View MTN2306AN3_4961815.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CYStech Electronics Corp.
30V N-CHANNEL Enhancement Mode MOSFET
Spec. No. : C429N3 Issued Date : 2008.08.14 Revised Date :2009.02.09 Page No. : 1/ 7
MTN2306AN3
Features
* VDS=30V RDS(ON)=35m@VGS=4.5V, ID=5A RDS(ON)=50m@VGS=2.5V, ID=2.6A * Low on-resistance * Low gate charge * Excellent thermal and electrical capabilities * Pb-free package
Equivalent Circuit
MTN2306AN3
Outline
SOT-23 D
GGate SSource DDrain
G
S
Absolute Maximum Ratings (Ta=25C)
Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current @ TA=25C, VGS=4.5V (Note 3) Continuous Drain Current @ TA=70C, VGS=4.5V (Note 3) Pulsed Drain Current (Note 1, 2) Maximum Power Dissipation @ TA=25 Linear Derating Factor Thermal Resistance, Junction-to-Ambient (Note 3) Operating Junction and Storage Temperature
Symbol
VDS VGS ID ID IDM PD Rth,ja Tj, Tstg
Limits 30 12 5 4 20 1.38 0.01 90 -55~+150
Unit V V A A A W W/C C/W C
Note : 1. Pulse width limited by maximum junction temperature. 2. Pulse width 300s, duty cycle2%. 3. Surface mounted on 1 in copper pad of FR-4 board; 270C/W when mounted on minimum copper pad.
MTN2306AN3 CYStek Product Specification
CYStech Electronics Corp.
Electrical Characteristics (Tj=25C, unless otherwise specified)
Symbol Static BVDSS BVDSS/Tj VGS(th) GFS IGSS IDSS Min. 30 0.5 Typ. 0.1 13 660 90 70 6 20 20 3 8.5 1.5 3.2 14 7 Max. 1.2 100 1 25 30 35 50 110 1050 15 1.2 Unit V V/C V S nA A A m
Spec. No. : C429N3 Issued Date : 2008.08.14 Revised Date :2009.02.09 Page No. : 2/ 7
Test Conditions VGS=0, ID=250A Reference to 25C, ID=1mA VDS=VGS, ID=250A VDS=5V, ID=5A VGS=12V, VDS=0 VDS=30V, VGS=0 VDS=24V, VGS=0, Tj=70C VGS=10V, ID=5A VGS=4.5V, ID=5A VGS=2.5V, ID=2.6A VGS=1.8V, ID=1A
*RDS(ON) Dynamic Ciss Coss Crss *td(ON) *tr *td(OFF) *tf *Qg *Qgs *Qgd Source-Drain Diode *VSD *trr *Qrr
pF
VDS=25V, VGS=0, f=1MHz VDS=15V, ID=5A, VGS=10V, RG=3.3, RD=3
ns
nC
VDS=16V, ID=5A, VGS=4.5V
V ns nC
VGS=0V, IS=1.2A IS=5A, VGS=0V, dI/dt=100A/s
*Pulse Test : Pulse Width 300s, Duty Cycle2%
Ordering Information
Device MTN2306AN3 Package SOT-23 (Pb-free) Shipping 3000 pcs / Tape & Reel Marking 2306A
MTN2306AN3
CYStek Product Specification
CYStech Electronics Corp.
Characteristic Curves
Spec. No. : C429N3 Issued Date : 2008.08.14 Revised Date :2009.02.09 Page No. : 3/ 7
MTN2306AN3
CYStek Product Specification
CYStech Electronics Corp.
Characteristic Curves(Cont.)
Spec. No. : C429N3 Issued Date : 2008.08.14 Revised Date :2009.02.09 Page No. : 4/ 7
MTN2306AN3
CYStek Product Specification
CYStech Electronics Corp.
Reel Dimension
Spec. No. : C429N3 Issued Date : 2008.08.14 Revised Date :2009.02.09 Page No. : 5/ 7
Carrier Tape Dimension
MTN2306AN3
CYStek Product Specification
CYStech Electronics Corp.
Recommended temperature profile for IR reflow
Spec. No. : C429N3 Issued Date : 2008.08.14 Revised Date :2009.02.09 Page No. : 6/ 7
Note : All temperatures refer to topside of the package, measured on the package body surface.
Profile feature Average ramp-up rate (Tsmax to Tp) Preheat -Temperature Min(TS min) -Temperature Max(TS max) -Time(ts min to ts max) Time maintained above: -Temperature (TL) - Time (tL) Peak Temperature(TP) Time within 5C of actual peak temperature(tp) Ramp down rate Time 25 C to peak temperature
Sn-Pb eutectic Assembly 3C/second max. 100C 150C 60-120 seconds 183C 60-150 seconds 240 +0/-5 C 10-30 seconds 6C/second max. 6 minutes max.
Pb-free Assembly 3C/second max. 150C 200C 60-180 seconds 217C 60-150 seconds 260 +0/-5 C 20-40 seconds 6C/second max. 8 minutes max.
Recommended wave soldering condition
Product Pb-free devices Peak Temperature 260 +0/-5 C Soldering Time 5 +1/-1 seconds
MTN2306AN3
CYStek Product Specification
CYStech Electronics Corp.
SOT-23 Dimension
Spec. No. : C429N3 Issued Date : 2008.08.14 Revised Date :2009.02.09 Page No. : 7/ 7
A L 3 B 1 2 S
Marking:
TE 2306A
V
G
3-Lead SOT-23 Plastic Surface Mounted Package CYStek Package Code: N3 Style: Pin 1.Gate 2.Source 3.Drain
C D K
H
J
*: Typical
DIM A B C D G H
Inches Min. Max. 0.1102 0.1204 0.0472 0.0630 0.0335 0.0512 0.0118 0.0197 0.0669 0.0910 0.0005 0.0040
Millimeters Min. Max. 2.80 3.04 1.20 1.60 0.89 1.30 0.30 0.50 1.70 2.30 0.013 0.10
DIM J K L S V
Inches Min. Max. 0.0034 0.0070 0.0128 0.0266 0.0335 0.0453 0.0830 0.1083 0.0098 0.0256
Millimeters Min. Max. 0.085 0.177 0.32 0.67 0.85 1.15 2.10 2.75 0.25 0.65
Notes: 1.Controlling dimension: millimeters.
2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office.
Material:
* Lead: 42 Alloy ; tin plating * Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0
Important Notice:
* All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. * CYStek reserves the right to make changes to its products without notice. * CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. * CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
MTN2306AN3
CYStek Product Specification

▲Up To Search▲

Price & Availability of MTN2306AN3

	To Download MTN2306AN3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .