![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APT15F60B APT15F60S 600V, 16A, 0.43 Max, Trr 190nS N-Channel FREDFET POWER MOS 8(R) is a high speed, high voltage N-channel switch-mode power MOSFET. This 'FREDFET' version has a drain-source (body) diode that has been optimized for high reliability in ZVS phase shifted bridge and other circuits through reduced trr, soft recovery, and high recovery dv/dt capability. Low gate charge, high gain, and a greatly reduced ratio of Crss/Ciss result in excellent noise immunity and low switching loss. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control di/dt during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. TO -2 47 D3PAK APT15F60B APT15F60S D Single die FREDFET G S FEATURES * Fast switching with low EMI * Low trr for high reliability * Ultra low Crss for improved noise immunity * Low gate charge * Avalanche energy rated * RoHS compliant TYPICAL APPLICATIONS * ZVS phase shifted and other full bridge * Half bridge * PFC and other boost converter * Buck converter * Single and two switch forward * Flyback Absolute Maximum Ratings Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25C Continuous Drain Current @ TC = 100C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive 1 Ratings 16 10 54 30 405 7 Unit A V mJ A Thermal and Mechanical Characteristics Symbol PD RJC RCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) Package Weight 0.22 6.2 10 1.1 -55 0.15 150 300 Min Typ Max 290 0.43 Unit W C/W C 5-2009 050-8172 Rev B oz g in*lbf N*m Torque Mounting Torque ( TO-247 Package), 6-32 or M3 screw Microsemi Website - http://www.microsemi.com Static Characteristics Symbol VBR(DSS) VBR(DSS)/TJ RDS(on) VGS(th) VGS(th)/TJ IDSS IGSS TJ = 25C unless otherwise specified Test Conditions VGS = 0V, ID = 250A Reference to 25C, ID = 250A VGS = 10V, ID = 6A VGS = VDS, ID = 1mA VDS = 400V VGS = 0V TJ = 25C TJ = 125C APT15F60B_S Typ 0.57 0.34 4 -10 Max Unit V V/C V mV/C A nA Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance 3 Min 600 Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current 2.5 0.43 5 100 500 100 VGS = 30V Dynamic Characteristics Symbol gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf 4 TJ = 25C unless otherwise specified Test Conditions VDS = 50V, ID = 7A VGS = 0V, VDS = 25V f = 1MHz Parameter Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related Min Typ 14 2882 29 264 141 Max Unit S pF VGS = 0V, VDS = 0V to 400V 5 Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time VGS = 0 to 10V, ID = 7A, VDS = 300V Resistive Switching VDD = 400V, ID = 7A RG = 10 6 , VGG = 15V 73 72 15 30 16 19 49 15 nC ns Source-Drain Diode Characteristics Symbol IS ISM VSD trr Qrr Irrm dv/dt Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Peak Recovery dv/dt Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Min D Typ Max 15 Unit G S A 54 1.0 190 354 V ns C A 20 V/ns ISD = 7A, TJ = 25C, VGS = 0V TJ = 25C TJ = 125C ISD = 7A 3 diSD/dt = 100A/s VDD = 100V TJ = 25C TJ = 125C TJ = 25C TJ = 125C ISD 7A, di/dt 1000A/s, VDD = 400V, TJ = 125C 167 295 0.59 1.40 6.2 8.5 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25C, L = 16.4mH, RG = 25, IAS = 7A. 3 Pulse test: Pulse Width < 380s, duty cycle < 2%. Rev B 5-2009 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -3.43E-8/VDS^2 + 1.44E-8/VDS + 5.38E-11. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. 050-8172 Typical Performance Curves 60 50 ID, DRAIN CURRENT (A) 40 30 20 10 0 TJ= 125C TJ= 25C ID, DRAIN CURRENT (A) TJ= 55C V GE APT15F60B_S 25 T = 125C J = 10V 13 & 15V 20 15 6V 10 5.5V 5 5V 4.5V 35 TJ= 150C 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) FIGURE 1, Output Characteristics NORMALIZED TO VGS = 10V @ 7A 0 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) FIGURE 2, Output Characteristics VDS> ID(ON) x RDS(ON) MAX. RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 60 50 ID, DRAIN CURRENT (A) 40 30 20 10 0 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE TJ= 55C TJ= 25C TJ= 125C 0 25 50 75 100 125 150 0 30 g fs, TRANSCONDUCTANCE 25 20 15 10 5 0 TJ, JUNCTION TEMPERATURE (C) FIGURE 3, RDS(ON) vs Junction Temperature 2 4 6 8 10 12 14 VGS , GATE-TO-SOURCE VOLTAGE (V) FIGURE 4, Transfer Characteristics Ciss 10,000 TJ = -55C TJ = 25C TJ = 125C C, CAPACITANCE (pF) 1,000 100 Coss 10 Crss 0 2 4 6 8 10 12 14 16 0 0 100 200 300 400 500 600 ID, DRAIN CURRENT (A) FIGURE 5, Gain vs Drain Current VGS, GATE-TOSOURCE VOLTAGE (V) 14 ID = 7A VDS, DRAIN-TO-SOURCE VOLTAGE (V) FIGURE 6, CAPACITANCE VS DRAIN-TO-SOURCE VOLTAGE 60 ISD, REVERSE DRAIN CURRENT (A) 50 40 30 20 TJ = 150C VDS = 120V VDS = 300V 12 10 8 6 4 2 0 VDS = 480V VSD, SOURCE-TO-DRAIN VOLTAGE (V) FIGURE 8, Reverse Drain Current vs Source-to-Drain Voltage 050-8172 10 20 30 40 50 60 70 80 90 100 Qg, TOTAL GATE CHARGE (nC) FIGURE 7, Gate Charge vs Gate-to-Source Voltage 0 0 0 0.5 1 1.5 2 Rev B 10 5-2009 TJ = 25C 1000 APT15F60B_S TJ = 125C TC = 75C 1000 TJ = 150C TC = 25C ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 100 100 IDM 13s 10 IDM 13s 100s 1ms 10ms Rds(on) 100ms DC line 10 100s 1 Rds(on) 1ms 10ms 100ms DC line 1 Scaling for Different Case & Junction Temperatures: ID = ID(T = 25C)*(TJ - TC)/125 0.1 1 10 100 1000 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area 0.1 C 10 100 1000 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area 1 0.45 ZJC, THERMAL IMPEDANCE (C/W) 0.50 0.35 0.40 0.25 0.30 0.15 0.20 0.05 0 10-5 0.1 0.05 10 -4 D = 0.9 0.7 0.5 Note: PDM 0.3 t1 t2 t1 = Pulse Duration SINGLE PULSE 10 -3 10 -2 Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC t 10 -1 1.0 RECTANGULAR PULSE DURATION (seconds) Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration TO-247 (B) Package Outline e3 100% Sn Plated 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) D3PAK Package Outline Drain (Heat Sink) 4.98 (.196) 5.08 (.200) 1.47 (.058) 1.57 (.062) 15.95 (.628) 16.05(.632) 13.41 (.528) 13.51(.532) 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 1.04 (.041) 1.15(.045) Drain 20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150) Revised 4/18/95 13.79 (.543) 13.99(.551) Revised 8/29/97 11.51 (.453) 11.61 (.457) 0.46 (.018) 0.56 (.022) {3 Plcs} 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 0.020 (.001) 0.178 (.007) 2.67 (.105) 2.84 (.112) 1.27 (.050) 1.40 (.055) 1.98 (.078) 2.08 (.082) 5.45 (.215) BSC {2 Plcs.} Rev B 5-2009 19.81 (.780) 20.32 (.800) 1.22 (.048) 1.32 (.052) 3.81 (.150) 4.06 (.160) (Base of Lead) Gate Drain Source Heat Sink (Drain) and Leads are Plated 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) Source Drain Gate Dimensions in Millimeters (Inches) 050-8172 Microsemi's products are covered by one or more of U.S. patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743, 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. US and Foreign patents pending. All Rights Reserved. |
Price & Availability of APT15F60B
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |