 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED ARRAY Pb Lead-Free Parts LA140B-3/G-2R DATA SHEET DOC. NO : REV. DATE : : QW0905-LA140B-3/G-2R A 30 - May - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA140B-3/G-2R Page 1/5 Package Dimensions 4.6 2.2O 0.5 6.5 7.4 2.9 2.4O 0.5 3.5~4.0 0.5 TYP 2.54TYP 4.75O 0.5 + 1 - 2 LG2640-1 2.9 3.1 3.3 4.3 1.5 MAX 25.0MIN 0.5 TYP 1.0MIN 2.54TYP +- Note : 1.All dimension are in millimeter tolerance is O 0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 1/4 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA140B-3/G-2R Page 2/5 Absolute Maximum Ratings at Ta=25 J Ratings Parameter Symbol G Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Operating Temperature Storage Temperature Soldering Temperature IF IFP PD Ir Topr Tstg Tsol 30 120 100 10 -40 ~ +85 -40 ~ +100 Max 260J for 5 sec Max (2mm from body) mA mA mW UNIT g A J J Typical Electrical & Optical Characteristics (Ta=25 J ) PART NO MATERIAL Emitted COLOR Lens Green Diffused Forward Peak Spectral voltage wave halfwidth @20mA(V) length f nm f Pnm Luminous intensity @10mA(mcd) Viewing angle 2c 1/2 (deg) Min. Max. Min. 565 30 1.7 2.6 12 Typ. 20 50 LA140B-3/G-2R GaP Green Note : 1.The forward voltage data did not including O 0.1V testing tolerance. 2. The luminous intensity data did not including O 15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA140B-3/G-2R Page 3/5 Typical Electro-Optical Characteristics Curve G CHIP Fig.1 Forward current vs. Forward Voltage 1000 Fig.2 Relative Intensity vs. Forward Current 3.5 Forward Current(mA) 100 10 1.0 0.1 1.0 2.0 3.0 4.0 5.0 Relative Intensity Normalize @20mA 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Forward Voltage@20mA Normalize @25J Relative Intensity@20mA Normalize @25J Ambient Temperature(J ) Ambient Temperature(J ) Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA 1.0 0.5 0.0 500 550 600 650 Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA140B-3/G-2R Page 4/5 Wave soldering Profile Temp(XC) 245 C 5sec Max 245X 5 /sec max 3 /sec max Preheat Soldering Soldering Iron:30W Max Temperature 300 C Max Soldering Time:3 Seconds Max Distance:2mm Min(From solder joint to case) 120X 25X Dip Soldering Preheat: 120 C Max Time(sec) Preheat time: 120 seconds Max Ramp-up 3 C/sec(max) Ramp-Down:-5 C/sec(max) Solder Bath:245 C Max Dipping Time:5 seconds Max Distance:2mm Min(From solder joint to case) Wave Soldering Profile (Pb Free) Temp(XC) 265 C 5sec Max 265X Soldering Soldering Iron:30W Max Temperature:350 CMax Soldering Time:3seconds Max Distance:2mm Min(From solder joint to case) 140X 3 /sec max Preheat 120 Seconds Max 5 /sec max 25X Dip Soldering Preheat: 140 C Max Preheat time: 120seconds Max Time(sec) Ramp-up 3 C/sec(max) Ramp-Down:-5 C/sec(max) Solder Bath:265 C Max Dipping Time:5 seconds Max Distance:2mm Min(From solder joint to case) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA140B-3/G-2R Page 5/5 Reliability Test: Test Item Test Condition 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Description This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. Reference Standard MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Operating Life Test High Temperature Storage Test 1.Ta=105 JO 5J 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 JO 5J 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. JIS C 7021: B-12 High Temperature High Humidity Test 1.Ta=65 JO 5J 2.RH=90 %~95% 3.t=240hrs O 2hrs The purpose of this test is the resistance of the device under tropical for hous. MIL-STD-202:103B JIS C 7021: B-11 Thermal Shock Test 1.Ta=105 JO 5J &-40JO (10min) (10min) 2.total 10 cycles 5J The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. This test intended to see soldering well performed or not. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 J O 5J 2.Dwell time= 10 O 1sec. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Solderability Test 1.T.Sol=230 J O 5J 2.Dwell time=5 O 1sec |
Price & Availability of LA140B-3-G-2R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |