View HR86835C_4939460.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HR868.35C
868.35Hz One-Port SAW Resonator For Wireless Remote Control
Approved by: Checked by: Issued by:
SPECIFICATION
PRODUCT: MODEL: SAW RESONATOR HR868.35C DCC6C
HOPE MICROELECTRONICS CO.,LIMITED
Tel:+86-755-82973806 Fax:+86-755-82973550
E-mail: sales@hoperf.com
Page 1 of 1
http://www.hoperf.com
SAW Resonator
HR868.35C
The HR868.35C is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount ceramic DCC6C case. It provides reliable, fundamental-mode, quartz frequency stabilization i.e. in transmitters or local oscillators operating at 868.350 MHz. 1.Package Dimension (DCC6C)
Pin 2 5 1,3,4,6 Sign A B C D Data (unit: mm) 0.6 1.5 1.5 1.8 Sign E F G Configuration Input / Output Output / Input Ground Data (unit: mm) 1.1 3.0 3.0
2.Marking
3.Equivalent LC Model and Test Circuit
HR868.35C
Laser Marking 4.Typical Application Circuits 1) Low-Power Transmitter Application
2) Local Oscillator Application
5.Typical Frequency Response
6.Temperature Characteristics
Tel:+86-755-82973806 Fax:+86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com
SAW Resonator
7.Performance 7-1.Maximum Ratings
Rating
CW RF Power Dissipation DC Voltage Between Terminals Storage Temperature Range Operating Temperature Range P VDC Tstg TA
HR868.35C
Value
0 30 -40 to +85 -10 to +60
Unit
dBm V
7-2.Electronic Characteristics
Characteristic
Center Frequency (+25 ) Insertion Loss Unloaded Q Quality Factor 50 Loaded Q Turnover Temperature Temperature Stability Turnover Frequency Frequency Temperature Coefficient Frequency Aging Absolute Value during the First Year Absolute Frequency Tolerance from 868.350 MHz
Sym
fC fC IL QU QL T0 f0 FTC |fA|
Minimum
868.200
Typical
Maximum
868.500
Unit
MHz kHz
150 1.5 9,400 1,500 25 fC 0.032 10 1.0 55 2.2
dB
kHz ppm/
2
ppm/yr M
DC Insulation Resistance Between Any Two Terminals Motional Resistance RF Equivalent RLC Model Motional Inductance Motional Capacitance Shunt Static Capacitance RM LM CM C0
19 32.7328 1.0273 2.1 2.4
29
H fF
2.7
pF
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
C 2003. All Rights Reserved.
The center frequency, fC, is measured at the minimum IL point with the resonator in the 50 test system. Unless noted otherwise, case temperature TC = +25C2C. Frequency aging is the change in fC with time and is specified at +65C or less. Aging may exceed the specification for prolonged temperatures above +65C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. 4. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f0. The nominal frequency at any case temperature, TC, may be calculated from: f = f0 [1 - FTC (T0 - TC)2]. 5. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance C0 is the measured static (nonmotional) capacitance between the two terminals. The measurement includes case parasitic capacitance. 6. Derived mathematically from one or more of the following directly measured parameters: fC, IL, 3 dB bandwidth, fC versus TC, and C0. 7. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 8. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. 9. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 10. For questions on technology, prices and delivery, please contact our sales offices or e-mail sales@hoperf.com. 1. 2. 3.
Tel:+86-755-82973806 Fax:+86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com

▲Up To Search▲

Price & Availability of HR86835C

	To Download HR86835C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .