View 1210B104XXX_4950388.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CERAMIC MULTILAYER CAPACITORS
PRODUCT CATALOG
QUALITY
DELIVERY
PERFORMANCE
SERVICE
INTRODUCTION
-----------------------------------------------------4 -----------------------------------------------6
TABLE OF CONTENTS
APPLICATION NOTES
DIELECTRIC CHARACTERISTICS-------------------------------------8
SMT-COG DIELECTRIC
--------------------------------------------10
SMT-X7R DIELECTRIC---------------------------------------------12
SMT-BX DIELECTRIC
----------------------------------------------14
SMT-Z5U-Y5V DIELECTRICS --------------------------------------16
HIGH RELIABILITY SMT CHIPS ------------------------------------18
THIN PROFILE CAPACITORS
--------------------------------------20
HIGH TEMPERATURE SMT ----------------------------------------22
RING DETECT CAPACITORS
--------------------------------------24 ------------------------------25
CERTIFIED SAFETY CAPACITORS
HIGH VOLTAGE MLC
-
COMMERCIAL-----------------------26
HIGH VOLTAGE MLC
-
HIGH RELIABILITY-----------------29
SPECIALTY MLC PRODUCTS ----------------------------32
CAPACITOR ARRAYS
-----------------------------------34
HIGH TEMPERATURE CAPACITORS --------------------36
RADIAL LEAD HV CAPACITORS-COMMERCIAL
--------38
RADIAL LEAD HV CAPACITORS-HIGH RELIABILITY-----40
"ST"
CAPACITOR ASSEMBLIES
-------------------------42 ------------------44
"SWITCH'M"
CAPACITOR ASSEMBLIES
CHIP MARKING SYSTEM
-----------------------------------46
TAPE
&
REEL SYSTEM
---------------------------------------47
NOV ACAP
THE PREMIER SOURCE FOR APPLICATION SPECIFIC MULTILAYER CAPACITORS
NOVACAP-SYFER combines the expertise of two companies, Novacap in the USA and Syfer Technology in the UK, with twenty and thirty years of history respectively, to provide high performance surface mount components, and the broadest range of application specific multilayer capacitors available in the world. With manufacturing facilities in America and Europe, Novacap-Syfer is globally situated to provide quick support and service to the customer. Our goal is to be the premier source for specialty multilayer capacitor products.
NOVACAP is a Dover company, with over ten sister companies servicing the electronics industry with equipment and
components throughout the world. NOVACAP operates from three modern manufacturing facilities occupying 93,000 square feet, located in Valencia, California. NOVACAP produces multilayer capacitors, using advanced ceramic and electrode formulations, with thin, dense and precise dielectric layers to satisfy unique and difficult requirements with unsurpassed quality. Product offerings include surface mount capacitors from the miniature 0402 size chip to larger high voltage units, rated to 20kV, for both commercial and high reliability applications, to satisfy EIA and MIL STD specifications. Products include the entire range of popular chip sizes and dielectrics, and further specializes in Application Specific Products, which include High Temperature SMT Capacitors, Thin Profile, Ring Detect, Certified Lightning Strike Capacitors, Medical Grade Capacitor Arrays, Capacitor Assemblies for switch mode power supplies, and leaded capacitors in various styles.
SYFER TECHNOLOGY is a Novacap company, with an 80,000 square foot
plant located in Norwich, England, and is dedicated to the manufacture of multilayer ceramic components utilizing a state-of-the-art, fully integrated computer controlled "Wet Process" which provides products to the highest quality standards. Product offerings include surface mount MLCs, from 16V rating to 500V rating, High Voltage versions to 10KVdc, Stacked Assemblies for power supply applications, EMI Planar Arrays and Discoidals, EMI chips, EMI Feedthrough Filters, Leaded
Capacitors,Varistor Arrays, and a variety of Application Specific products custom designed for your needs.
4
NOVACAP QUALITY POLICY
Quality at NOVACAP is conformance to requirements in all our dealings with: Our Customers - Our Vendors - Our Employees The Environment. The system for quality is prevention of defects, and to attain continuous improvements in every activity. Every employee is committed to doing the job right, the first time.
NOVACAP maintains an ongoing education program for all of its
employees, to create quality awareness, develop communication skills, provide formal capacitor processing education, and to create problem solving teams.
TECHNICAL INFORMATION
NOVACAP provides Applications Notes in this catalog as a user's guide to chip selection and attachment methods. For more details on MLC products, please refer to the NOVACAP Technical Brochure, available on the NOVACAP website. The Technical Brochure describes capacitor applications, the nature of capacitance, dielectric properties and behavior, classes of dielectrics, ferroelectric behavior, electrical properties, test standards, high reliability testing, visual criteria and detailed user guidelines. Please do not hesitate to contact the factory for any product or technical assistance.
IMPORTANT NOTICE
NOVACAP reserves the right to make changes in product designs and/or pricing. Sales are subject to the terms and conditions as defined on NOVACAP invoice and packing slips. NOVACAP has no control on conditions of use; no warranties are made or implied as to suitability for the customer's intended use. NOVACAP shall in no event be responsible for incidental or consequential damages including, without limitation, to personal injury or property damage.
WEBSITE
The NOVACAP Website outlines the product offerings in catalog format. These catalogs are updated on a routine basis, and presented in pdf format for easy viewing and downloading. All capacitance values are shown as maximum values. Please refer to the Webpage whenever you need to update your data sheets. Web Page: www.novacap.com E-Mail: info@novacap.com
NOVACAP MAIN OFFICE 25136 Anza Drive,Valencia, CA 91355 Tel: (661) 295-5920 Fax: (661) 295-5928
This catalog outlines the products available from NOVACAP. To access SYFER TECHNOLOGY catalogs or obtain additional information please use the Syfer website at www.Syfer.com, or contact Syfer Sales directly by telephone: 44 1603 723310, fax: 44 1603 723301, or Email: sales@syfer.co.uk.
5
APPLICATION
NOTES
CHIP SELECTION
Multilayer capacitors (MLC) are categorized by dielectric performance with temperature, or "temperature coefficient", as these devices vary in behavior over temperature. The choice of component is thus largely determined by the temperature stability required of the device, i.e. type of dielectric, and the size necessary for a given capacitance and voltage rating. The following items are pertinent to chip selection:
DIELECTRIC TYPE
COG: Ultra stable Class I dielectric, with negligible dependence of electrical properties on temperature, voltage, frequency and time. Used in circuitry requiring very stable performance. X7R: Stable Class II dielectric, with predictable change in properties with temperature, voltage, frequency and time. Used as blocking, de-coupling, bypassing and frequency discriminating elements. This dielectric is ferroelectric, and provides higher capacitance than Class I Z5U/Y5V: General purpose Class III dielectrics with higher dielectric constant and greater variation of properties with temperature and test conditions. Very high capacitance per unit volume is attainable for general purpose applications where stability is not important. CAPACITOR SIZE Size selection is based primarily on capacitance value and voltage rating. Smaller units are generally less expensive; 0805 is the most economical size. Because mass affects the thermal shock behavior of chips, size selection must consider the soldering method used to attach the chip to the board. Sizes 1812 and smaller can be wave, vapor phase or reflow soldered. Larger units require reflow soldering. TERMINATION MATERIAL Nickel barrier termination, with exceptional solder leach resistance is recommended for all applications involving solder. Silver palladium termination is required for epoxy attachment, also for solder reflow below 230C . Silver termination, which is most ductile, yet leaches readily in solder, is often preferred for units to be leaded, to minimize thermal cycle stresses. PACKAGING Units are available in bulk, reeled or in waffle pack. Bar coding is optional.
ATTACHMENT METHODS
Bonding of capacitors to substrates can be categorized into two methods, those involving solder, which are prevalent, and those using other materials, such as epoxies and thermo-compression or ultrasonic bonding with wire. SOLDERING Soldering methods commonly used in the industry and recommended are Reflow Soldering, Wave Soldering, and to a lesser extent, Vapor Phase Soldering. All these methods involve thermal cycling of the components and therefore the rate of heating and cooling must be controlled to preclude thermal shocking of the devices. In general, rates which do not exceed 100C per minute and a T spike of 100C maximum for any soldering process is advisable. Other precautions include post soldering handling, primarily avoidance of rapid cooling with contact with heat sinks, such as conveyors or cleaning solutions. Large chips are more prone to thermal shock as their greater bulk will result in sharper thermal gradients within the device during thermal cycling. Units larger than 1812 experience excessive stress if processed through the fast cycles typical of solder wave or vapor phase operations. Solder reflow is most applicable to the larger chips as the rates of heating and cooling can be slowed within safe limits. Attachment using a soldering iron requires extra care, particularly with large components, as thermal gradients are not easily controlled and may cause cracking of the chip. Precautions include preheating of the assembly to within 100C of the solder flow temperature, the use of a fine tip iron which does not exceed 30 watts, and limitation of contact of the iron to the circuit pad areas only. BONDING Hybrid assembly using conductive epoxy or wire bonding requires the use of silver palladium or gold terminations. Nickel barrier termination is not practical in these applications, as an increase in ESR results. CLEANING Chip capacitors can withstand common agents such as water, alcohol and degreaser solvents used for cleaning boards. Ascertain that no flux residues are left on the chip surfaces as these diminish electrical performance.
6
BOARD DESIGN CONSIDERATIONS
The amount of solder applied to the chip capacitor will influence the reliability of the device. Excessive solder can create thermal and tensile stresses on the component which could lead to fracturing of the chip or the solder joint itself. Insufficient or uneven solder application can result in weak bonds, rotation of the device off line or lifting of one terminal off the pad (tombstoning). The volume of solder is process and board pad size dependent. WAVE SOLDERING exposes the devices to a large solder volume, hence the pad size area must be restricted to accept an amount of solder which is not detrimental to the chip size utilized. Typically the pad width is 66% of the component width, and the length is .030" (.760 mm) longer than the termination band on the chip. An 0805 chip which is .050" wide and has a .020" termination band therefore requires a pad .033" wide by .050" in length. Opposing pads should be identical in size to preclude uneven solder fillets and mismatched surface tension forces which can misalign the device. It is preferred that the pad layout results in alignment of the long axis of the chips at right angles to the solder wave, to promote even wetting of all terminals. Orientation of components in line with the board travel direction may require dual waves with solder turbulence to preclude cold solder joints on the trailing terminals of the devices, as these are blocked from full exposure to the solder by the body of the capacitor. Restrictions in chip alignment do not apply to SOLDER REFLOW or VAPOR PHASE processes, where the solder volume is controlled by the solder paste deposition on the circuit pads. Pads are designed to match or slightly exceed the width of the capacitor, with length .030" (.760 mm) greater than the chip terminal band width, to provide a wetting area for a full solder fillet.
NOVACAP SOLDER ATTACHMENT RECOMMENDED PROFILES
250
publishes
a
Technical Brochure which provides detailed information on the properties 225 200 175 150 125 100 75 50 20 40 60 80 100 120 140 160 180 200 of ceramic chip
capacitors, dielectric behavior, product classifications, test and quality standards, and other information relevant to their use. The NOVACAP Technical Brochure is available upon request. For quick reference see the Brochure on the NOVACAP Website at www.novacap.com.
TEMPERATURE C
SECONDS
SOLDER WAVE
VAPOR PHASE
SOLDER REFLOW
RECOMMENDATIONS Preheat/Cooling rates not to exceed 120C/minute. DT spikes to max temperature not to exceed 100C
7
DIELECTRIC CHARACTERISTICS
NOVACAP produces capacitors with dielectric characteristics COG (NPO), X7R, BX, Z5U and Y5V, per EIA RS 198, as outlined in the text and graphs following. High temperature versions of COG and X7R dielectrics are described in separate data sheets for those products. NOVACAP performs routine testing on production representative products, for all dielectric materials, as verification of conformance to the General Specifications. Following the guidelines of MIL-PRF-55681; periodic Group C inspections are performed on capacitor lots manufactured, with qualified materials, according to documented procedures. The inspection data is generated following Electrical, Mechanical and Environmental test methods and specifications of MIL-STD-202 and EIA-198. The data records are maintained and utilized as assurance of our capability to meet the stated performance requirements.
G E N E R A L S P E C I F I C AT I O N S - E N V I RO N M E N TA L
Thermal Shock: MIL-STD-202, Method 107, Condition A (125C) Immersion: MIL-STD-202, Method 104, Condition B Humidity Steady State (Low Voltage): MIL-STD-202, Method 103, Condition A 85C, 85% RH, DC bias 1.3 +/- 0.25 Vdc. MIL-STD-202, Method 108 Condition F (2,000 Hrs).
Life:
G E N E R A L S P E C I F I C AT I O N S - M E C H A N I C A L
Terminal Strength: MIL-STD-202, Method 211 Condition A. Force 4 lbs Min. Adhesion Solderability: MIL-STD-202, Method 208.
Resistance to Soldering Heat:
MIL-STD-202, Method 210, Test Condition B.
DIELECTRIC CHARACTERISTICS - COG
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
-55C to 125C 0 +/- 30 ppm/C .001 (0.1%) max @ 25C > 100G or >1000F > 10G or >100F < 200V, 250% 201-500V,150% or 500V* > 500V, 120%, or 750V* 0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C 1MHZ for Capacitance <100pF
C ppm
TEMPERATURE COEFFICIENT
UPPER LIMIT
50 25 0 -25 -50
-55 -25 0 25C 50 75 100 125
TYPICAL LOWER LIMIT
AGING RATE: TEST PARAMETERS:
8
DIELECTRIC CHARACTERISTICS - X7R/BX
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: TEMP-VOLTAGE COEFFICIENT (BX): DISSIPATION FACTOR: -55C to 125C +/-15% C Max. +15% -25% C Max. 2.5% max @ >25V rating 3.5% max @ <25V rating INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
% CAPACITANCE CHANGE
%C 20 15 10 5 0 -5 -10 -15 -20 -55
TEMPERATURE COEFFICIENT
UPPER LIMIT
TYPICAL
> 100G or >1000F > 10G or >100F < 200V, 250% 201-500V,150% or 500V* > 500V, 120%, or 750V* < 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C
LOWER LIMIT
AGING RATE: TEST PARAMETERS:
-35
-15
5
25
45
65
85
105
125
TEMPERATURE (C)
DIELECTRIC CHARACTERISTICS - Z5U
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR: INSULATION RESISTANCE, 25C DIELECTRIC WITHSTANDING VOLTAGE: + 10C to 85C
TEMPERATURE COEFFICIENT
%C % CAPACITANCE CHANGE 80 40 0
TYPICAL
+ 22%-56% C Max. 4.0% max @ 25C > 10G or >100F < 200V, 250% 250V, 150% ~ 2.0% per decade 1KHz, 0.5 +/- 0.2 VRMS, 25C
UPPER LIMIT
AGING RATE: TEST PARAMETERS:
-40
LOWER LIMIT
-80 -55 -25 0 25C 50 75 100 125 TEMPERATURE (C)
DIELECTRIC CHARACTERISTICS - Y5V
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR: -30C to 85C
%C % CAPACITANCE CHANGE 100 50
TEMPERATURE COEFFICIENT
+ 22%-82% C Max. 5.0% max @ >25V rating 7.0% max @ <25V rating
UPPER LIMIT
INSULATION RESISTANCE, 25C DIELECTRIC WITHSTANDING VOLTAGE:
> 10G or >100F < 200V, 250% 250V, 150%
0
TYPICAL
-50
LOWER LIMIT
AGING RATE: TEST PARAMETERS:
~ 2.0% per decade 1KHz, 0.5 +/- 0.2 VRMS, 25C
-100 -55 -25 0 25C 50 75 100 125 TEMPERATURE (C)
9
SMT-COG DIELECTRIC
Ultra stable Class I dielectric (EIA COG) or NPO: linear temperature coefficient, low loss, stable electrical properties with time, voltage and frequency. Designed for surface mount application with nickel barrier termination suitable for solder wave, vapor phase or reflow solder board attachment. Also available with silver-palladium terminations for hybrid use with conductive epoxy. COG chips are used in precision circuitry requiring Class I stability.
CAPACITANCE & VOLTAGE SELECTION FOR POPULAR CHIP SIZES 3 digit code: two significant digits, followed by number of zeros eg: 183 = 18,000 pF. R denotes decimal, eg. 2R7 = 2.7 pF
SIZE
Min Cap
0402 0R1 271 221 181 101 680 470 * * * * * * * * * *
0504 0R1 182 122 102 561 391 271 * * * * * * * * * *
0603 0R1 102 821 681 331 271 181 * * * * * * * * * *
0805 0R1 472 392 332 182 122 821 561 561 471 471 471 331 * * * *
1005 0R1 682 562 472 222 182 122 821 821 681 681 681 471 * * * * *
1206 0R5 153 123 103 562 392 272 182 152 102 102 102 821 561 271 * * *
1210 3R0 273 223 223 103 822 562 392 272 222 222 222 182 122 681 * * *
1808 100 333 273 223 123 103 682 472 332 272 222 182 152 122 821 331 181
1812 150 393 393 333 183 123 822 682 472 392 332 272 222 222 122 561 331
1825 390 823 823 823 563 393 273 183 123 123 103 822 822 682 392 182 102
2221 390 823 823 823 563 393 273 183 123 103 822 822 822 682 392 182 102
2225 390 104 104 104 683 473 333 223 153 153 123 103 103 822 472 222 122
16V 25V
V O LTA G E & CAP MAX
50V 100V 200V 250V 300V 400V 500V 600V 800V* 1000V* 1500V* 2000V* 3000V* 4000V*
*Units rated above 800V may require conformal coating in use to preclude arcing over the chip surface.
10
PRODUCT OFFERING
See chart for standard EIA case sizes and available capacitance and voltage ratings. Special sizes, thickness and other voltage ratings are available, see other NOVACAP product offerings. High reliability testing is available per MIL-PRF-55681, MIL-PRF-123, or to customer SCD. Please consult the factory with your requirements. NOVACAP has complete testing facilities at your disposal.
L
T
W
MB
DIMENSIONS +/- INCHES (MM)
SIZE
0402
0504
0603
0805
1005
1206
1210
1808
1812
1825
2221
2225
LENGTH L .040 (1.02) .050 (1.27) .060 (1.52) .080 (2.03) .100 (2.54) .125 (3.18) .125 (3.18) .180 (4.57) .180 (4.57) .180 (4.57) .220 (5.59) .220 (5.59) WIDTH W .020 (.508) .040 (1.02) .030 (.760) .050 (1.27) .050 (1.27) .060 (1.52) .100 (2.54) .080 (2.03) .125 (3.18) .250 (6.35) .210 (5.33) .250 (6.35) T MAX. .024 (.610) .044 (1.12) .035 (.889) .054 (1.37) .054 (1.37) .064 (1.63) .065 (1.65) .065 (1.65) .065 (1.65) .080 (2.03) .080 (2.03) .080 (2.03) MB
.010 (.254) .014 (.355) .014 (.355) .020 (.508) .020 (.508) .020 (.508) .020 (.508) .024 (.610) .024 (.610) .024 (.610) .030 (.760) .030 (.760)
TOLERANCES +/- INCHES (MM) LENGTH WIDTH MB
.004 (.102) .004 (.102) .006 (.152) .006 (.152) .006 (.152) .006 (.152) .006 (.152) .006 (.152) .006 (.152) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .012 (.305) .012 (.305) .012 (.305) .015 (.380) .015 (.380) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .015 (.380) .015 (.380) .015 (.380) .010 (.254) .010 (.254) .010 (.254) .010 (.254) .014 (.355) .014 (.355) .014 (.355) .015 (.380) .015 (.380)
HOW TO ORDER
1206
SIZE
See Chart
N
DIELECTRIC
N =COG
272
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 272 = 2700 pF
J
TOLERANCE
B = 0.10 pF
(0.1 to 10 pF)
101
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 101 = 100V
N
TERMINATION
N = Nickel Barrier P = Ag-Pd
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if Non EIA thickness is required.
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
C = 0.25 pF
(0.1 to 10 pF)
D = 0.50 pF
(0.1 to 20 pF)
F = +/- 1.0 % G = +/- 2.0 % H = +/- 3.0 % J = +/- 5.0 % K = +/- 10 % M = +/- 20 % Z = +80% -20% P = +100% -0%
11
SMT-X7R DIELECTRIC
Stable EIA Class II dielectric, with +/-15% temperature coefficient and predictable variation of electrical properties with time, temperature and voltage.These chips are designed for surface mount application with nickel barrier terminations suitable for solder wave, vapor phase or reflow solder board attachment. Also available in silver-palladium terminations for hybrid use with conductive epoxy. Class II X7R chips are used as decoupling, by-pass, filtering and transient voltage suppression elements.
CAPACITANCE & VOLTAGE SELECTION FOR POPULAR CHIP SIZES 3 digit code: two significant digits, followed by number of zeros eg: 473 = 47,000 pF
SIZE
Min Cap
0402 121 682 562 562 272 182 182 * * * * * * * * * *
0504 121 393 273 273 153 103 103 * * * * * * * * * *
0603 121 273 183 183 103 682 682 * * * * * * * * * *
0805 121 124 104 104 563 333 273 223 153 103 822 472 272 * * * *
1005 121 184 124 124 683 473 393 333 223 153 123 682 472 * * * * *
1206 121 334 274 224 124 823 563 563 473 273 223 123 682 222 102 * * *
1210 121 684 564 474 274 184 124 124 104 563 473 273 153 472 222 * * *
1808 121 824 684 564 334 224 154 124 124 563 563 333 183 562 272 821 391
1812 391 125 105 824 564 334 334 224 184 104 823 473 273 822 392 122 561
1825 821 185 185 155 155 105 564 564 474 274 224 154 823 273 153 472 222
2221 821 185 155 155 125 824 684 564 394 274 224 154 104 273 153 472 222
2225 821 225 185 185 155 105 105 684 564 334 274 184 124 333 183 562 272
16V 25V
V O LTA G E & CAP MAX
50V 100V 200V 250V 300V 400V 500V 600V 800V* 1000V* 1500V* 2000V* 3000V* 4000V*
*Units rated above 800V may require conformal coating in use to preclude arcing over the chip surface.
12
PRODUCT OFFERING
See chart for standard EIA case sizes and available capacitance and voltage ratings. Special sizes, thickness and other voltage ratings are available, see other NOVACAP product offerings. High reliability testing is available per MIL-PRF-55681, MIL-PRF-123, or to customer SCD. Please consult the factory with your requirements. NOVACAP has complete testing facilities at your disposal.
L
T
W
MB
DIMENSIONS +/- INCHES (MM)
SIZE
0402
0504
0603
0805
1005
1206
1210
1808
1812
1825
2221
2225
.050 (1.27) .060 (1.52) .080 (2.03) .100 (2.54) .125 (3.18) .125 (3.18) .180 (4.57) .180 (4.57) .180 (4.57) .220 (5.59) .220 (5.59) LENGTH L .040 (1.02) WIDTH W .020 (.508) .040 (1.02) .030 (.760) .050 (1.27) .050 (1.27) .060 (1.52) .100 (2.54) .080 (2.03) .125 (3.18) .250 (6.35) .210 (5.33) .250 (6.35) T MAX. .024 (.610) .044 (1.12) .035 (.889) .054 (1.37) .054 (1.37) .064 (1.63) .065 (1.65) .065 (1.65) .065 (1.65) .080 (2.03) .080 (2.03) .080 (2.03) MB .010 (.254) .014 (.355) .014 (.355) .020 (.508) .020 (.508) .020 (.508) .020 (.508) .024 (.610) .024 (.610) .024 (.610) .030 (.760) .030 (.760)
TOLERANCES +/- INCHES (MM) LENGTH WIDTH MB
.004 (.102) .004 (.102) .006 (.152) .006 (.152) .006 (.152) .008 (.203) .006 (.152) .006 (.152) .008 (.203) .006 (.152) .006 (.152) .010 (.254) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .010 (.254) .010 (.254) .008 (.203) .012 (.305) .012 (.305) .012 (.305) .015 (.380) .015 (.380) .008 (.203) .008 (.203) .008 (.203) .015 (.380) .015 (.380) .015 (.380) .010 (.254) .014 (.355) .014 (.355) .014 (.355) .015 (.380) .015 (.380)
HOW TO ORDER
1206
SIZE
See Chart
B
DIELECTRIC
B = X7R
104
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 104=100,000pF
J
TOLERANCE
J = +/- 5.0% K = +/- 10 % M = +/- 20 % Z = +80%-20% P = +100%-0%
250
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 250=25V
N
TERMINATION
N=Nickel Barrier P=Ag-Pd
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if Non EIA thickness is required.
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
13
SMT
-
BX DIELECTRIC
BX characteristics are identical to X7R dielectric, with the added restriction that the Temperature-Voltage Coefficient (TVC) is not to exceed -25% C at rated voltage, over the operating temperature range (-55C to 125C). NOVACAP manufactures chips using dielectrics with minimal voltage coefficient and layer thickness design to meet BX requirements. BX dielectric code is X.
CAPACITANCE & VOLTAGE SELECTION FOR POPULAR CHIP SIZES 3 digit code: two significant digits, followed by number of zeros eg: 473 = 47,000 pF
SIZE
Min Cap M A X C A P & V O LT A G E
0402 121 682 562 222 471 151 121 * * *
0504 121 393 273 123 472 122 681 * * *
0603 121 273 183 822 272 681 331 * * *
0805 121 124 104 393 123 272 222 152 681 561
1005 121 184 124 563 183 392 332 222 102 102
1206 121 334 274 124 393 681 682 392 182 182
1210 121 684 564 224 683 183 123 103 472 392
1808 221 824 684 274 823 183 153 103 562 392
1812 471 125 105 474 124 333 273 183 103 682
1825 821 185 185 125 334 823 683 473 273 183
2221 821 185 185 125 334 823 683 473 273 183
2225 821 225 185 155 394 104 823 563 273 223
16V 25V 50V 100V 200V 250V 300V 400V 500V
14
PRODUCT OFFERING
See chart for standard EIA case sizes and available capacitance and voltage ratings. Special sizes, thickness and other voltage ratings are available, see other NOVACAP product offerings. High reliability testing is available per MIL-PRF-55681, MIL-PRF-123, or to customer SCD. Please consult the factory with your requirements. NOVACAP has complete testing facilities at your disposal.
L
T
W
MB
DIMENSIONS +/- INCHES (MM)
SIZE
0402
0504
0603
0805
1005
1206
1210
1808
1812
1825
2221
2225
.050 (1.27) .060 (1.52) .080 (2.03) .100 (2.54) .125 (3.18) .125 (3.18) 180 (4.57) .180 (4.57) .180 (4.57) .220 (5.59) .220 (5.59) LENGTH L .040 (1.02) WIDTH W .020 (.508) .040 (1.02) .030 (.760) .050 (1.27) .050 (1.27) .060 (1.52) .100 (2.54) .080 (2.03) .250 (6.35) .250 (6.35) .210 (5.33) .250 (6.35) T MAX. .024 (.610) .044 (1.12) .035 (.889) .054 (1.37) .054 (1.37) .064 (1.63) .065 (1.65) .065 (1.65) .080 (2.03) .080 (2.03) .080 (2.03) .080 (2.03) MB .010 (.254) .014 (.355) .014 (.355) .020 (.508) .020 (.508) .020 (.508) .020 (.508) .024 (.610) .024 (.610) .024 (.610) .030 (.760) .030 (.760)
TOLERANCES +/- INCHES (MM) LENGTH WIDTH MB
.004 (.102) .004 (.102) .006 (.152) .006 (.152) .006 (.152) .008 (.203) .006 (.152) .006 (.152) .008 (.203) .006 (.152) .006 (.152) .010 (.254) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .010 (.254) .010 (.254) .008 (.203) .012 (.305) .012 (.305) .012 (.305) .015 (.380) .015 (.380) .008 (.203) .008 (.203) .008 (.203) .015 (.380) .015 (.380) .015 (.380) .010 (.254) .014 (.355) .014 (.355) .014 (.355) .015 (.380) .015 (.380)
HOW TO ORDER
1206
SIZE
See Chart
X
DIELECTRIC
X = BX
104
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 104=100,000pF
J
TOLERANCE
J = +/- 5.0% K = +/- 10% M = +/- 20%
250
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 250=25V
N
TERMINATION
N=Nickel Barrier P=Ag-Pd
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if Non EIA thickness is required.
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
15
SMT-Z5U-Y5V DIELECTRICS
General purpose EIA Class III dielectrics with +22% to -56% (Z5U) and +22% -82% (Y5V) temperature coefficients and very high capacitance density. The NOVACAP Z5U and Y5V formulations are very stable with time, typically aging less than 2% per decade. General purpose chips are used in by-pass and decoupling functions and other applications where capacitance change over the operating temperature range is not critical.
CAPACITANCE & VOLTAGE SELECTION FOR POPULAR CHIP SIZES 3 digit code: two significant digits, followed by number of zeros eg: 473 = 47,000 pF
Z5U DIELECTRIC
SIZE
Min Cap MAX CAP & VOLTAGE
0402 121 333 273 183 472 152 102
0504 121 184 154 104 393 103 682
0603 121 154 104 683 273 562 472
0805 391 684 474 334 124 333 223
1005 561 824 684 474 184 393 333
1206 561 155 125 105 274 823 563
1210 561 335 225 185 564 184 124
1808 182 395 335 225 684 224 154
1812 272 565 475 395 125 394 224
1825 822 106 106 825 225 824 684
2221 822 156 126 106 335 125 824
2225 822 106 106 825 225 105 684
16V 25V 50V 100V 200V 250V
Y5V DIELECTRIC
SIZE
Min Cap MAX CAP & VOLTAGE
0402 121 393 333 223 562 182 122
0504 121 224 184 124 473 123 822
0603 121 184 124 823 333 682 562
0805 471 824 564 394 154 393 273
1005 681 105 824 564 224 473 393
1206 681 185 155 125 334 104 683
1210 681 395 275 225 684 224 154
1808 222 475 395 275 824 274 184
1812 332 685 565 475 155 474 274
1825 103 126 126 106 275 105 824
2221 103 126 126 106 275 125 824
2225 103 186 156 126 395 155 105
16V 25V 50V 100V 200V 250V
16
PRODUCT OFFERING
See chart for standard EIA case sizes and available capacitance and voltage ratings.The low aging rate of the Novacap dielectrics permits the manufacture of Z5U and Y5V chips with K (+/-10%) capacitance tolerance, as well as the M, Z and P tolerance offerings. Special sizes, thickness and other voltage ratings are available, see other NOVACAP product offerings. Please consult the factory with your requirements.
L
T
W
MB
DIMENSIONS +/- INCHES (MM)
SIZE
0402
0504
0603
0805
1005
1206
1210
1808
1812
1825
2221
2225
.050 (1.27) .060 (1.52) .080 (2.03) .100 (2.54) .125 (3.18) .125 (3.18) .180 (4.57) .180 (4.57) .180 (4.57) .220 (5.59) .220 (5.59) LENGTH L .040 (1.02) WIDTH W .020 (.508) .040 (1.02) .030 (.760) .050 (1.27) .050 (1.27) .060 (1.52) .100 (2.54) .080 (2.03) .125 (3.18) .250 (6.35) .210 (5.33) .250 (6.35) T MAX. .024 (.610) .044 (1.12) .035 (.889) .054 (1.37) .054 (1.37) .064 (1.63) .065 (1.65) .065 (1.65) .065 (1.65) .080 (2.03) .080 (2.03) .080 (2.03) MB .010 (.254) .014 (.355) .014 (.355) .020 (.508) .020 (.508) .020 (.508) .020 (.508) .024 (.610) .024 (.610) .024 (.610) .030 (.760) .030 (.760)
TOLERANCES +/- INCHES (MM) LENGTH WIDTH MB
.004 (.102) .004 (.102) .006 (.152) .006 (.152) .006 (.152) .008 (.203) .006 (.152) .006 (.152) .008 (.203) .006 (.152) .006 (.152) .010 (.254) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .010 (.254) .010 (.254) .008 (.203) .012 (.305) .012 (.305) .012 (.305) .015 (.380) .015 (.380) .008 (.203) .008 (.203) .008 (.203) .015 (.380) .015 (.380) .015 (.380) .010 (.254) .014 (.355) .014 (.355) .014 (.355) .015 (.380) .015 (.380)
HOW TO ORDER
1206
SIZE
See Chart
Y
DIELECTRIC
Z = Z5U Y = Y5V
104
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 104=100,000pF
M
TOLERANCE
K = +/- 10% M = +/- 20% Z = +80%-20% P = +100%-0%
250
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 250=25V
N
TERMINATION
N = Nickel Barrier 90/10 Sn/Pb
X
THICKNESS OPTION
T
PACKING OPTION
T = Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
X=Non standard thickness. Specify V = Non solderable in Mils if Non EIA Silver thickness is required.
17
HIGH RELIABILITY SMT CHIPS
NOVACAP manufactures and tests COG, BX and X7R chips in accordance with MIL-PRF-55681, MIL-PRF-123, MIL-PRF-49467, HALT, or customer SCD. Product is designed for optimum reliability, burned in at elevated voltage and temperature, and 100% physically and electrically inspected to ascertain conformance to strict performance criteria. Voltage ratings from 25 VDC to 500 VDC are available on standard EIA case sizes. Applications for High Reliability products include medical implanted devices, aerospace, airborne and various military applications, and consumer uses requiring safety margins not attainable with conventional product. High voltage conditioning up to 20 KV for specialty devices is also available, please refer to other NOVACAP product offerings.
CAPACITANCE SELECTION FOR FR-P
PARTS MEETING FR-R AND FR-S ARE ALSO AVAILABLE
3 digit code: two significant digits, followed by number of zeros eg: 183 = 18,000 pF
COG DIELECTRIC
SIZE
MAX CAP & VOLTAGE Min Cap
0402 0R1 121 121 680 330 *
0504 0R1 681 681 391 151 *
0603 0R1 331 331 181 101 *
0805 0R1 222 222 122 821 471
1005 1R0 472 472 222 122 681
1206 1R0 822 822 472 182 102
1210 5R0 183 153 103 392 222
1808 100 223 223 123 472 222
1812 100 333 333 183 682 392
1825 270 823 823 563 223 123
2221 270 823 823 563 223 123
2225 270 104 104 683 273 153
25V 50V 100V 250V 500V
X7R/BX DIELECTRIC
SIZE
Min Cap MAX CAP & VOLTAGE
0402 121
X7R BX
0504 121
X7R BX
0603 121
X7R BX
822 822 682 272 562 272 182 331 * *
0805 121
X7R BX
1005 121
X7R BX
1206 121
X7R BX
1210 121
X7R BX
394 394 334 154 224 683 563 123 223 332
1808 151
X7R BX
1812 271
X7R BX
1825 471
X7R BX
185 824 334 683 183
2221 561
X7R BX
2225 681
X7R BX
185 105 394 823 223
25V 50V 100V 250V 500V
332 332 272 122 222 471 471 * * *
183 183 153 562 123 472 272 681 * *
563 563 473 273 393 123 123 182 392 561
104 104 184 184 823 393 154 683 683 183 104 393 183 332 273 682 562 102 103 182
474 474 824 824 185 394 224 684 334 185 274 823 564 124 125 563 153 104 273 274 223 392 393 682 124
155 155 185 155 824 185 105 334 125 224 683 274 124 183 154
18
L
T
W
MB
DIMENSIONS +/- INCHES (MM)
SIZE
0402
0504
0603
0805
1005
1206
1210
1808
1812
1825
2221
2225
LENGTH L .040 (1.02) WIDTH W .020 (.508) T MAX. .024 (.610) MB .010 (.254)
.050 (1.27) .060 (1.52) .080 (2.03) .100 (2.54) .125 (3.18) .040 (1.02) .030 (.760) .050 (1.27) .050 (1.27) .060 (1.52) .044 (1.12) .035 (.889) .054 (1.37) .054 (1.37) .064 (1.63) .014 (.355) .014 (.355) .020 (.508) .020 (.508) .020 (.508)
.125 (3.18) .180 (4.57) .180 (4.57) .180 (4.57) .220 (5.59) .220 (5.59) .100 (2.54) .080 (2.03) .125 (3.18) .250 (6.35) .210 (5.33) .250 (6.35) .065 (1.65) .065 (1.65) .065 (1.65) .080 (2.03) .080 (2.03) .080 (2.03) .020 (.508) .024 (.610) .024 (.610 .024 (.610) .030 (.760) .030 (.760)
TOLERANCES +/- INCHES (MM)
LENGTH WIDTH MB .004 (.102) .004 (.102) .006 (.152) .006 (.152) .006 (.152) .008 (.203) .006 (.152) .006 (.152) .008 (.203) .006 (.152) .006 (.152) .010 (.254) .008 (.203) .008 (.203) .008 (.203) .008 (.203) .010 (.254) .010 (.254) .008 (.203) .012 (.305) .012 (.305) .012 (.305) .015 (.380) .015 (.380) .008 (.203) .008 (.203) .008 (.203) .015 (.380) .015 (.380) .015 (.380) .010 (.254) .014 (.355) .014 (.355) .014 (.355) .015 (.380) .015 (.380)
MIL-PRF SCREENING FLOWCHARTS
MIL-PRF-55681
(GROUP A) 100% ELECTRICALS DPA VISUAL INSPECTION VOLTAGE CONDITIONING 100 HRS, 2X VDCW, 125C DWV, IR, HOT IR, CAP, DF TEST VISUAL & MECH. INSPECTION SOLDERABILITY B&C ENVIRONMENTAL & LIFE TEST
MIL-PRF-123
(GROUP A) THERMAL SHOCK VOLTAGE CONDITIONING 168 HRS, 2X VDCW, 125C VISUAL & MECH. INSPECTION DPA DWV, IR, CAP, DF TEST
MIL-PRF-49467
(GROUP A) THERMAL SHOCK DWV VOLTAGE CONDITIONING 96 HRS, VDCW, 125C PARTIAL DISCHARGE CAP, DF, DWV. IR TESTING VISUAL & MECH. INSPECTION SOLDERABILITY
B&C ENVIRONMENTAL & LIFE TEST
B&C ENVIRONMENTAL & LIFE TEST
HOW TO ORDER
1210
SIZE
X
104
Value in Picofarads Two significant figures, followed by number of zeros: 104=100,000pF
M
TOLERANCE
F = +/- 1% G = +/- 2% COG only J = +/- 5% K = +/- 10% M = +/- 20%
250
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 250=25V
N
TERMINATION
N = Nickel Barrier 90/10 Sn/Pb P = Silver Palladium
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if Non EIA thickness is required.
H
HI REL TESTING
Specify Test Criteria
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
DIELECTRIC CAPACITANCE
See Chart N = NPO X = BX B = X7R
19
THIN PROFILE CAPACITORS
Popular EIA size chips are offered in very thin profile configuration with COG, X7R, Z5U and Y5V dielectric characteristics rated at 5 Vdc to 50 Vdc, for use as decoupling capacitors under other circuit elements, or for low profile RFID and "Smart Card" circuitry.
MAX CAPACITANCE AT DISCRETE THICKNESS 3 digit code: two significant digits, followed by number of zeros eg: 472= 4700 pF. R denotes decimal, eg. 2R7 = 2.7 pF
SIZE
LENGTH L WIDTH W MB
0805
.080 (2.03) .050 (1.27) .020 (.508)
1206
.125 (3.18) .060 (1.52) .020 (.508)
1210
.125 (3.18) .100 (2.54) .020 (.508)
MAXIMUM THICKNESS INCHES MM .012 .305 .015 .381 .018 .457 .015 .381 .018 .457 .020 .508 .015 .381 .018 .457 .020 .508
COG DIELECTRIC
L T
Min Cap
V O LTA G E
W MB
0R1
122 821 681 471
0R1
182 122 102 821
0R1
222 152 122 102
0R5
472 332 272 182
0R5
562 392 332 272
0R5
682 472 392 272
3R0
822 392 472 332
3R0 3R0
103 682 562 472 123 822 682 562
5V 16V 25V 50V
@
X7R DIELECTRIC
CAP
Min Cap
5V 16V 25V 50V
121
223 223 153 123
121
273 273 223 183
121
473 393 273 223
121
683 683 563 333
121
823 823 683 563
121
104 104 823 683
121
124 124 104 823
121
184 154 124 104
121
184 184 154 124
MAX
DIMENSIONAL TOLERANCES LENGTH L WIDTH W MB
+/-
INCHES
(MM)
.008 (.203) .008 (.203) .010 (.254)
.008 (.203) .008 (.203) .010 (.254)
.008 (.203) .008 (.203) .010 (.254)
20
MAX CAPACITANCE AT DISCRETE THICKNESS (continued)
SIZE
LENGTH L WIDTH W MB
0805
.080 (2.03) .050 (1.27) .020 (.508)
1206
.125 (3.18) .060 (1.52) .020 (.508)
1210
.125 (3.18) .100 (2.54) .020 (.508)
MAXIMUM THICKNESS
INCHES MM
.012 .305
.015 .381
.018 .457
.015 .381
.018 .457
.020 .508
.015 .381
.018 .457
.020 .508
Z5U DIELECTRIC
Min Cap
V O LTA G E
391
124 124 683 473
391
154 154 104 683
391
254 254 124 823
561
274 274 224 154
561
394 394 274 184
561
394 394 334 224
561
564 564 474 334
561
684 684 564 394
561
824 824 684 474
5V 16V 25V 50V
@
Y5V DIELECTRIC
CAP
Min Cap
5V 16V 25V 50V
121
154 154 823 563
121
184 184 124 823
121
274 274 154 104
121
334 334 274 184
121
474 474 334 224
121
474 474 394 274
121
684 684 564 394
121
824 824 684 474
121
105 105 824 564
HOW TO ORDER
0805
SIZE
See Chart
Z
DIELECTRIC
N = COG B = X7R Z = Z5U Y = Y5V
104
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 104=100,000pF
MAX
M
TOLERANCE
J = +/- 5% K = +/- 10% COG, X7R Only M = +/- 20% Z = + 80% - 20% P = +100% - 0%
160
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 160 =16V
N
TERMINATION
N = Nickel Barrier V = Non solderable Silver P = Ag-Pd COG, X7R Only
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if Non EIA thickness is required.
T
PACKING OPTION
T=Reeled
21
HIGH TEMPERATURE SMT
NOVACAP manufactures chip capacitors designed to operate to 200C in both COG and X7R dielectrics, for use in harsh environments, such as oil exploration and engine compartment circuitry. Product is available as surface mount chips in sizes 0805 to 7565, or as leaded encapsulated devices in sizes 1515 to 7565, rated to 500 volts (see additional data sheet). Consult NOVACAP for your specific requirements.
CAPACITANCE SELECTION 3 digit code: two significant digits, followed by number of zeros eg: 183 = 18,000 pF
SIZE
LENGTH L WIDTH W T MAX. MB
0805
.080 (2.03) .050 (1.27) .054 (1.37) .020 (.508)
1206
.125 (3.18) .060 (1.52) .064 (1.63) .020 (.508)
1210
.125 (3.18) .100 (2.54) .065 (1.65) .020 (.508)
200C
1812
.180 (4.57) .125 (3.18) .065 (1.65) .024 (.610)
1825
.180 (4.57) .250 (6.35) .080 (2.03) .024 (.610)
2225
.220 (5.59) .250 (6.35) .080 (2.03) .030 (.760)
4540
.450 (11.4) .400 (10.2) .300 (7.62) .060 (1.52)
7565
.750 (19.0) .650 (16.5) .400 (10.2) .060 (1.52)
-
COG DIELECTRIC
VOLTAGE
Min Cap
25V 50V 100V 250V 500V
0R5
222 152 821 561 331
1R0
682 562 272 182 821
5R0
123 123 472 392 182
200C
220
223 183 822 562 272
560
473 393 223 183 822
680
563 473 273 223 103
221
224 154 124 124 563
102
474 474 474 274 184
@
-
X7R DIELECTRIC
CAP
Min Cap
25V 50V 100V 250V 500V
121
563 473 333 153 332
221
184 124 823 393 822
331
334 274 184 823 183
331
684 474 394 154 393
471
125 684 394 184 563
471
155 684 394 224 563
102
565 395 275 225 824
103
186 126 106 685 335
MAX
DIMENSIONAL TOLERANCES LENGTH L WIDTH W MB
+/-
INCHES
(MM)
.015 (.380) .015 (.380) .015 (.380) .015 (.380) .015 (.380) .015 (.380) .015 (.380) .015 (.380) .015 (.380)
.008 (.203) .008 (.203) .010 (.254)
.008 (.203) .008 (.203) .010 (.254)
.008 (.203) .008 (.203) .010 (.254)
.012 (.305) .008 (.203) .014 (.355)
.012 (.305) .015 (.380) .014 (.355)
22
COG "D" CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT UP TO 125C: DISSIPATION FACTOR @ 25C: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
X7R "E" DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT UP TO 125C: DISSIPATION FACTOR @ 25 C: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
-55C to 200C 0 +/- 30 ppm/C .001 (0.1%) max > 100G or >1000F > 10G or >100F < 200V, 250% 201-500V,150% or 500V* > 500V, 120%, or 750V* 0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C 1MHZ for Capacitance <100pF
-55C to 200C See TC Graph below. 2.5% max @ >25V, 3.5% max 25V > 100G or >1000F > 10G or >100F < 200V, 250% 201-500V,150% or 500V* > 500V, 120%, or 750V* < 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C
AGING RATE: TEST PARAMETERS:
AGING RATE: TEST PARAMETERS:
%C 40 20
TEMPERATURE COEFFICIENT
F
MINIMUM IR VS.TEMPERATURE
M
1000 0 -20 -40 10 -60 -80 -55 -25 0 25 50 75 100 125 150 175 200C 0 25 50 75 100 125 150 175 200C 100
100K
10K
1K
0
COG
X7R
F
M WHICHEVER IS LESS FOR ANY GIVEN CAPACITANCE
L
T
W
MB
HOW TO ORDER
1210
SIZE
E
104
Value in Picofarads Two significant figures, followed by number of zeros: 104=100,000pF
M
TOLERANCE
F = +/- 1% G = +/- 2% COG only J = +/- 5% K = +/- 10 % M = +/- 20 %
250
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 250=25V
P
TERMINATION
P= Silver Palladium N=Nickel Barrier, for less than 160C operation
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if Non EIA thickness is required.
H
HI REL TESTING
Ref:
MIL-PRF-55681
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
DIELECTRIC CAPACITANCE
See Chart D = 200C COG E = 200C X7R
23
RING DETECT CAPACITORS
NOVACAP offers a line of low ESR surface mount capacitors ideally suited for "Tip & Ring" applications. These units are designed with 250 VDC rating to withstand the 52 VDC bias and 150 VRMS signal during ring cadence. Chips are offered in X7R dielectric from 0.39F to 1.00F in sizes 1812, 1825 and 2225. Product is also available in Z5U and Y5V dielectric from 0.47F to 1.30F for other ring detection circuits.
MAX CAPACITANCE @ 250 VDC 3 digit code: two significant digits, followed by number of zeros eg: 394 = 390,000 pF (0.39F)
SIZE
LENGTH L WIDTH W T MAX MB
1812
.180 (4.57) .125 (3.18) .095 (2.41) .024 (.610)
1825
.180 (4.57) .250 (6.35) .095 (2.41) .024 (.610)
2225
.220 (5.59) .250 (6.35) .095 (2.41) .030 (.760)
X7R DIELECTRIC
MAXCAP@250V
474
824
105
Z5U / Y5V DIELECTRIC
L T
MAXCAP@250V
W MB
564
105 +/INCHES
135 (MM) .015 (.380) .015 (.380) .015 (.380)
DIMENSIONAL TOLERANCES
LENGTH L WIDTH W MB
.012 (.305) .008 (.203) .014 (.355)
.012 (.305) .016 (.406) .014 (.355)
HOW TO ORDER
RD1812
SIZE
See Chart
Y
DIELECTRIC
B = X7R Z = Z5U Y = Y5V
474
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 474 = 470,000pF
M
TOLERANCE
J = +/- 5% X7R Only K = +/- 10% M = +/- 20% Z = +80% - 20% P = +100% - 0%
251
VOLTAGE-VDCW
251 = 250VDC
N
TERMINATION
N = Nickel Barrier 90/10 Sn/Pb
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if Non EIA thickness is required.
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
24
CERTIFIED SAFETY CAPACITORS
NOVACAP offers a line of MLC chip capacitors, sizes LS 1808, LS 1812, ES 2211 and ES 2215, X2, Y3 / Y2 Class Compliant* specifically designed for use in modem, facsimile, telephone and other electronic equipment where lightning or overvoltage surges can occur. These parts are rated at 3,000 Vdc (Y3) or 5000 Vdc (Y2) and 250 Vac safety approved and certified to EN 60950. The product is compliant to Standards EN 132400: 1994/A2: 1998/IEC60384-14, Second Edition: 1993/A1:1995, and meet the requirements of EN61000-4-5, IEC1000-4-5, and IEC801-4-5. Capacitors are available in COG (NP0) dielectric.
SIZE
LENGTH L WIDTH W T MAX
L T
LS 1808
(Y3)
.180 (4.57) .080 (2.03) .080 (2.03) .024 (.609) Typical .102 (2.60) Min
LS 1812
(Y3)
.180 (4.57) .125 (3.18) .120 (3.05) .102 (2.60) Min
1000-2200pF
ES 2211
(Y2)
.220 (5.58) .110 (2.79) .110 (2.79) .102 (3.00) Min
5-680pF
ES 2215
(Y2)
.220 (5.58) .150 (3.81) .150 (3.81) .102 (3.00) Min
1000pF
MB CREEPAGE
.024 (.609) Typical .030 (.762) Typical .030 (.762) Typical
W
MB
CAP RANGE 5-1000pF
CERTIFICATION NUMBERS
TUV STANDARDS
R9972698.01,.02,.03 (LS 1808), R9972698.05 (LS 1812) & R2072738.01 (ES 2211, ES 2215)
EN 132400, EN 60950, IEC 60384-14 Second Edition, Class X2 Y3
Part Identification Marking will be placed on the reel.
HOW TO ORDER
LS1808
SIZE
LS 1808 LS 1812 ES 2211 ES 2225
N
DIELECTRIC
N = COG
301
CAPACITANCE MAX VALUE IS 1000pF
Two significant figures, followed by number of zeros: 331 = 330pF
K
TOLERANCE
J = +/- 5 % K = +/- 10 % M = +/- 20 %
302
VOLTAGE-VDCW
LS 302 = 3000 VDC ES 502 = 5000 VDC
N
TERMINATION
N = Nickel Barrier 90/10 Sn/Pbr
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if required.
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
Part marking available upon request
*Compliant with Robustness of Termination (cl 4.3) test according to IEC 60384-1 amendment 3 cl 4.34 and 4.35 Resistance to Soldering Heat (cl 4.4) tested according to IEC 60384-1 amendment 3 cl. 4.14.2, Impulse Test made with 2.5 KV or 5.0KV as required according to 6.4.2.1 in EN 60950. The creepage distance between live parts of different polarity meets the requirements of IEC 60950.
25
HIGH VOLTAGE MLC
-
COMMERCIAL
COMMERCIAL RANGES
NOVACAP high voltage products are designed, manufactured and tested 100% for optimum performance. These capacitors offer the highest capacitance available per kilovolt rating, in COG and X7R characteristics and are appropriate for commercial/industrial applications to 10 KV. The non- polar inner electrode design permits capacitors to be arrayed in stacks with no voltage gradient between units. Chips have rounded surfaces to improve structural integrity and encapsulation in use. Applications include power supL T
ply and voltage multiplier circuits. Other sizes and voltage ratings are available, please consult the factory. High reliability versions are offered and have restricted capacitance ranges, please refer to other NOVACAP data sheets.
W
MB
COMMERCIAL RANGES, RATED TO 6 KV
SIZE
Min Cap LENGTH L WIDTH W T MAX MB
1515 100
.150 (3.81) .150 (3.81) .130 (3.30) .040 (1.02)
1808 100
.180 (4.57) .080 (2.03) .080 (2.03) .038 (.965)
1812 150
.180 (4.57) .125 (3.18) .100 (2.54) .038 (.965)
1825 390
.180 (4.57) .250 (6.35) .140 (3.56) .038 (.965)
2020 390
.200 (5.08) .200 (5.08) .180 (4.57) .045 (1.14)
2225 390
.220 (5.59) .250 (6.35) .150 (3.81) .045 (1.14)
2520 390
.250 (6.35) .200 (5.08) .180 (4.57) .050 (1.27)
3333 390
.330 (8.38) .330 (8.38) .250 (6.35) .050 (1.27)
MAXIMUM CAPACITANCE
3 Digit Code: See How to Order
COG
E
X7R
184 104 823 563 822 332 152 * *
COG
332 272 222 182 102 471 121 * *
X7R
823 683 393 223 392 122 561 * *
COG
562 472 472 392 222 102 271 * *
X7R
154 124 823 473 822 272 122 * *
COG
183 123 123 103 682 332 102 471 *
X7R
474 274 224 184 273 103 472 102 *
COG
183 103 682 682 472 272 821 391 *
X7R
474 224 154 124 223 822 392 102 *
COG
223 153 123 123 103 472 681 681 *
X7R
564 394 274 224 333 123 682 152 *
COG
273 123 103 103 682 392 152 561 *
X7R
684 334 224 184 333 123 562 222 *
COG
563 333 183 183 123 103 392 222 102
X7R
105 564 474 394 683 333 153 822 562
500V 600V 800V 1000V 2000V 3000V
682 392 392 392 222 102 331 * *
O V
L
T
A
G
4000V 5000V 6000V
Dimensions are in inches, bracketed dimensions in millimeters. Tolerances are +/- 5% L & W, or .015" (0.38 mm), whichever is greater. MB dimensions are maximum. T Max. for chip sizes 1808, 1812, 1825 and 2225 are greater than standard EIA max. thickness for those sizes.
26
HIGH VOLTAGE MLC
-
COMMERCIAL
L
T
W
MB
COMMERCIAL RANGES, RATED TO 10 KV
SIZE
Min Cap LENGTH L WIDTH W T MAX MB
3530 390
.350 (8.89) .300 (7.62) .250 (6.35) .050 (1.27)
4040 390
.400 (10.2) .400 (10.2) .300 (7.62) .060 (1.52)
4540 390
.450 (11.4) .400 (10.2) .300 (7.62) .060 (1.52)
5440 390
.540 (13.7) .400 (10.2) .300 (7.62) .060 (1.52)
5550 390
.550 (11.4) .500 (12.7) .300 (7.62) .060 (1.52)
6560 560
.650 (16.5) .600 (15.2) .300 (7.62) .060 (1.52)
7565 101
.750 (19.0) .650 (16.5) .400 (10.2) .060 (1.52)
MAXIMUM CAPACITANCE
3 Digit Code: See How to Order
COG 500V
E
X7R
105 394 683 333 183 822 562 332 272 222 182
COG
393 333 223 183 822 392 152 152 152 122 102
X7R
105 684 154 683 273 183 123 822 562 472 392
COG
823 393 273 223 103 472 222 182 152 152 122
X7R
185 824 154 823 333 223 123 822 682 562 392
COG
104 473 333 223 123 562 332 222 182 182 152
X7R
225 824 184 823 393 223 153 103 822 562 472
COG
124 563 393 333 153 682 392 332 272 222 222
X7R
275 125 274 124 563 393 223 153 123 103 822
COG
154 104 683 563 223 123 682 562 392 332 332
X7R
395 185 394 184 104 473 333 223 153 123 103
COG
224 124 823 683 393 183 103 822 562 472 392
X7R
565 225 684 334 154 823 563 393 333 273 223
563 183 123 103 472 272 122 821 821 681 561
1000V 2000V 3000V
A T L O V
G
4000V 5000V 6000V 7000V 8000V 9000V 10000V
Dimensions are in inches, bracketed dimensions in millimeters. Tolerances are +/- 5% L & W, or .015" (0.38 mm), whichever is greater. MB dimensions are maximum.
27
HIGH VOLTAGE MLC
-
COMMERCIAL
COG DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
X7R DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25 C: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
-55C to 125C 0 +/- 30 ppm/C .001 (0.1%) max @ 25C >100G or >1000F >10G or >100F 120% VDCW, or 750V*
-55C to 125C +/-15% C Max. .025 (2.5%) max @ 25C >100G or >1000F >10G or >100F 120% VDCW, or 750V*
AGING RATE: TEST PARAMETERS:
0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C 1MHZ for Capacitance <100pF
AGING RATE: TEST PARAMETERS:
< 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C
%C
TYPICAL VOLTAGE COEFFICIENT
COG
Dielectric withstanding voltage testing requires
0 -10 -20 -30 -40 -50 -60 2KV 4KV
2KV
X7R X7R X7R
immersion of the device in a dielectric fluid to
X7R
preclude arcing over the chip surface, notably at
10KV 6KV 8KV
voltages exceeding 1000 VDC. Conformal coating
6KV 8KV 10KV
of chips is recommended in use to eliminate arcing.
HOW TO ORDER
4540
SIZE
See Chart
B
DIELECTRIC
N = COG B = X7R
103
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 103 = 10,000 pF
M
TOLERANCE
J = +/- 5 % K = +/- 10 % M = +/- 20 % Z = +80%-20% P = +100%-0%
302
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 302=3000V
N
TERMINATION
N= Nickel Barrier sizes 1515 to 4540 only P = Silver Palladium S = Silver
X
THICKNESS OPTION
X=Non standard thickness. Specify in Mils if Non EIA thickness is required.
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
28
HIGH VOLTAGE MLC
-
HIGH RELIABILITY
HIGH RELIABILITY RANGES
NOVACAP high voltage capacitors are available specially tested for long term reliability. The non-polar inner electrode design permits capacitors to be arrayed in stacks with no voltage gradient between units. Chips have rounded surfaces to improve structural integrity and encapsulation in use. Units may be tested to MIL-PRF-49467 and MIL-PRF-55681. Applications include aerospace, airborne and military use for radar, power supplies and voltage multiplier circuits. Other sizes and voltage ratings are available, please consult NOVACAP. Commercial versions with higher capacitance efficiency per kilovolt are also available, please refer to other NOVACAP data sheets.
L T
W
MB
HIGH RELIABILITY RANGES, RATED TO 6 KV
SIZE
Min Cap LENGTH L WIDTH W T MAX MB
1515 100
.150 (3.81) .150 (3.81) .130 (3.30) .040 (1.02)
1808 100
.180 (4.57) .080 (2.03) .080 (2.03) .038 (.965)
1812 150
.180 (4.57) .125 (3.18) .100 (2.54) .038 (.965)
1825 390
.180 (4.57) .250 (6.35) .140 (3.56) .038 (.965)
2020 390
.200 (5.08) .200 (5.08) .180 (4.57) .045 (1.14)
2225 390
.220 (5.59) .250 (6.35) .150 (3.81) .045 (1.14)
2520 390
.250 (6.35) .200 (5.08) .180 (4.57) .050 (1.27)
3333 390
.330 (8.38) .330 (8.38) .250 (6.35) .050 (1.27)
MAXIMUM CAPACITANCE
3 Digit Code: See How to Order
COG
E
X7R
683 563 473 333 392 122 * * *
COG
272 222 222 182 102 221 * * *
X7R
333 273 183 123 152 471 * * *
COG
562 472 472 392 222 471 * * *
X7R
563 473 393 273 332 102 * * *
COG
123 123 103 103 682 152 102 471 *
X7R
224 184 124 823 123 392 222 102 *
COG
123 822 682 682 472 122 821 391 *
X7R
124 124 104 683 103 332 182 102 *
COG
153 153 123 123 103 102 681 561 *
X7R
274 224 184 124 183 562 272 152 *
COG
183 123 103 103 682 222 152 561 *
X7R
184 154 154 104 153 822 392 222 *
COG
473 273 183 183 123 562 392 182 102
X7R
474 394 394 274 563 273 153 822 562
500V 600V 800V 1000V 2000V 3000V
472 392 392 332 222 561 * * *
O V
L
T
A
G
4000V 5000V 6000V
Dimensions are in inches, bracketed dimensions in millimeters. Tolerances are +/- 5% L & W, or .015" (0.38 mm), whichever is greater. MB dimensions are maximum. T Max. for chip sizes 1808, 1812, 1825 and 2225 are greater than standard EIA max. thickness for those sizes.
29
HIGH VOLTAGE MLC
- HIGH
RELIABILITY
L
T
W
MB
HIGH RELIABILITY RANGES, RATED TO 10KV
SIZE
Min Cap LENGTH L WIDTH W T MAX MB
3530 390
.350 (8.89) .300 (7.62) .250 (6.35) .050 (1.27)
4040 390
.400 (10.2) .400 (10.2) .300 (7.62) .060 (1.52)
4540 390
.450 (11.4) .400 (10.2) .300 (7.62) .060 (1.52)
5440 390
.540 (13.7) .400 (10.2) .300 (7.62) .060 (1.52)
5550 390
.550 (11.4) .500 (12.7) .300 (7.62) .060 (1.52)
6560 560
.650 (16.5) .600 (15.2) .300 (7.62) .060 (1.52)
7565 101
.750 (19.0) .650 (16.5) .400 (10.2) .060 (1.52)
MAXIMUM CAPACITANCE
3 Digit Code: See How to Order
COG 500V
E
X7R
394 274 683 333 183 822 472 332 * * *
COG
393 333 223 123 822 332 182 152 152 * *
X7R
684 474 104 393 273 183 123 822 562 * *
COG
683 393 273 153 103 392 222 182 152 152 122
X7R
824 564 124 563 333 223 123 822 682 562 392
COG
823 473 333 183 123 472 332 222 182 182 152
X7R
105 684 124 823 393 223 153 103 822 682 472
COG
124 563 393 223 153 562 392 272 272 222 222
X7R
125 824 184 104 563 393 223 153 123 103 822
COG
154 104 683 393 223 123 682 562 392 332 272
X7R
185 125 334 184 104 473 333 223 153 123 103
COG
224 124 823 473 393 153 103 822 562 472 392
X7R
275 185 474 224 154 823 563 393 333 273 223
473 183 123 682 472 222 122 821 * * *
1000V 2000V 3000V
A T L O V
G
4000V 5000V 6000V 7000V 8000V 9000V 10000V
Dimensions are in inches, bracketed dimensions in millimeters. Tolerances are +/- 5% L & W, or .015" (0.38 mm), whichever is greater. MB dimensions are maximum.
30
HIGH VOLTAGE MLC
- HIGH
RELIABILITY
COG DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
X7R DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25 C: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
-55C to 125C 0 +/- 30 ppm/C .001 (0.1%) max @ 25C >100G or >1000F >10G or >100F 120% VDCW, or 750V*
-55C to 125C +/-15% C Max. .025 (2.5%) max @ 25C >100G or >1000F >10G or >100F 120% VDCW, or 750V*
AGING RATE: TEST PARAMETERS:
0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C 1MHZ for Capacitance <100pF
AGING RATE: TEST PARAMETERS:
< 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C
%C
TYPICAL VOLTAGE COEFFICIENT
COG
Dielectric withstanding voltage testing requires
0 -10 -20 -30 -40 -50 -60 2KV 4KV
2KV
X7R X7R X7R
immersion of the device in a dielectric fluid to
X7R
preclude arcing over the chip surface, notably at
10KV 6KV 8KV
voltages exceeding 1000 VDC. Conformal coating
6KV 8KV 10KV
of chips is recommended in use to eliminate arcing.
HOW TO ORDER
4540
SIZE
B
103
Value in Picofarads Two significant figures, followed by number of zeros: 103 = 10,000 pF
M
TOLERANCE
J = +/- 5 % K = +/- 10 % M = +/- 20 % Z = +80% - 20% P = +100% - 0%
302
Two significant figures, followed by number of zeros: 302 = 3000V
N
X
THICKNESS
H
HIGH RELIABILITY TEST
Specify Test
T
PACKING OPTION
T=Reeled
M
MARKING OPTION
M=Marked (See Marking Specifications)
DIELECTRIC CAPACITANCE
VOLTAGE-VDCW TERMINATION
See Chart N = COG B = X7R
N= Nickel Barrier OPTION sizes 1515 X=Non to 4540 only standard P = Silver thickness. Palladium Specify in S = Silver Mils if Non EIA thickness is required.
31
SPECIALTY MLC PRODUCTS
NOVACAP produces a variety of specialty surface mount MLC sizes, as well as feed thru capacitors, available in COG, X7R, Z5U or Y5V dielectrics. The data sheet shows some of the other chip sizes and specialty product currently fabricated. NOVACAP will manufacture custom product to customer SCD. Please consult the factory with your particular requirements.
SPECIAL MLC SIZES 25 TO 250 VOLT RATINGS (Shown in ascending length dimension-inches)
CHIP SIZE 0 4 03 0 6 12 0 7 05 0 8 10 0 9 05 0 9 07 1 1 06 1 2 04 1 2 05 1 2 14 1 4 05 1 5 05 1 7 06 1 8 05 2 0 18 2 2 18 2 2 20 2 2 24 2 3 26 2 4 21 2 4 26 2 5 18 2 5 25 2 6 28 2 8 15 2 8 38
L .040 .060 .070 .080 .090 .090 .110 .120 .120 .120 .140 .150 .170 .180 .200 .220 .220 .220 .230 .240 .240 .250 .250 .260 .280 .280
W .030 .125 .050 .100 .050 .070 .060 .040 .050 .140 .050 .050 .060 .050 .180 .180 .200 .240 .260 .210 .260 .180 .250 .280 .150 .380
T MAX .033 .060 .054 .060 .054 .060 .050 .044 .054 .065 .054 .054 .050 .054 .120 .120 .120 .120 .120 .150 .150 .150 .150 .200 .150 .150
CHIP SIZE 2868 2959 3018 3025 3058 3438 3520 3625 3640 3680 3840 3915 4036 43100 43200 4848 4896 4920 4940 55100 5830 5868 5880 5929 78150 100100 100200
L .280 .290 .300 .300 .300 .340 .350 .360 .360 .360 .380 .390 .400 .430 .430 .480 .480 .490 .490 .550 .580 .580 .580 .590 .780 1.00 1.00
W .680 .590 .180 .250 .580 .380 .200 .250 .400 .800 .400 .150 .360 1.00 2.00 .480 .960 .200 .400 1.00 .300 .680 .800 .290 1.50 1.00 2.00
T MAX .150 .150 .150 .180 .180 .180 .180 .180 .250 .200 .200 .250 .250 .250 .250 .300 .300 .200 .300 .300 .300 .300 .300 .300 .300 .300 .400
32
HIGH VOLTAGE SPECIAL SIZES TO 10 KV (Shown in ascending length dimension-inches)
LOW ESR - ESL CHIP CAPACITORS
SPECIALTY MLC APPLICATIONS
CHIP SIZE
NOVACAP produces chips terminated along the long
L .220 .230 .230 .300 .300 .300 .330 .340 .350 .350 .400 .500 .510 .520 .540 .600 .600 .660 .700 .700 .700 .800 .800 .900 1.10 1.30
W .110 .190 .210 .100 .150 .300 .270 .240 .450 .600 .200 .400 .280 .480 .400 .400 .600 .660 .300 .600 .650 .400 .800 .400 .500 .600
T MAX .180 .180 .180 .200 .200 .200 .250 .250 .250 .250 .300 .300 .300 .300 .300 .300 .300 .300 .300 .300 .300 .400 .400 .400 .400 .400
electrode axis (sizes 0612, 0810 and 1214) to reduce
2211 2319 2321 3010 3015 3030 3327 3424 3545 3560 4020 5040
current paths and resistance to charging current flow
between electrodes, qualities which lower ESR and ESL
for improved performance in high speed de-coupling.
HIGH VOLTAGE
SPECIALTY MLC APPLICATIONS
5128 5248 5440 6040 6060 6666 7030 7060 7065 8040 8080 9040 11050 13060
NOVACAP specializes in High Voltage applications. The
sizes listed are designed with multiple cascading internal
electrodes, to better distribute charge
and minimize
dielectric stress for enhanced reliability.
Contact
NOVACAP for solutions to your high voltage needs.
"FEED-THRU" COMPONENTS
FEED-THRU COMPONENTS
NOVACAP manufactures feed thru units used to provide signal conduits through openings while suppressing EMI and RFI interference. Capacitors are constructed with ground plane electrodes completely surrounding the signal feed thru contact, to provide very low ESR and ESL for most effective filtering. Units are supplied as single or multiple devices, with Ag/Pd terminations for easy surface mount attachment to chassis openings. Available in COG, X7R Z5U or Y5V dielectrics, 25 VDC to 1000 VDC rating. Consult NOVACAP for design styles, capacitance ranges, or to specify your requirements.
33
CAPACITOR ARRAYS
The Cap-Rack (US Patent 6,058,004) is an assembly of individual chip capacitors, bonded with high temperature epoxy. This construction permits the assembly of dissimilar capacitance values or dielectrics into one single component, providing extended freedom for board space utilization. The design reduces harmful thermal stress during assembly, behaving as individual components, not as a single large ceramic mass. The Cap-Rack also reduces "cross talk" to insignificant levels by elimination of capacitance coupling between adjacent capacitors. Cap-Racks are available as groupings of chip sizes 0603, 0805, 1005, 1206, 1210, 1808 and 1812, from pairs to as many as eight chips. See separate data sheets for capacitance ranges of the various sizes. Custom sizes, particularly for high voltage applications, are also available. Footprint dimensions can vary to optimize board space usage. The tables provide typical dimensions and footprints for highest capacitance designs. Consult NOVACAP for your specific requirements.
TYPICAL 4 UNIT ARRAYS
ARRAY SIZE
L (+/- .015) T MAX. W MAX. p (+/- .010) MB MAX.
CR0612
.060 (1.52) .036 (.914) .126 (3.20) .035 (.890) .014 (.356)
CR1218
.120 (3.05) .060 (1.52) .265 (6.73) .067 (1.70) .030 (.760)
MAXIMUM CAPACITANCE PER CHIP
(3 Digit Code)
COG
VOLTAGE
X7R
273 183 183 103 682 *
Y5V
184 124 823 333 562 *
COG
153 123 103 562 272 102
X7R
334 274 224 124 563 273
Y5V
185 155 125 334 683 *
16V 25V 50V 100V 250V 500V
102 821 681 331 181 *
34
Cap Arrays
require
.010 typ
drawings to specify length and width of
L
array, and chip used. Contact Novacap to specify your Cap- Rack
T
P
requirement.
MB
W
TYPICAL CONSTRUCTION
Dimensions "P" and "W" may be less than shown when thinner chips are utilized.
HOW TO ORDER
CR
STYLE
Cap-Rack
XXYY
SIZE
XX= Length of Array YY = Width 0818 = .080 x .180
N
DIELECTRIC
N = COG B = X7R Y = Y5V
272
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 272 = 2700 pF
K
TOLERANCE
B = 0.10 pF C = 0.25 pF D = 0.50 pF F = +/- 1.0 % G = +/- 2.0 % H = +/- 3.0 %
101
Two significant figures, followed by number of zeros: 101 = 100V
N
N = NickelBarrier P = Ag-Pd
4
NUMBER OF CHIPS
H
HI REL OPTION
Ref: MIL-PRF-55681
W
PACKING OPTION
T=Reeled
VOLTAGE-VDCW TERMINATION
J = +/- 5.0 % K = +/- 10 % M= +/- 20 % Z = +80% -20% P = +100% -0%
COG
35
HIGH-TEMP CAPACITORS
NOVACAP manufactures encapsulated capacitors designed to operate to 200 C in both COG and X7R dielectrics for use in very harsh environments, where isolation and protection of the device is required for optimum reliability. Product is available as encapsulated devices with 22 AWG tinned copper leads, in sizes 1515 to 7565, rated to 500 volts, marked with capacitance and voltage ratings. Consult NOVACAP for your specific requirements.
CAPACITANCE SELECTION
3 digit code: two significant digits, followed by number of zeros eg: 183 = 18,000 pF
103K 100V
103K 100V
103K 100V
102K 500V
275K 250V
106K 100V
156K 50V
SIZE
W MAX. H MAX. T MAX. S +/- .030
1515
.300 (7.62) .300 (7.62) .150 (3.81) .170 (4.32)
2520
.400 (10.2) .400 (10.2) .200 (5.08) .280 (7.10)
3530
.500 (12.7) .500 (12.7) .265 (6.73) .380 (9.65)
200C
4540
.725 (18.4) .500 (12.7) .325 (8.26) .480 (12.2)
5550
.795 (20.2) .745 (18.9) .350 (8.89) .580 (14.7)
6560
.925 (23.5) .750 (19.0) .350 (8.89) .680 (17.3)
7565
1.125 (28.6) .750 (19.0) .375 (9.52) .780 (19.8)
-
COG DIELECTRIC
VOLTAGE
Min Cap
25V 50V 100V 250V 500V
100
333 333 273 153 562
390
104 104 823 473 183
390
184 184 154 104 473
390
274 274 224 154 823
390
334 334 224 224 124
560
564 474 394 334 184
101
684 684 474 474 224
&
200C CAP
-
X7R DIELECTRIC
Min Cap
25V 50V
102
824 684 564 154 683
102
225 225 185 684 184
102
395 395 335 155 394
102
685 685 565 275 82
122
106 825 685 395 155
182
156 126 106 565 225
272
186 156 126 825 275
MAX
100V 250V 500V
36
COG "D" CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT UP TO 125C: DISSIPATION FACTOR @ 25C: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
X7R "E" DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT UP TO 125C: DISSIPATION FACTOR @ 25 C: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
-55C to 200C 0 +/- 30 ppm/C .001 (0.1%) max > 100G or >1000F > 10G or >100F < 200V, 250% 201-500V,150% or 500V* > 500V, 120%, or 750V* 0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C 1MHZ for Capacitance <100pF
-55C to 200C +/- 15% C max 2.5% max @ >25V, 3.5% max 25V > 100G or >1000F > 10G or >100F < 200V, 250% 201-500V,150% or 500V* > 500V, 120%, or 750V* < 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C
AGING RATE: TEST PARAMETERS:
AGING RATE: TEST PARAMETERS:
%C 40 20
TEMPERATURE COEFFICIENT
F
MINIMUM IR VS.TEMPERATURE
M
1000 0 -20 -40 10 -60 -80 -55 -25 0 25 50 75 100 125 150 175 200C 0 25 50 75 100 125 150 175 200C 100
100K
10K
1K
0
COG
X7R
F
M WHICHEVER IS LESS FOR ANY GIVEN CAPACITANCE
HOW TO ORDER
4540
SIZE
See Chart
E
DIELECTRIC
D = 200C COG E = 200C X7R
104
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 104=100,000pF
M
TOLERANCE
F = +/- 1 % G = +/- 2 % COG only J = +/- 5 % K = +/- 10 % M= +/- 20 %
250
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 250=25V
LC T
TERMINALS
LC = Encapsulated
HM
W
HI REL TEST OPTION
T H
S
1.25" min
22AWG (.025" Diam)
37
RADIAL LEAD HV CAPACITORS
-
COMMERCIAL RANGES
COMMERCIAL RANGES
NOVACAP High Voltage Leaded Capacitors are available in COG and X7R characteristics. Conformal coating and lead mounting provide a rugged configuration for optimum performance, with high capacitance efficiency per KV rating. Units are designed for commercial/industrial use to 10 KV, with application in power supply and voltage multiplier circuits. Minimum voltage is 500 Vdc. Higher voltage ratings are available, as well as high reliability versions, with restricted capacitance ranges. Please refer to other NOVACAP literature, or consult the factory.
102K 2000V
102K 2000V
103K 1000V
103K 5000V
102K 2000V
123M 7000V
274M 3000V
SIZE
W MAX. H MAX. T MAX. S +/- .030
1515
.250 (6.35) .250 (6.35) .200 (5.08) .170 (4.32)
2520
.400 (10.2) .350 (8.89) .250 (6.35) .280 (7.10)
3530
.500 (12.7) .450 (11.4) .350 (8.89) .380 (9.65)
4540
.600 (15.2) .550 (11.4) .400 (10.2) .480 (12.2)
5550
.700 (17.8) .650 (16.5) .400 (10.2) .580 (14.7)
6560
.800 (20.3) .750 (19.0) .400 (10.2) .680 (17.3)
7565
.900 (22.8) .850 (21.6) .500 (12.7) .780 (19.8)
MAXIMUM CAPACITANCE
3 Digit Code: See How to Order
COG 500V
E
X7R
184 104 823 563 822 332 152 * * * * * *
COG
223 123 103 103 682 392 152 561 * * * * *
X7R
564 274 224 184 333 123 562 222 * * * * *
COG
393 273 183 153 123 822 392 182 102 681 471 391 *
X7R
824 564 334 274 473 223 123 562 332 222 152 102 *
COG
563 473 333 223 183 822 272 182 122 122 821 681 *
X7R
125 824 684 564 823 393 183 103 682 472 332 272 222
COG
104 563 563 563 393 273 123 472 332 222 182 152 122
X7R
185 155 125 105 154 683 273 183 123 822 682 562 392
COG
154 104 823 823 563 393 183 562 472 332 272 222 182
X7R
275 225 185 155 224 104 393 273 183 123 822 682 562
COG
224 154 104 104 683 563 333 153 562 472 472 392 392
X7R
475 335 225 185 394 184 823 563 333 223 183 153 123
682 392 392 392 222 102 331 * * * * * *
600V 800V 1000V 2000V 3000V 4000V 5000V 6000V 7000V 8000V 9000V 10000V
V
O
L
T
A
G
Dimensions in inches; bracketed dimensions in millimeters.
38
COG DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
-55C to 125C 0 +/- 30 ppm/C .001 (0.1%) max @ 25C >100G or >1000F >10G or >100F 120% VDCW, or 750V*
AGING RATE: TEST PARAMETERS:
0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C 1MHZ for Capacitance <100pF
%C 0 -10 -20 -30 -40 -50 -60
TYPICAL VOLTAGE COEFFICIENT
COG
X7R DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25 C: -55C to 125C +/-15% C Max. .025 (2.5%) max @ 25C >100G or >1000F >10G or >100F 120% VDCW, or 750V*
X7R
X7R
X7R
X7R
INSULATION RESISTANCE, 25C 125C
2KV 10KV 6KV 8KV
DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
AGING RATE:
< 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C
2KV
4KV
6KV
8KV
10KV
TEST PARAMETERS:
HOW TO ORDER
4540
SIZE
See Chart
B
DIELECTRIC
N = COG B = X7R
103
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 103 = 10,000pF
K
TOLERANCE
J = +/- 5 % K = +/- 10 % M = +/- 20 %
302
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 302 = 3000V
LE T
TERMINALS
LE = Radial Lead Conformal Coat LO = Radial Lead Uncoated
M
W H
.150
T
S
(CL)
1.25" min
22AWG (.025" Diam)
39
RADIAL LEAD HV CAPACITORS
-
HIGH RELIABILITY RANGES
HIGH RELIABILITY RANGES
NOVACAP High Voltage Leaded Capacitors with optimum design and special testing for long term reliability are available in COG and X7R characteristics. Conformal coating and lead mounting provide a rugged configuration for optimum performance. Units may be tested to MIL-PRF-49467 and/or MIL-PRF-39014. Applications include aerospace, airborne and military use for radar, power supplies and voltage multiplier circuits. Higher than cataloged voltage ratings are available. Commercial versions with higher capacitance efficiency per KV are offered, please refer to other NOVACAP literature, or consult the factory.
102K 2000V
102K 2000V
103K 1000V
103K 5000V
102K 2000V
123M 7000V
274M 3000V
SIZE
W MAX. H MAX. T MAX. S +/- .030
1515
.250 (6.35) .250 (6.35) .200 (5.08) .170 (4.32)
2520
.400 (10.2) .350 (8.89) .250 (6.35) .280 (7.10)
3530
.500 (12.7) .450 (11.4) .350 (8.89) .380 (9.65)
4540
.600 (15.2) .550 (11.4) .400 (10.2) .480 (12.2)
5550
.700 (17.8) .650 (16.5) .400 (10.2) .580 (14.7)
6560
.800 (20.3) .750 (19.0) .400 (10.2) .680 (17.3)
7565
.900 (22.8) .850 (21.6) .500 (12.7) .780 (19.8)
MAXIMUM CAPACITANCE
3 Digit Code: See How to Order
COG 500V
E
X7R
683 563 473 333 392 122 * * * * * * *
COG
153 123 123 103 682 222 152 561 * * * * *
X7R
154 124 124 104 153 822 392 222 * * * * *
COG
333 223 153 153 123 562 392 182 821 681 471 391 *
X7R
334 274 274 224 473 223 123 562 332 222 152 102 *
COG
393 393 333 333 223 123 822 272 182 122 122 821 681
X7R
564 564 564 394 683 333 183 103 682 472 332 272 222
COG
563 563 563 563 393 183 123 392 332 222 182 152 122
X7R
105 105 824 684 104 473 273 183 103 822 682 562 392
COG
104 823 823 823 563 333 183 562 472 332 272 222 182
X7R
155 155 125 105 154 683 393 273 183 123 822 682 562
COG
184 124 104 104 683 393 333 103 562 472 472 392 332
X7R
185 185 185 125 274 124 823 563 333 223 183 153 123
472 392 392 332 222 561 * * * * * * *
600V 800V 1000V 2000V 3000V 4000V 5000V 6000V 7000V 8000V 9000V 10000V
V
O
L
T
A
G
Dimensions in inches; bracketed dimensions in millimeters.
40
COG DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
-55C to 125C 0 +/- 30 ppm/C .001 (0.1%) max @ 25C >100G or >1000F >10G or >100F 120% VDCW, or 750V*
AGING RATE: TEST PARAMETERS:
0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C 1MHZ for Capacitance <100pF
%C 0 -10 -20 -30 -40 -50 -60
TYPICAL VOLTAGE COEFFICIENT
COG
X7R DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25 C: -55C to 125C +/-15% C Max. .025 (2.5%) max @ 25C >100G or >1000F >10G or >100F 120% VDCW, or 750V*
X7R
X7R
X7R
X7R
INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
2KV
10KV 6KV 8KV
* WHICHEVER IS GREATER
AGING RATE:
< 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C
2KV
4KV
6KV
8KV
10KV
TEST PARAMETERS:
HOW TO ORDER
4540
SIZE
See Chart
B
DIELECTRIC
N = COG B = X7R
103
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros: 103 = 10,000pF
K
TOLERANCE
J = +/- 5 % K = +/- 10 % M = +/- 20 %
302
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 302 = 3000V
LE T
TERMINALS
LE = Radial Lead Conformal Coat LO = Radial Lead Uncoated
HM
W
HIGH RELIABILITY
Specify Testing
T H
.150
S
(CL)
1.25" min
22AWG (.025" Diam)
41
"ST'
CAPACITOR ASSEMBLIES
NOVACAP capacitor assemblies with low equivalent series resistance (ESR) and low equivalent series inductance (ESL) are available in dielectric characteristics COG, X7R and Y5V. These assemblies provide the highest capacitance available, based on chip designs for general purpose use. The leaded configurations safeguard the device against thermal and mechanical stresses, and include thru-hole and surface mount J and L style leads, bonded with high temperature solder. High reliability versions for Switch Mode use are described separately, (refer to the "Switch'M" Capacitor Assemblies data sheet). Other sizes and voltage ratings than indicated in the tables are available, consult NOVACAP.
LEAD CONFIGURATION AND ASSEMBLY OPTIONS
D
X
E
X
.055 +/- .010
"LL" LEADS
"LJ" LEADS
.250 min .010 .025 min .100 max .100
X
.020 =/- .002 "TL" LEADS "NN" OR "NP"
C
GENERAL PURPOSE "ST" SERIES CAPACITANCE & VOLTAGE SELECTION
DIMENSIONS - INCH (MM) SIZE
ST 1812 +/- .025 +/- .025
MAXIMUM CAPACITANCE (FULL STACK OF 6 CHIPS)
3 Digit Code: See How to Order Leads /Side
C
D
Max
E
Max
X
COG
50v 100v 200v 500v 50v
X7R
100v 200v 500v 50v
Y5V
100v
.600 .125 .210 .260 (5.33) (3.18) (6.60) (15.2) .600 .250 .210 .260 (5.33) (6.35) (6.60) (15.2) .715 .250 .250 .300 (6.35) (6.35) (7.62) (18.2) .715 .400 .400 .430 (10.2) (10.2) (10.9) (18.2) .715 .400 .480 .530 (12.2) (10.2) (13.5) (18.2) .500 .580 .630 .715 (14.7) (12.7) (16.0) (18.2) .830 .715 .650 .780 (19.8) (16.5) (21.1) (18.2)
2 3 3 4 4 5 6
184 474 564 125 155 155 335
154 334 474 125 125 125 225
124 274 334 564 684 824 155
393 475 823 106 104 106 224 276 224 336 274 396 564 826
395 825 106 226 276 336 566
225 565 685 186 226 226 476
684 155 225 335 335 565 106
226 476 566 * * * *
106 186 226 * * * *
ST 1825
ST 2225
ST 3640
ST 4540
ST 5550
ST 7565
Dimensions in inches; bracketed dimensions in millimeters.
42
COG DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: -55C to 125C 0 +/- 30 ppm/C .001(0.1%) max >100G or >1000F >10G or >100F < 200V or >100F 201-500V, 150% or 500V* 0% per decade 1KHz, 1.0 +/- 0.2 VRMS 1MHZ for Capacitance <100pF
Ohms 1.00
ESR VS. FREQUENCY
TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25C: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
0.10
0.01
AGING RATE:
0.001 0.0001 1.0 10 100 Frequency - KHz 1000
TEST PARAMETERS 25C:
X7R DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: -55C to 125C +/-15% C Max. 2.5% max @ >25V 3.5% max @ 25V >100G or >1000F >10G or >100F <200V,250% 201-500V,150% or 500V* < 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS
Typical Tantalum Typical 30F X7R MLC
TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25 C:
INSULATION RESISTANCE, 25C 125C
Ohms 10
IMPEDANCE VS. FREQUENCY
DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
AGING RATE: TEST PARAMETERS 25C:
1.0
.10
Y5V DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: -30C to 85C +22% -82% C Max. 5.0% max @ >25V 7.0% max @ 25V >10G or >100F N/A < 200V, 250% 201-500V,150% or 500V* < 2.0% per decade 1KHz, 0.5 +/- 0.2 VRMS
.01
TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25 C:
.001 .001 .01 0.1 1.0 Frequency - MHz 10
INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
Typical 30F MLC Typical 150F MLC
AGING RATE: TEST PARAMETERS 25C:
HOW TO ORDER
ST
STYLE
ST = General Purpose
3640
SIZE
See Chart
B
DIELECTRIC
N = COG B = X7R Y = Y5V
825
CAPACITANCE
Value in Picofarads Two significant figures, followed by number of zeros:
K
TOLERANCE
101
Two significant figures, followed by number of zeros: 101 = 100V
LJ
LN = LL = LJ = TL = TJ = NN = NP = Straight L Lead J Lead L Tab J Tab Nickel Pd/Ag
X
OPTION
Specify Standoff dimension (X) if less than max.
W
PACKING OPTION
W=Waffle T=Reeled
M
OPTION
M=Marked
VOLTAGE-VDCW LEAD STYLE
B = 0.10 pF C = 0.25 pF D = 0.50 pF F = +/- 1.0 % G = +/- 2.0 % H = +/- 3.0 % J = +/- 5.0 % 825= 8,200,000 pF K = +/- 10 % M= +/- 20 % (8.2m F) Z = +80% -20% P = +100% -0%
COG
43
"SWITCH'M"
CAPACITOR ASSEMBLIES
High capacitance assemblies with low equivalent series resistance (ESR) and low equivalent series inductance (ESL) are available for use in high power or high frequency applications, as replacement for tantalums and aluminum electrolytics. Uses include input and output filters in switch mode power supplies, high capacitance discharge circuits, and high temperature filtering/decoupling. The leaded configurations safeguard the device against thermal and mechanical stresses, and include thru-hole and surface mount J and L style leads, bonded with high temperature solder. Dielectric characteristics offered are COG, X7R and Y5V. The "SM" series are tested per DESC drawing 87106. Other sizes and voltage ratings than indicated in the tables are available, consult NOVACAP.
LEAD CONFIGURATION AND ASSEMBLY OPTIONS
D
X
E
X
.055 +/- .010
"LL" LEADS
"LJ" LEADS
.250 min .025 min .100 max .100
.010
X
.020 =/- .002 "TL" LEADS "NN" OR "NP"
C
`SWITCH'M SERIES (HI REL TESTED) CAPACITANCE & VOLTAGE SELECTION
DIMENSIONS - INCH (MM) SIZE
ST 1812 +/- .025 +/- .025
MAXIMUM CAPACITANCE (FULL STACK OF 6 CHIPS)
3 Digit Code: See How to Order Leads /Side
C
D
Max
E
Max
X
COG
50v 100v 200v 500v 50v
X7R
100v 200v 500v 50v
Y5V
100v
.600 .125 .210 .260 (5.33) (3.18) (6.60) (15.2) .600 .250 .210 .260 (5.33) (6.35) (6.60) (15.2) .715 .250 .250 .300 (6.35) (6.35) (7.62) (18.2) .715 .400 .400 .430 (10.2) (10.2) (10.9) (18.2) .715 .400 .480 .530 (12.2) (10.2) (13.5) (18.2) .500 .580 .630 .715 (14.7) (12.7) (16.0) (18.2) .830 .715 .650 .780 (19.8) (16.5) (21.1) (18.2)
2 3 3 4 4 5 6
184 474 564 125 155 155 335
124 334 394 105 125 125 225
104 224 334 564 684 684 125
273 395 563 106 683 106 154 276 184 336 224 396 474 826
335 685 825 226 276 276 476
185 395 475 126 126 156 276
394 824 105 684 824 475 106
226 396 566 * * * *
106 156 226 * * * *
ST 1825
ST 2225
ST 3640
ST 4540
ST 5550
ST 7565
Dimensions in inches; bracketed dimensions in millimeters.
44
COG DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: -55C to 125C 0 +/- 30 ppm/C .001(0.1%) max >100G or >1000F >10G or >100F < 200V, 250% 201-500V, 150% or 500V* 0% per decade 1KHz, 1.0 +/- 0.2 VRMS, 25C 1MHZ for Capacitance <100pF
Ohms 1.00
ESR VS. FREQUENCY
TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25C: INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
0.10
0.01
AGING RATE:
0.001 0.0001 1.0 10 100 Frequency - KHz 1000
TEST PARAMETERS 25C:
X7R DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: -55C to 125C +/-15% C Max. 2.5% max @ >25V 3.5% max @ 25V >100G or >1000F >10G or >100F <200V, 250% 201-500V,150% or 500V* < 2.0% per decade 1KHz, 1.0 +/- 0.2 VRMS
Typical Tantalum Typical 30F X7R MLC
TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25 C:
INSULATION RESISTANCE, 25C 125C
Ohms 10
IMPEDANCE VS. FREQUENCY
DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
AGING RATE: TEST PARAMETERS 25C:
1.0
.10
Y5V DIELECTRIC CHARACTERISTICS
OPERATING TEMPERATURE RANGE: -30C to 85C +22% -82% C Max. 5.0% max @ >25V 7.0% max @ 25V >10G or >100F N/A < 200V, 250% 201-500V,150% or 500V* < 2.0% per decade 1KHz, 0.5 +/- 0.2 VRMS
.01
TEMPERATURE COEFFICIENT: DISSIPATION FACTOR @ 25 C:
.001 .001 .01 0.1 1.0 Frequency - MHz 10
INSULATION RESISTANCE, 25C 125C DIELECTRIC WITHSTANDING VOLTAGE:
* WHICHEVER IS GREATER
Typical 30F MLC Typical 150F MLC
AGING RATE: TEST PARAMETERS 25C:
HOW TO ORDER
SM
STYLE
SM= Switch Mode
4540
SIZE
See Chart
B
N = COG B = X7R Y = Y5V
106
Value in Picofarads Two significant figures, followed by number of zeros: 106 = 10,000,000 pF (10.0 mF)
M
TOLERANCE
B = 0.10 pF C = 0.25 pF D = 0.50 pF F = +/- 1.0 % G = +/- 2.0 % H = +/- 3.0 % J = +/- 5.0 % K = +/- 10 % M= +/- 20 % Z = +80%-20% P = +100%-0%
201
VOLTAGE-VDCW
Two significant figures, followed by number of zeros: 201 = 200V
LJ
LEAD STYLE
LN = LL = LJ = TL = TJ = NN = NP = Straight L Lead J Lead L Tab J Tab Nickel Pd/Ag
X
OPTION
Specify Standoff dimension (X) if less than max.
W
PACKING OPTION
W=Waffle T=Reeled
M
OPTION
M=Marked
DIELECTRIC CAPACITANCE
COG
45
CHIP MARKING SYSTEM
NOVACAP chip identification marking is accomplished using an excimer laser which does not degrade the ceramic surface or induce microcracks. The marking code is based on EIA 198 two digit code which determines capacitance value. Laser marking is available for chip sizes 0805 through 2628. Other sizes require special request to determine if applicable. Ink marking is available for chips larger than 2628, or for leaded encapsulated devices. Marking is an option, specify using the letter M in the part number code, as shown below. MARKING CODE Value in picofarads for alpha-numeric code
LETTER
A5
Two position alpha numeric marking is available on chip sizes 0805 through 2628. The marking denotes retma value and significant figures of capacitance (see table) eg: A5 = 100,000 pF
0
A B C D E F G H J K L M N P Q R S T U V W X Y Z a b d e f m n t y 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 2.5 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0
1
10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 25 35 40 45 50 60 70 80 90
2
100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 250 350 400 450 500 600 700 800 900
3
1,000 1,100 1,200 1,300 1,500 1,600 1,800 2,000 2,200 2,400 2,700 3,000 3,300 3,600 3,900 4,300 4,700 5,100 5,600 6,200 6,800 7,500 8,200 9,100 2,500 3,500 4,000 4,500 5,000 6,000 7,000 8,000 9,000
4
10,000 11,000 12,000 13,000 15,000 16,000 18,000 20,000 22,000 24,000 27,000 30,000 33,000 36,000 39,000 43,000 47,000 51,000 56,000 62,000 68,000 75,000 82,000 91,000 25,000 35,000 40,000 45,000 50,000 60,000 70,000 80,000 90,000
5
100,000 110,000 120,000 130,000 150,000 160,000 180,000 200,000 220,000 240,000 270,000 300,000 330,000 360,000 390,000 430,000 470,000 510,000 560,000 620,000 680,000 750,000 820,000 910,000 250,000 350,000 400,000 450,000 500,000 600,000 700,000 800,000 900,000
6
1,000,000 1,100,000 1,200,000 1,300,000 1,500,000 1,600,000 1,800,000 2,000,000 2,200,000 2,400,000 2,700,000 3,000,000 3,300,000 3,600,000 3,900,000 4,300,000 4,700,000 5,100,000 5,600,000 6,200,000 6,800,000 7,500,000 8,200,000 9,100,000 2,500,000 3,500,000 4,000,000 4,500,000 5,000,000 6,000,000 7,000,000 8,000,000 9,000,000
7
10,000,000 11,000,000 12,000,000 13,000,000 15,000,000 16,000,000 18,000,000 20,000,000 22,000,000 24,000,000 27,000,000 30,000,000 33,000,000 36,000,000 39,000,000 43,000,000 47,000,000 51,000,000 56,000,000 62,000,000 68,000,000 75,000,000 82,000,000 91,000,000 25,000,000 35,000,000 40,000,000 45,000,000 50,000,000 60,000,000 70,000,000 80,000,000 90,000,000
NA5
Three position alpha numeric marking is available on chip sizes 1206 and larger, denoting NOVACAP as vendor (N), followed by the standard two digit alpha numeric identification.
"9" in the marking code denotes 0.1 multiplier for values under 1.0 pF. eg: "f9"=0.5pF
HOW TO ORDER
1210
SIZE
B
DIELECTRIC
104
CAPACITANCE
M
TOLERANCE
250
VOLTAGE
N
TERMINATION
X
THICKNESS OPTION
T
PACKING OPTION
M
MARKING OPTION
"9" in the marking code denotes 0.1 multiplier for values under 1.0 pF. eg: "f9" = 0.5 pF
46
TAPE & REEL SYSTEM
NOVACAP chip capacitors are available packaged in 8mm to 24mm embossed carrier, per EIA RS 481. Specify the reeled option (T) in the NOVACAP part number code. Chips are also supplied in bulk or waffle pack.
UNITS PER REEL (TYPICAL)
Feed Direction
3.5 +/-.05
1.75 +/-.05
CHIP SIZE
0402 0504 0603 0805 1005
TAPE WIDTH
8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm 16 mm 16 mm 16 mm 16 mm
UNITS PER REEL* 7" Diam. 13" Diam.
3000-4000 3000-4000 3000-4000 3000-4000 2000-4000 2000-4000 2000-3000 2000-3000 2000-3000 1000 1000 1000 1000 * * * * 15000 15000 15000 15000 15000 15000 10000 10000 10000 10000 5000 5000 5000 1000 1000 1000 1000
4.00 +/-.10
1206
4.00 +/-.10
1210 1505
1.5 +0.1 -0.0
1808 1812 1825 2221
Embossment 3.8 x 3.2mm maximum Cover Tape .05 Thick 8.0 +/- 0.2
2225 2628 3333 3530
0.3 Max. 2.0 Max.
4040
Dimensions for 8mm tape. Dimensions with max. tolorance are dependent on component size.
Quantity per reel varies with chip thickness. Thicker chips (typically higher capacitance values) will result in lesser quantities.
HOW TO ORDER
1210
SIZE
B
DIELECTRIC
104
CAPACITANCE
M
TOLERANCE
250
VOLTAGE
N
TERMINATION
X
THICKNESS OPTION
T
PACKING OPTION
M
MARKING OPTION
"9" in the marking code denotes 0.1 multiplier for values under 1.0 pF. eg: "f9" = 0.5 pF
47
NOVACAP FACILITIES
CORPORATE HEADQUARTERS
25136 ANZA DRIVE
VALENCIA, CALIFORNIA
25018 AVENUE KEARNY VALENCIA, CALIFORNIA
25111 ANZA DRIVE VALENCIA, CALIFORNIA
25136 ANZA DRIVE
VALENCIA,
CA
91355
OFFICE FAX
661*295*5920 661*295*5928
WEBSITE E*MAIL
www.novacap.com info@novacap.com
CATALOG 11-00-PC

▲Up To Search▲

Price & Availability of 1210B104XXX

	To Download 1210B104XXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .