View CLC1006_4876570.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Data Sheet
A m p l i fy t h e H u m a n E x p e r i e n c e
(R)
Comlinear CLC1006
FEATURES n 500MHz -3dB bandwidth at G=2 n 1,400V/s slew rate n 0.02%/0.05 diff. gain/phase error n 300MHz large signal bandwidth n 5.5mA supply current n 5nV/Hz input voltage noise n 100mA output current n Stable for gains 2 n Fully specified at 5V and 5V supplies n CLC1006: Pb-free SOT23-5 and SOIC8 APPLICATIONS n Video line drivers n Imaging applications n Professional cameras n Differential line receivers n Photodiode preamps n Radar or communication receivers
Single, 500MHz Voltage Feedback Amplifier
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
General Description
The COMLINEAR CLC1006 is a high-performance, voltage feedback amplifier that offers bandwidth and slew rate usually found in current feedback amplifiers. The CLC1006 provides 500MHz bandwidth and 1,400V/s slew rate exceeding the requirements of standard-definition television and other multimedia applications. The COMLINEAR CLC1006 high-performance amplifier also provides ample output current to drive multiple video loads. The COMLINEAR CLC1006 is designed to operate from 5V or +5V supplies. It consumes only 5.5mA of supply current. The combination of high-speed, excellent video performance, and 10ns settling time make the CLC1006 well suited for use in many general purpose, high-speed applications including standard definition video and imaging applications.
Typical Application - Driving Dual Video Loads
Rev 1B
Ordering Information
Part Number CLC1006IST5X CLC1006ISO8X CLC1006ISO8 Package SOT23-5 SOIC-8 SOIC-8 Pb-Free Yes Yes Yes RoHS Compliant Yes Yes Yes Operating Temperature Range -40C to +85C -40C to +85C -40C to +85C Packaging Method Reel Reel Rail
Moisture sensitivity level for all parts is MSL-1.
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
Data Sheet
SOT23-5 Pin Configuration
OUT -V S +IN +VS
SOT23-5 Pin Assignments
Pin No. Pin Name OUT -VS +IN -IN +VS Description Output Negative supply Positive input Negative input Positive supply 1 2 3 4 5
1 2 3 +
5
4
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
-IN
SOIC Pin Configuration
SOIC Pin Assignments
Pin No. 1 Pin Name NC -IN1 +IN1 -VS NC OUT +VS NC Description No connect Negative input, channel 1 Positive input, channel 1 Negative supply No connect Output Positive supply No connect
NC -IN1 +IN1 -V S
1 2 3 4
8 7 6 5
NC +VS OUT NC
2 3 4 5 6 7 8
Rev 1B
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
2
Data Sheet
Absolute Maximum Ratings
The safety of the device is not guaranteed when it is operated above the "Absolute Maximum Ratings". The device should not be operated at these "absolute" limits. Adhere to the "Recommended Operating Conditions" for proper device function. The information contained in the Electrical Characteristics tables and Typical Performance plots reflect the operating conditions noted on the tables and plots.
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Parameter Supply Voltage Input Voltage Range Continuous Output Current
Min 0 -Vs -0.5V
Max 14 +Vs +0.5V 100
Unit V V mA
Reliability Information
Parameter Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10s) Package Thermal Resistance 5-Lead SOT23 8-Lead SOIC
Notes: Package thermal resistance (qJA), JDEC standard, multi-layer test boards, still air.
Min -65
Typ
Max 150 150 260
Unit C C C C/W C/W
221 100
ESD Protection
Product Human Body Model (HBM) Charged Device Model (CDM) SOT23-5 2kV 1kV
Recommended Operating Conditions
Parameter Operating Temperature Range Supply Voltage Range Min -40 4.5 Typ Max +85 12 Unit C V
Rev 1B
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
3
Data Sheet
Electrical Characteristics at +5V
TA = 25C, Vs = +5V, Rf = 150, RL = 150 to VS/2, G = 2; unless otherwise noted.
Symbol
BWSS BWLS BW0.1dBSS BW0.1dBLS tR, tF tS OS SR HD2 HD3 THD IP3 SFDR DG DP en in VIO dVIO Ibn dIb PSRR AOL IS RIN CIN CMIR CMRR RO VOUT IOUT
Parameter
-3dB Bandwidth Large Signal Bandwidth 0.1dB Gain Flatness 0.1dB Gain Flatness Rise and Fall Time Settling Time to 0.1% Overshoot Slew Rate 2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Third-Order Intercept Spurious-Free Dynamic Range Differential Gain Differential Phase Input Voltage Noise Input Current Noise Input Offset Voltage Average Drift Input Bias Current Average Drift Power Supply Rejection Ratio Open-Loop Gain Supply Current Input Resistance Input Capacitance Common Mode Input Range Common Mode Rejection Ratio Output Resistance Output Voltage Swing Output Current
Conditions
G = +2, VOUT = 0.2Vpp G = +2, VOUT = 1Vpp G = +2, VOUT = 0.2Vpp G = +2, VOUT = 1Vpp VOUT = 1V step; (10% to 90%) VOUT = 1V step VOUT = 0.2V step 1V step 1Vpp, 5MHz 1Vpp, 5MHz 1Vpp, 5MHz 1Vpp, 10MHz 1Vpp, 5MHz NTSC (3.58MHz), AC-coupled, RL = 150 NTSC (3.58MHz), AC-coupled, RL = 150 > 1MHz > 1MHz
Min
Typ
400 335 50 125 1.4 10 1 650 -60 -67 -59 32 60 0.01 0.01 5 3 0 1.2 3.2 7.5
Max
Units
MHz
Frequency Domain Response
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
MHz MHz MHz ns ns % V/s dBc dBc dB dBm dBc % nV/Hz pA/Hz mV V/C A nA/C dB dB mA M pF V dB V mA
Time Domain Response
Distortion/Noise Response
DC Performance
DC
60 55 5.2
Input Characteristics
Non-inverting 4.5 1.0 1 to 4 DC Closed Loop, DC RL = 150 50 0.1 1 to 4 100
Rev 1B
Output Characteristics
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
4
Data Sheet
Electrical Characteristics at 5V
TA = 25C, Vs = 5V, Rf = 150, RL = 150 to GND, G = 2; unless otherwise noted.
Symbol
BWSS BWLS BW0.1dBSS BW0.1dBLS tR, tF tS OS SR HD2 HD3 THD IP3 SFDR DG DP en ini VIO dVIO Ib dIb PSRR AOL IS RIN CIN CMIR CMRR RO VOUT IOUT
Notes: 1. 100% tested at 25C
Parameter
-3dB Bandwidth Large Signal Bandwidth 0.1dB Gain Flatness 0.1dB Gain Flatness Rise and Fall Time Settling Time to 0.1% Overshoot Slew Rate 2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Third-Order Intercept Spurious-Free Dynamic Range Differential Gain Differential Phase Input Voltage Noise Input Current Noise Input Offset Voltage(1) Average Drift Input Bias Current (1) Average Drift Power Supply Rejection Ratio (1) Open-Loop Gain Supply Current
(1)
Conditions
G = +2, VOUT = 0.2Vpp G = +2, VOUT = 2Vpp G = +2, VOUT = 0.2Vpp G = +2, VOUT = 2Vpp VOUT = 2V step; (10% to 90%) VOUT = 2V step VOUT = 0.2V step 2V step 2Vpp, 5MHz 2Vpp, 5MHz 2Vpp, 5MHz 2Vpp, 10MHz 2Vpp, 5MHz NTSC (3.58MHz), AC-coupled, RL = 150 NTSC (3.58MHz), AC-coupled, RL = 150 > 1MHz > 1MHz
Min
Typ
500 300 50 100 2.4 10 1 1400 -68 -63 -62 32 63 0.02 0.05 5 3
Max
Units
MHz
Frequency Domain Response
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
MHz MHz MHz ns ns % V/s dBc dBc dB dBm dBc % nV/Hz pA/Hz 10 20 mV V/C A nA/C dB dB 10 mA M pF V dB V mA
Time Domain Response
Distortion/Noise Response
DC Performance
-10 -20 DC 40 0 1.2 3.2 7.5 75 61 5.5 Non-inverting 4.5 1.0 3.8 DC Closed Loop, DC RL = 150 (1) 3.0 40 65 0.1 3.6 200
Input Characteristics
Input Resistance Input Capacitance Common Mode Input Range Common Mode Rejection Ratio (1) Output Resistance Output Voltage Swing Output Current
Rev 1B
Output Characteristics
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
5
Data Sheet
Typical Performance Characteristics
TA = 25C, Vs = 5V, Rf = 150, RL = 150 to GND, G = 2; unless otherwise noted. Non-Inverting Frequency Response Inverting Frequency Response
1 6 0 -1 G = -1 G = -2 G = -5 G = -10
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Normalized Gain (dB)
Normalized Gain (dB)
3
-2 -3 -4 -5 -6 -7 VOUT = 0.2Vpp 0.1 1
0 G=2 -3 G=5 G = 10 VOUT = 0.2Vpp -9 0.1 1 10 100 1000
-6
10
100
1000
Frequency (MHz)
Frequency (MHz)
Frequency Response vs. CL
1 0 -1 -2 -3 -4 -5 -6 -7 0.1 1 10 100 1000 VOUT = 0.2Vpp CL = 1000pF Rs = 3.3 CL = 500pF Rs = 6 CL = 100pF Rs = 11 CL = 50pF Rs = 15 CL = 20pF Rs = 20
Frequency Response vs. RL
2 1 0 -1 -2 -3 -4 -5 -6 0.1 1 10 100 1000 VOUT = 0.2Vpp RL = 100 RL = 50 RL = 25 RL = 1k
Normalized Gain (dB)
Normalized Gain (dB)
RL = 500
Frequency (MHz)
Frequency (MHz)
Frequency Response vs. VOUT
3
Frequency Response vs. Temperature
2 1
Rev 1B
Normalized Gain (dB)
Normalized Gain (dB)
0 VOUT = 1Vpp -3 VOUT = 2Vpp VOUT = 4Vpp -6
0 -1 -2 -3 -4 -5 -6 VOUT = 0.2Vpp + 25degC - 40degC + 85degC
-9 0.1 1 10 100 1000
-7 0.1 1 10 100 1000
Frequency (MHz)
Frequency (MHz)
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
6
Data Sheet
Typical Performance Characteristics
TA = 25C, Vs = 5V, Rf = 150, RL = 150 to GND, G = 2; unless otherwise noted. Non-Inverting Frequency Response at VS = 5V
6 0 3 -1 G = -1 G = -2 G = -5 G = -10
Inverting Frequency Response at VS = 5V
1
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Normalized Gain (dB)
Normalized Gain (dB)
-2 -3 -4 -5 -6 -7 VOUT = 0.2Vpp 0.1 1
0 G=2 -3 G=5 G = 10 VOUT = 0.2Vpp -9 0.1 1 10 100 1000
-6
10
100
1000
Frequency (MHz)
Frequency (MHz)
Frequency Response vs. CL at VS = 5V
1 0 -1 -2 -3 -4 -5 -6 -7 0.1 1 10 100 1000 VOUT = 0.2Vpp CL = 1000pF Rs = 3.3 CL = 500pF Rs = 6 CL = 100pF Rs = 11 CL = 50pF Rs = 15 CL = 20pF Rs = 20
Frequency Response vs. RL at VS = 5V
2 1 0 -1 -2 -3 -4 -5 -6 0.1 1 10 100 1000 VOUT = 0.2Vpp RL = 100 RL = 50 RL = 25 RL = 1k
Normalized Gain (dB)
Normalized Gain (dB)
RL = 500
Frequency (MHz)
Frequency (MHz)
Frequency Response vs. VOUT at VS = 5V
3
Frequency Response vs. Temperature at VS = 5V
2 1
Rev 1B
Normalized Gain (dB)
Normalized Gain (dB)
0 VOUT = 1Vpp -3 VOUT = 2Vpp VOUT = 4Vpp -6
0 -1 -2 -3 -4 -5 -6 VOUT = 0.2Vpp + 25degC - 40degC + 85degC
-9 0.1 1 10 100 1000
-7 0.1 1 10 100 1000
Frequency (MHz)
Frequency (MHz)
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
7
Data Sheet
Typical Performance Characteristics - Continued
TA = 25C, Vs = 5V, Rf = 150, RL = 150 to GND, G = 2; unless otherwise noted. Gain Flatness
1.5 1.3 1.1 0.9 0.7 0.5 0.3 0.1 -0.1 -0.3 -0.5 -0.7 -0.9 -1.1 -1.3 -1.5 0.1
Gain Flatness at VS = 5V
0.6 0.5 0.4 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 1 10 100 1000 0.1 1 10 100 1000 VOUT = 2Vpp
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Normalized Gain (dB)
VOUT = 2Vpp
Frequency (MHz)
Normalized Gain (dB)
Frequency (MHz)
-3dB Bandwidth vs. VOUT
650
-3dB Bandwidth vs. VOUT at VS = 5V
500 450
550
-3dB Bandwidth (MHz)
-3dB Bandwidth (MHz)
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
400 350 300 250 200
450
350
250
150
150 0.0 0.5 1.0 1.5 2.0 2.5
VOUT (VPP)
VOUT (VPP)
Closed Loop Output Impedance vs. Frequency
1000
VS = 5.0V
Input Voltage Noise
30
Rev 1B
Input Voltage Noise (nV/Hz)
Output Resistance ()
100 10 1 0.1
25 20 15 10 5 0 0.0001
0.01 10k 100k 1M 10M 100M 1G
0.001
0.01
0.1
1
10
Frequency (Hz)
Frequency (MHz)
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
8
Data Sheet
Typical Performance Characteristics - Continued
TA = 25C, Vs = 5V, Rf = 150, RL = 150 to GND, G = 2; unless otherwise noted. 2nd Harmonic Distortion vs. RL
-40 -50 RL = 150 -60 -70 -80 -90 VOUT = 2Vpp -100 0 5 10 15 20 -100 0 5 10 15 20 RL = 500
3rd Harmonic Distortion vs. RL
-40 -50 -60 -70 RL = 500 -80 -90 VOUT = 2Vpp
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
RL = 150
Distortion (dBc)
Frequency (MHz)
Distortion (dBc)
Frequency (MHz)
2nd Harmonic Distortion vs. VOUT
-50 10MHz -60
3rd Harmonic Distortion vs. VOUT
-50 10MHz -60
Distortion (dBc)
Distortion (dBc)
-70 5MHz -80 1MHz -90
-70
5MHz
-80
1MHz
-90
-100 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3
-100 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3
Output Amplitude (Vpp)
Output Amplitude (Vpp)
CMRR vs. Frequency
0
VS = 5.0V
PSRR vs. Frequency
0 -10 -20
Rev 1B
-10
CMRR (dB)
PSRR (dB)
10k 100k 1M 10M
-20 -30 -40 -50 -60 100M
-30 -40 -50 -60 -70 10k 100k 1M 10M 100M
Frequency (Hz)
Frequency (Hz)
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
9
Data Sheet
Typical Performance Characteristics - Continued
TA = 25C, Vs = 5V, Rf = 150, RL = 150 to GND, G = 2; unless otherwise noted. Small Signal Pulse Response
0.150 0.100 0.050
Small Signal Pulse Response at VS = 5V
2.65 2.60 2.55
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Voltage (V)
0.000 -0.050 -0.100 -0.150 0 20 40 60 80 100 120 140 160 180 200
Voltage (V)
2.50 2.45 2.40 2.35 0 20 40 60 80 100 120 140 160 180 200
Time (ns)
Time (ns)
Large Signal Pulse Response
3 2 1
Large Signal Pulse Response at VS = 5V
4 3.5 3
Voltage (V)
0 -1 -2 -3 0 20 40 60 80 100 120 140 160 180 200
Voltage (V)
2.5 2 1.5 1 0 20 40 60 80 100 120 140 160 180 200
Time (ns)
Time (ns)
Differential Gain & Phase AC Coupled Output
0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 -0.01 -0.02 -0.03 -0.04 -0.05 -0.7 -0.5 -0.3 -0.1 0.1 0.3 0.5 0.7 RL = 150 AC coupled DG DP
Differential Gain & Phase DC Coupled Output
0.15 0.13
Rev 1B
Diff Gain (%) and Diff Phase ()
Diff Gain (%) and Diff Phase ()
0.11 0.09 0.07 0.05 0.03 0.01 -0.01 -0.03 -0.05 -0.7 -0.5 -0.3 -0.1 0.1 0.3 0.5 0.7 RL = 150 DC coupled DG DP
Input Voltage (V)
Input Voltage (V)
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
10
Data Sheet
Typical Performance Characteristics - Continued
TA = 25C, Vs = 5V, Rf = 150, RL = 150 to GND, G = 2; unless otherwise noted. Differential Gain & Phase AC Coupled Output at VS = 2.5V
0.15 0.1 DP 0.05 0 -0.05 -0.1 -0.15 -0.2 -0.35 -0.25 -0.15 -0.05 0.05 0.15 0.25 0.35 RL = 150 AC coupled DG
Differential Gain & Phase DC Coupled at VS = 2.5V
0.15 0.1 0.05 0 -0.05 -0.1 -0.15 -0.2 -0.35 -0.25 -0.15 -0.05 0.05 0.15 0.25 0.35 RL = 150 DC coupled DG
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Diff Gain (%) and Diff Phase ()
Input Voltage (V)
Diff Gain (%) and Diff Phase ()
DP
Input Voltage (V)
Rev 1B
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
11
Data Sheet
Application Information
Basic Operation Figures 1 and 2 illustrate typical circuit configurations for non-inverting, inverting, and unity gain topologies for dual supply applications. They show the recommended bypass capacitor values and overall closed loop gain equations.
+Vs 6.8F
perature, the package thermal resistance value ThetaJA (JA) is used along with the total die power dissipation. TJunction = TAmbient + (JA x PD) Where TAmbient is the temperature of the working environment. In order to determine PD, the power dissipated in the load needs to be subtracted from the total power delivered by the supplies. PD = Psupply - Pload Supply power is calculated by the standard power equation.
Output
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Input
+ -
0.1F
Psupply = Vsupply x IRMS supply Vsupply = VS+ - VSPower delivered to a purely resistive load is: Pload = ((VLOAD)RMS2)/Rloadeff The effective load resistor (Rloadeff) will need to include the effect of the feedback network. For instance, Rloadeff in figure 3 would be calculated as:
0.1F Rg -Vs 6.8F
RL Rf
G = 1 + (Rf/Rg)
Figure 1. Typical Non-Inverting Gain Circuit
+Vs 6.8F
RL || (Rf + Rg) These measurements are basic and are relatively easy to perform with standard lab equipment. For design purposes however, prior knowledge of actual signal levels and load impedance is needed to determine the dissipated power. Here, PD can be found from PD = PQuiescent + PDynamic - PLoad
G = - (Rf/Rg) For optimum input offset voltage set R1 = Rf || Rg
R1 Input Rg
+ -
0.1F Output 0.1F 6.8F -Vs RL Rf
Figure 2. Typical Inverting Gain Circuit
Quiescent power can be derived from the specified IS values along with known supply voltage, VSupply. Load power can be calculated as above with the desired signal amplitudes using: (VLOAD)RMS = VPEAK / 2 ( ILOAD)RMS = ( VLOAD)RMS / Rloadeff The dynamic power is focused primarily within the output stage driving the load. This value can be calculated as: PDYNAMIC = (VS+ - VLOAD)RMS x ( ILOAD)RMS Assuming the load is referenced in the middle of the power rails or Vsupply/2. Figure 3 shows the maximum safe power dissipation in the package vs. the ambient temperature for the packages available.
Rev 1B
Power Dissipation Power dissipation should not be a factor when operating under the stated 1000 ohm load condition. However, applications with low impedance, DC coupled loads should be analyzed to ensure that maximum allowed junction temperature is not exceeded. Guidelines listed below can be used to verify that the particular application will not cause the device to operate beyond it's intended operating range. Maximum power levels are set by the absolute maximum junction rating of 150C. To calculate the junction tem-
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
12
Data Sheet
2.5
reducing RS will increase bandwidth at the expense of additional overshoot and ringing.
SOIC-8
Maximum Power Dissipation (W)
2
Overdrive Recovery An overdrive condition is defined as the point when either one of the inputs or the output exceed their specified voltage range. Overdrive recovery is the time needed for the amplifier to return to its normal or linear operating point. The recovery time varies, based on whether the input or output is overdriven and by how much the range is exceeded. The CLC1006 will typically recover in less than 25ns from an overdrive condition. Figure 5 shows the CLC1006 in an overdriven condition.
3 5 4 3 Input 2 1 0 -1 -2 Output 0 -1 -2 -3 -4 -3 0 20 40 60 80 100 120 140 160 180 200 -5
1.5
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
1
0.5
SOT23-5
0 -40 -20 0 20 40 60 80
Ambient Temperature (C)
Figure 3. Maximum Power Derating Driving Capacitive Loads Increased phase delay at the output due to capacitive loading can cause ringing, peaking in the frequency response, and possible unstable behavior. Use a series resistance, RS, between the amplifier and the load to help improve stability and settling performance. Refer to Figure 4.
Input + Rf Rg Rs CL RL
VIN = 2.5Vpp G=5
2 1
Output Voltage (V)
Output
Input Voltage (V)
Time (ns)
Figure 5. Overdrive Recovery Figure 4. Addition of RS for Driving Capacitive Loads Layout Considerations General layout and supply bypassing play major roles in high frequency performance. CaDeKa has evaluation boards to use as a guide for high frequency layout and as aid in device testing and characterization. Follow the steps below as a basis for high frequency layout: * Include 6.8F and 0.1F ceramic capacitors for power supply decoupling * Place the 6.8F capacitor within 0.75 inches of the power pin * Place the 0.1F capacitor within 0.1 inches of the power pin * Remove the ground plane under and around the part, especially near the input and output pins to reduce parasitic capacitance * Minimize all trace lengths to reduce series inductances Refer to the evaluation board layouts below for more information.
www.cadeka.com
Table 1 provides the recommended RS for various capacitive loads. The recommended RS values result in <=1dB peaking in the frequency response. The Frequency Response vs. CL plots, on page 7, illustrates the response of the CLC1006.
CL (pF) 20 50 100 500 1000 RS () 20 15 11 6 3.3 -3dB BW (MHz) 300 210 150 68 55
Rev 1B
Table 1: Recommended RS vs. CL For a given load capacitance, adjust RS to optimize the tradeoff between settling time and bandwidth. In general,
(c)2007-2008 CADEKA Microcircuits LLC
13
Data Sheet
Evaluation Board Information The following evaluation boards are available to aid in the testing and layout of these devices: Evaluation Board # CEB002 CEB003 Products CLC1006IST5X CLC1006ISO8X
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Evaluation Board Schematics Evaluation board schematics and layouts are shown in Figures 9-11. These evaluation boards are built for dual- supply operation. Follow these steps to use the board in a single-supply application: 1. Short -Vs to ground. 2. Use C3 and C4, if the -VS pin of the amplifier is not directly connected to the ground plane.
Figure 10. CEB002 Top View
Figure 11. CEB002 Bottom View
Rev 1B
Figure 9. CEB002 Schematic
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
14
Data Sheet
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
Figure 14. CEB003 Bottom View
Figure 12. CEB003 Schematic
Rev 1B
Figure 13. CEB003 Top View
(c)2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
15
Data Sheet
Mechanical Dimensions
SOT23-5 Package
Comlinear CLC1006 Single, 500MHz Voltage Feedback Amplifier
SOIC-8 Package
Rev 1B
For additional information regarding our products, please visit CADEKA at: cadeka.com
CADEKA Headquarters Loveland, Colorado T: 970.663.5452 T: 877.663.5452 (toll free)
CADEKA, the CADEKA logo design, COMLINEAR, the COMLINEAR logo design, and ARCTIC, are trademarks or registered trademarks of CADEKA Microcircuits LLC. All other brand and product names may be trademarks of their respective companies. CADEKA reserves the right to make changes to any products and services herein at any time without notice. CADEKA does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by CADEKA; nor does the purchase, lease, or use of a product or service from CADEKA convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of CADEKA or of third parties. Copyright (c)2007-2008 by CADEKA Microcircuits LLC. All rights reserved.
A m p l i fy t h e H u m a n E x p e r i e n c e

▲Up To Search▲

Price & Availability of CLC1006

	To Download CLC1006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .