -25 C to +70 C 5.5 V.DC 0.022 F to 0.22 F Capacitance change 30 % of initial measured value at +20 C (-25 C to +70 C) Internal resistance <5 times of initial measured value at +20 C (at -25 C) After 1000 hours application of 5.5 V. DC at +70 C, the capacitor shall meet the following limits. Capacitance change 30 % of initial measured value Internal resistance <4 times of initial specified value After 1000 hours storage at +70C without load, the capacitor shall meet the specified limits for Endurance. Dimensions in mm(not to scale) 5.40.8 P2 13.0 max. P oh 10.5 max. oh1 Dimensions d P0 F W W0 W1 W2 H D0 P P1 P2 h, h1 H1 Nominal 0.55 12.7 5.0 18.0 5.5< 9.0 0 to 3.0 18.0 4.0 12.7 3.85 6.35 0 28.5< Tolerance 0.05 0.2 +0.8 -0.2 H1 - P1 F + H W2 d - + P0 D0 Expected dimensions of the capacitor above the board after soldering 0.5 - 0.5 - 0.5 0.2 1.0 0.50 1.00 1.0 - Standard Products Maximum Operating Voltage (V.DC) Capacitance (F) 0.022 0.047 0.10 0.22 Capacitance range (F) 0.0176 to 0.0396 0.0376 to 0.0846 0.080 to 0.180 0.176 to 0.396 Internal resistance ( ) at 1kHz < 150 < 120 < 75 < 75 Part number EECSE0H223 EECSE0H473 EECSE0H104 EECSE0H224 Min. Packaging Q'ty (pcs) 1000 1000 1000 1000 5.5 Note: 1. When ordering please observe the minimum packaging quantity. 2. When the surface mount component goes through UV or a heat oven to affix the adhesive glue, the capacitor's surface temperature should not exceed 100 C for more than 60 seconds (maximum temperature should not exceed 105 C) 3. Do not use reflow soldering. (IR, Atmosphere heating methods, etc.) Please refer to P197 "Mounting Specifications". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. W W0 W1 Jan. 2008 |
Price & Availability of EECSE0H104
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |