View LXMG1811-05-61S_4909260.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PanelMatchTM VEasyLITTM LXMG1811-05-6xS
TM (R)
5V 6W CCFL Programmable Inverter Module
PRODUCTION DATASHEET
DESCRIPTION
KEY FEATURES
WWW .Microsemi .C OM
The LXMG1811-05-6xS is a Single Output 6W CCFL (Cold Cathode Fluorescent Lamp) Inverter Module designed for the driving LCD backlight lamps for panels in the range of 3.9" to 15". Utilizing the full-bridge drive topology capabilities of the Microsemi's highly integrated LX6512 CCFL backlight controller the inverter allows a wider lamp output voltage range 280V to 730V compared to Microsemi's existing Direct DriveTM inverter solutions. Also this `S' version includes an additional input connector which links the inverter to a light sensor board (the LXMG1800_LS). So connected the inverter is capable of automatically adjusting (VEasyLITTM) the brightness of the LCD display to ambient lighting conditions.
Automatic brightness control can extend the life of the display and save power (particularly important for battery powered products). For applications needing full manual control of lamp brightness (dimming) we recommend the LXMG1811-05-6x (non-S), which does not offer the light sensor input. The maximum output current of the inverter is externally programmable over a range of 4mA to 7mA in 1mA steps to allow the inverter to properly match (PanelMatchTM) to a wide array of LCD panel lamp current specifications. For higher input voltage requirements the LXMG1813-12-6x or -6xS will work from a 9V to 16V input supply. Other benefits of the inverter's topology include stable fixed-frequency operation, secondary-side strike voltage regulation and both open/shorted lamp protection with fault timeout.
Automatic Lamp Dimming Using External LXMG1800_LS Light Sensor Board Assembly Externally Programmable Maximum Output Current Wide Lamp Voltage Range Fixed Frequency Operation Output Short-Circuit Protection and Automatic Strike-Voltage Regulation and Timeout RangeMAX Wide Range Dimming (50:1+) Rated From -30C to 80C UL60950 Pending RoHS Compliant
APPLICATIONS
Medical Instrument Displays Portable Instrumentation Desktop Displays Industrial Display Controls
BENEFITS
Smooth, Flicker Free Full-Range Brightness Control Programmable Output Current Allows Inverter to Mate with a Wide Variety of LCD Panel's Specifications
IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com
Protected by U.S. Patents: 5,923, 129; 5,930,121; 6,198,234; Patents Pending
PRODUCT HIGHLIGHT
VEASYLITTM AUTOMATIC BRIGHTNESS INPUT USING LXMG1800_LS AMBIENT LIGHT SENSOR ASSEMBLY
2
3
LXMG1811-05-6XS LXMG1811-05-6XS
SELECTABLE MAXIMUM OUPUT CURRENT 4MARMS TO 7MARMS
PACKAGE ORDER INFO
PART NUMBER
LXMG1811-05-61S LXMG1811-05-62S
OUTPUT CONNECTOR
JST SM02(8.0)B-BHS-1-TB(LF)(SN), Yeon Ho 20015WR-05A00 or equivalent JST SM02B-BHSS-1-TB(LF)(SN), Yeon Ho 35001WR-02A00 or equivalent
INVERTER MATES DIRECTLY TO PANEL CONNECTORS
JST BHR-03VS-1 JST BHSR-02VS-1
Copyright (c) 2008 Rev 1.0, 2008-11-14
Microsemi
Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
1
Page 1
PanelMatchTM VEasyLITTM LXMG1811-05-6xS
TM (R)
5V 6W CCFL Programmable Inverter Module
PRODUCTION DATASHEET
ABSOLUTE MAXIMUM RATINGS Input Signal Voltage (VIN) ........................................................................................................................................-0.3V to 6V Input Power ......................................................................................................................................................................... 8W Output Voltage, no load ............................................................................................................................................ 1800VRMS Output Current ............................................................................................................................................................. 8mARMS Output Power ...................................................................................................................................................................... 6W Input Signal Voltage ( SLEEP Input) ...................................................................................................................... -0.3V to VIN Input Signal Voltage (ALS_IN) .............................................................................................................................-0.3V to 5.5V Analog Output (ALS_VCC external load current) ............................................................................................................. -5mA Ambient Operating Temperature, zero airflow.....................................................................................................-30C to 80C Storage Temperature Range...............................................................................................................................-40C to 85C
Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out of specified terminal.
WWW .Microsemi .C OM
RECOMMENDED OPERATING CONDITIONS (R.C.) This module has been designed to operate over a wide range of input and output conditions. However, best efficiency and performance will be obtained if the module is operated under the condition listed in the `R.C.' column. Min. and Max. columns indicate values beyond which the inverter, although operational, may not function optimally. Parameter
Input Supply Voltage Range (Fully Regulated Lamp Current) Input Supply Voltage Range (Functional) Output Power Lamp Operating Voltage Lamp Current (Full Brightness) Operating Ambient Temperature Range
Symbol
VIN PO VLAMP IO(LAMP) TA
Recommended Operating Conditions Min R.C. Max
4.75 4.5
280 4.0 -30
Units
V W VRMS mARMS C
5.0 5.0
4.2 500
5.25 5.5
6.0 730 7.0 80
ELECTRICAL CHARACTERISTICS The following specifications apply over the recommended operating condition and ambient temperature of 0C to 60C except where otherwise noted; ALS_IN 2.75V, SLEEP 2.1V, VIN = 5V. Parameter
OUTPUT PIN CHARACTERISTICS Full Lamp Current Full Lamp Current Full Lamp Current Full Lamp Current Full Lamp Current Min. Average Lamp Current Lamp Start Voltage Operating Frequency Burst Frequency IL(MAX) IL(MAX) IL(MAX) IL(MAX) IL(MAX) IL(MIN) VLS fO fBURST Output Burst Frequency SET1 = Ground, SET2 = Ground SET1 = Ground, SET2 = Open SET1 = Open, SET2 = Ground SET1 = Open, SET2 = Open VIN = 4.5 to 5.5V; SET1 = Open, SET2 = Ground ALS_IN 0.9V, SET1 = SET2 = Ground, VBRT_ADJ floating; IL(MIN) = IL* (Min Duty Ratio) -30C < TA < 80C, VIN 4.5V 1400 47.7 173 3.5 4.5 5.4 6.3 5.3 4.0 5.0 6.0 7.0 6.0 1.0 1650 53 206 58.3 239 4.5 5.5 6.6 7.7 6.7 mARMS mARMS mARMS mARMS mARMS mARMS VRMS kHz Hz
Symbol
Test Conditions
LXMG1811-05-6xS Min Typ Max
Units
ELECTRICALS ELECTRICALS
Copyright (c) 2008 Rev 1.0, 2008-11-14
Microsemi
Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 2
PanelMatchTM VEasyLITTM LXMG1811-05-6xS
TM (R)
5V 6W CCFL Programmable Inverter Module
PRODUCTION DATASHEET
ELECTRICAL CHARACTERISTICS (CONTINUED)
WWW .Microsemi .C OM
The following specifications apply over the recommended operating condition and ambient temperature of 0C to 60C except where otherwise noted; ALS_IN 2.75V, SLEEP 2.1V, VIN = 5V. Parameter
BRITE INPUT Potentiometer Max Impedance Potentiometer Min Impedance SLEEP BAR INPUT RUN Mode SLEEP Mode SET1,2 INPUT SET1,2 Low Threshold Input Current ALS (AMBIENT LIGHT SENSOR) ALS_VCC POWER CHARACTERISTICS Sleep Current Run Current Strike (Open Lamp) Supply Current under Fault condition Typical Efficiency IIN(MIN) IRUN TS_DWELL IFAULT Fault condition SET1 = Open SET2 = Ground, VLAMP = 500VRMS 75 ALSVCC ILOAD = 3mA 4.5 10 750 1.0 5.5 20 2.0 V A mA Sec mA % VL ISET VSETx = 0V 0 -400 V A BRTPOT Full Lamp Current Minimum Lamp Current 2.1 0 400 500 k k VIN 0.8 V V
Symbol
Test Conditions
LXMG1811-05-6xS Min Typ Max
Units
0
VSLEEP VSLEEP
SLEEP 0.8V
SET1 = Open SET2 = Ground, VLAMP = 500VRMS
1.4
5 80
FUNCTIONAL PIN DESCRIPTION
CONN PIN DESCRIPTION
CN1 (Molex 53261-0871 or equivalent) mates with 51021-0800 housing, 50079-8100 pins. Mates with LX9501G input cable assembly CN1-1 CN1-2 CN1-3 CN1-4 CN1-5 CN1-6 CN1-7 CN1-8 GND Power Supply Return ON/OFF Control. (0V VIN
Main Input Power Supply 4.75V < VIN < 5.25V (Functional 4.5V to 5.5V)
SLEEP
BRITE SET1 SET2
SLEEP 0.8V = OFF, SLEEP 2.1V = ON
Can be left open or connected to a 500k potentiometer to reduce brightness when the LX1800_LS is connected. It is not recommended as brightness control voltage input. SET1 MSB Connecting this pin to ground decreases the output current (see Table 1) SET2 LSB Connecting this pin to ground decreases the output current (see Table 1)
ELECTRICALS ELECTRICALS
CN2 (Molex 53261-0371 or equivalent) mates with 51021-0800 housing, 50079-8100 pins. Mates with LXMG1800_LS ALS Assembly CN2-1 CN2-2 CN2-3 Copyright (c) 2008 Rev 1.0, 2008-11-14 ALS_VCC ALS_IN ASL_GND Nominal 5V Supply for ALS Board Assembly. 3mA maximum output load Brightness Control Voltage input from light sensor board. ALS Board Power Supply Return.
Microsemi
Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 3
PanelMatchTM VEasyLITTM LXMG1811-05-6xS
TM (R)
5V 6W CCFL Programmable Inverter Module
PRODUCTION DATASHEET
FUNCTIONAL PIN DESCRIPTION
WWW .Microsemi .C OM
CONN
PIN
DESCRIPTION
CN3 for LXMG1811-05-61S and -62S (JST SM02(8.0)B-BHS-1-TB(LF)(SN) ; Yeon Ho 20015WR-05A00, SM02B-BHSS-1-TB(LF)(SN) ; Yeon Ho 35001WR-02A00) or equivalent CN3-1 CN3-2 VHI VLO High voltage connection to high side of lamp. Connect to lamp terminal with shortest lead length. DO NOT connect to Ground. Connection to low side of lamp. Connect to lamp terminal with longer lead length. DO NOT connect to Ground
TABLE 1 OUTPUT CURRENT SETTINGS SET1 (Pin 7) Open* Open* Ground Ground SET2 (Pin 8) Open* Ground Open* Ground Nominal Output Current 7.0mA 6.0mA 5.0mA 4.0mA
* If driven by a logic signal it should be open collector or open drain only, not a voltage source.
PHYSICAL DIMENSIONS LXMG1811-05-6xS
110mm 93.5mm
3.68in. 4.33in. MOUNTING HOLE 3.18MM .08 DIA.
CN1
CN2 16mm
0.63in. 9mm 0.2
0.354in.
12.5mm
0.492in
CN2 CN3
3.5mm
0.138in.
74mm 0.2mm
19.5mm
0.768in.
GROUNDED MOUNTING HOLE 3.18MM .08 DIA.
2.91in
Warning High Voltage is present at high side of transformer, its core and the high side of the output connector, please provide at least 3 mm clearance (in all directions) on the component side of the board to any conductor when mounting
6.0mm Max
0.236in.
1.0mm 0.1
0.0394in.
R1.0
PCB tolerances 0.5mm , M3 recommended mounting screws
All dimensions are in millimeters, inches are for reference only
Weight: (9g) typ.
PACKAGE DATA PACKAGE DATA
Copyright (c) 2008 Rev 1.0, 2008-11-14
Microsemi
Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 4
PanelMatchTM VEasyLITTM LXMG1811-05-6xS
TM (R)
5V 6W CCFL Programmable Inverter Module
PRODUCTION DATASHEET
SIMPLIFIED BLOCK DIAGRAM
WWW .Microsemi .C OM
VIN ALS_VCC 5V
ALS_IN
+4.2V
43.2k 20k
BRITE
0.1F
LAMP HI
2.2F
Control Circuitry
VIN
SLEEP
+4.2V 10k SET1 LAMP
+4.2V 10k
OVSENSE ISENSE LAMP LO
SET2
VeasyLITTM LXMG1800_LS APPLICATION
Key LXMG1800_LS Features
Small Size 9.5 x 31 x 2.5 mm Flush Mount on Sensor Side Board is Powered by Inverter User Customizable Light Gain Human Eye Light Response Flexible Mounting Location Light Sensor board should be mounted on the same plane with LCD panel for best results
B D BLOCK DIAGRAM
LXMG1800_LS
Copyright (c) 2008 Rev 1.0, 2008-11-14
Microsemi
Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 5
PanelMatchTM VEasyLITTM LXMG1811-05-6xS
TM (R)
5V 6W CCFL Programmable Inverter Module
PRODUCTION DATASHEET
TYPICAL APPLICATION
WWW .Microsemi .C OM
5V VIN VHI
BRITE 500k
LXMG1811-05-6xS
CCFL TUBE
It is recommended to use LXMG1811-05-6xS only with the LXMG1800_LS external light sensor assembly. A 500k potentiometer may be added to the inverter's BRITE input pin to allow a degree of manual override to the light sensor. Adjustment of the potentiometer will only dim the display further; it cannot increase the maximum brightness level set by the light sensor. If full manual control of dimming is required by the application we recommend the use of the LXMG1811-05-6x (non-S) version. If you need to turn the inverter ON/OFF remotely, connect to TTL logic signal to the SLEEP input. Connect VHI to high voltage wire from the lamp. Connect VLO to the low voltage wire (wire with thinner insulation). Never connect VLO to circuit ground as this will defeat lamp current regulation. If both lamp wires have heavy high voltage insulation, connect the longest wire to VLO. This wire is typically white. Use the SET1 and SET2 (see Figure 2) inputs to select the desired maximum output current. Using these two pins in combination allows the inverter to match a wide variety of panels from different manufacturers. Generally the best lamp lifetime correlates with driving the CCFL at the manufacture's nominal current setting. However the SET1 and SET2 inputs allow the user the flexibility to adjust the current to the maximum allowable output current to increase panel brightness at the expense of some reduced lamp life.
SLEEP SET1 NC SET2 NC GND VLO
Figure 1 - Brightness Control (Output current set to maximum)
5V BRITE VIN VHI CCFL TUBE VLO
LXMG1811-05-6xS SLEEP SET1 SET2 GND
L 4.0mARMS H 5.0mARMS L 6.0mARMS H 7.0mARMS L=GND; H=Open Figure 2 - Max Output Current (SET1 and SET2 Inputs)
L L H H
Although the SET pins are designed such that just leaving them open or grounding them is all that is needed to set the output current, they can also be actively set. Using an open collector or open drain logic signal will allow you to reduce the lamp current for situations where greater dim range is required. Since the dim ratio is a factor of both the burst duty cycle and the peak output current, using this technique the effective dim ratio can be increased greater than the burst duty cycle alone. Conversely, the SET inputs could be used to overdrive the lamp temporarily to facilitate faster lamp warm up at initial lamp turn on. Of course any possible degradation on lamp life from such practices is the user's responsibility since not all lamps are designed to be overdriven. The inverter has a built-in fault timeout function. If the output is open (lamp disconnected or broken) or shorted the inverter will attempt to strike the lamp up to about two seconds, after which (without success) the inverter will shutdown. In this mode the inverter will draw about 5mA from VIN. In order to restart the inverter it is necessary to toggle the sleep input or cycle the VIN input supply.
APPLICATION APPLICATION
Copyright (c) 2008 Rev 1.0, 2008-11-14
Microsemi
Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 6
PanelMatchTM VEasyLITTM LXMG1811-05-6xS
TM (R)
5V 6W CCFL Programmable Inverter Module
PRODUCTION DATASHEET
NOTES
WWW .Microsemi .C OM
NOTES NOTES
PRODUCTION DATA - Information contained in this document is proprietary to Microsemi and is current as of publication date. This document may not be modified in any way without the express written consent of Microsemi. Product processing does not necessarily include testing of all parameters. Microsemi reserves the right to change the configuration and performance of the product and to discontinue product at any time
Copyright (c) 2008 Rev 1.0, 2008-11-14
Microsemi
Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 7

▲Up To Search▲

Price & Availability of LXMG1811-05-61S

	To Download LXMG1811-05-61S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .