 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| H G F E D C B A 46,1 max. 20,9 max. 1,5 PCB hole pattern edge of daugther card for reference only F F 18,65 n1 ,7 +0 - 0 ,1 24,5 0,05 (2x ) 22x suggested hole size 13,4 0,05 n2,65 + 0,1 -0 6 0,05 2 0,05 (2x) 41,3 max. 6,6 0,05 3,9 0,05 2,2 0,05 12,47 0,05 E Marking on opposite side (see note 6) 12,47 0,05 14,72 4,5 0,05 A 4,5 0,05 24,08 E 33 b 13 b 6,6 0,05 3,9 0,05 2,2 0,05 B 3 0,05 9,4 0,05 13,7 0,05 10 0,05 12 0,05 14,5 0,05 Drilled hole D 17,5 max. 28,6 max. Contact 27 datum plane 4,95 8x suggested hole size 18,5 0,05 12 11 21,2 0,05 22,55 0,05 Drilled hole 4 D 5 10 1 9 n1,15 0,025 (22x) Copper thickness minimum 25m 23,9 0,05 Contact 27 datum plane n1,75 0,025 (8x) Copper thickness minimum 25m 2 7 Tin thickness minimum 15m Tin thickness minimum 15m C Finished hole + 0,09 n1 - 0,06 (22x) Finished hole + 0,09 n1,6 - 0,06 (8x) C NOTES: 1. MATERIALS AND FINISHES: 3 8 6 13 A ( 10 : 1 ) B ( 10 : 1 ) - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 - CONTACTS: COPPER ALLOY, PLATING MATING AREA: 0,8 M GOLD OVER NICKEL PLATING TERMINATION AREA: 0,8-1,5 M TIN (SN 100) 2. ELECTRICAL CHARACTERISTICS: CREEPING AND CLEARANCE DISTANCE; MINIMUM SPACING: - CONTACTS 5-16 TO ANY OTHER CONTACT WITHIN THIS GROUP: 0,7 MM - CONTACTS 17-24 TO ANY OTHER CONTACT WITHIN THIS GROUP: 2,5 MM B - CONTACT 25 TO 26: 5,5 MM - CONTACTS 27-34 TO ANY OTHER CONTACT WITHIN THIS GROUP: 1,4 MM - CONTACTS 13-16 TO 17-20: 3,0 MM - CONTACTS 21-24 TO 25-26: 4,0 MM - CONTACTS 25-26 TO 27-29: 2,0 MM CONTACT CURRENT RATING: - POWER CONTACTS: 16 AMPERES MINIMUM, TESTED PER CSA C22.2 NO. 182.3-M1987, ALL CONTACTS UNDER LOAD - SIGNAL CONTACTS: 2 AMPERES NOMINAL INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: - POWER CONTACTS: 0,0022 OHM MAX. - SIGNAL CONTACTS: 0,0085 OHM MAX. INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A 1 5 3 2 2 2 3 5 3 1 3 1 1 quantity Fixing plate Signal contact type 7 Signal contact type 6 Signal contact type 5 Signal contact type 4 Signal contact type 3 Signal contact type 2 Signal contact type 1 Power contact type 4 Power contact type 3 Power contact type 2 Power contact type 1 Case 34pos. male part description partlist DO NOT ALTER CAD DRAWING BY HAND 13 12 11 10 9 8 7 6 5 4 3 2 1 item tolerance B dwg no. / norm material 2,5:1 (10:1) see notes THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH finish: see notes ISO 2768-m date drawn 22.08.05 appd. norm d-old dim. in mm name scale: material: title: Mankopf Kuhle MALE CONNECTOR 30pos. PRESS-FIT ANGLED AdvancedTCA A 22.08.05 A 3. POSITIONS WITHOUT CONTACTS: 1, 2, 3, 4 4. WORKING TEMPERATURE: -55C TO +125C 5. PRESS-FIT PART OF CONTACTS ARE PATENT PROTECTED 6. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC H G F E D dwg no: R Inventor 2xb A 2592 23.10.06 HS 46K2A005 part no: A DINA2 sh: 1 rev. description date name B ATC30W08MAE1S5X C |
Price & Availability of ATC30W08MAE1S5X
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |