 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| High Reliability Surface Mount LVCMOS Clock Oscillator Series Description CW 3 XH7 The Connor-Winfield's 150.0 23 MHz XH7xx and Xh9xx, High Reliability Series are 5x7.5mm Surface Mount, Fixed Frequency Crystal Controlled Oscillators (XO). Designed for applications requiring tight frequency stability over a wide temperature range, operating at 2.5V or 3.3V supply voltage, the XH7xx and XH9xx series provides a LVCMOS Output with enable / disable function. 083 Features: Model XH7xx - XH9xx Series Pure SpectrumTM Technology 5.0 x7.0mm Surface Mount Package Supply Voltages: 2.5V or 3.3V LVCMOS Output Logic Frequency Stabilities: +/-50ppm / +/-100ppm Temperature Ranges: -55 to 125C / -55 to 85C Low Jitter <1pS RMS Sub-harmonics / Spurious: -70 dBc Minimal Frequency Perturbations: 3ppm Max. Guaranteed Proper Frequency Startup. Gold Plated Terminations 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 RoHS Compliant / Lead Free. Model Specifications Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vcc) Units -55 -0.5 Minimum Nominal - Maximum 125 5.0 UNITS C Vdc Note Operating Specifications Parameter Frequency Range Total Frequency Tolerance Models XH72x, XH92x Models XH73x, XH93x Operating Temperature Range Models XH7xx, XH7xx Models XH9xx, XH9xx Supply Voltage Models XH7x2, XH9x2 Models XH7x3, XH9x3 Supply Current 40 to 79.999 MHz 80 to 89.999 MHz 90 to 124.999 MHz 125 to 164.999 MHz 165 to 225 MHz (Icc) 20 30 40 50 65 mA mA mA mA mA (Vcc) 2.375 3.135 2.500 3.300 2.625 3.465 Vdc Vdc -55 -55 125 85 C C -50 -100 50 100 ppm ppm 1 1 (Fo) Minimum 40 Nominal Maximum 200 UNITS MHz Note Input Characteristics Parameter Enable Voltage Disable Voltage Enable Time Disable Time Output Disable Current (Standby Current) (Icc) (High) (Low) (Vih) (Vil) Minimum 0.7Vcc Nominal Maximum 0.3Vcc 2 200 10 Units Vdc Vdc ms ns uA Note 2 2 LVCMOS Output Characteristics Parameter LOAD Voltage Current (High) (Low) (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% Start-Up Time Period Jitter Phase Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset (Voh) (Vol) (Ioh) (Ioh) Minimum Vcc-0.4 -8 45 Nominal Maximum 15 0.4 8 55 2 2 5 1 -70 -70 3 Units pF Vdc Vdc mA mA % ns ms ps RMS ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc dBc ppm 4 3 Note 50 1 3 0.5 -60 -90 -125 -140 -145 - Bulletin Page Revision Date Sm127 1 of 2 01 15 Sep 2008 Sub-harmonics Spurious Frequency Perturbations over Temperature Package Characteristics Package Package Terminations Hermetically sealed ceramic package and metal cover. Solder pads are Au plated, thickness 0.30 to 1.00 Micron. Specifications subject to change without notice. All dimensions in inches. (c) Copyright 2008 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Notes 1) Inclusive of calibration @ 25C, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2) When the oscillator is disabled, the outputs are at high impedance. Output is enabled with no connection on pad 1. 3) Oscillator is guaranteed to start at the specified frequency (Fo) under all conditions. 4) This part will not exhibit frequency jumps of more than 3ppm when tested every 2C within the operating temperature range, specified supply voltage and load. Ordering Information Package Outline .197 (5.00mm) .060 (1.50mm) Maximum .275 (7.00mm) XH Type: High Reliability Clock LVCMOS Series 5x7mm 7 Temperature Range: 7 = -55 to 125 C 9 = -55 to 85 C 2 Frequency Stability: 2 = +/-50 ppm 3 = +/-100 ppm 3 Supply Voltage: 2 = 2.5Vdc. 3 = 3.3Vdc. - 150.0M Output Frequency: Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHz Suggested Pad Layout Example: To order an XH723 with an output frequency of: XH723-150.0M = High Reliability, 5x7mm, LVCMOS Clock, 40 MHz = XH723-040.0M -55 to 125C,+/-50ppm, 3.3Vdc, Output Frequency 150MHz 74.25 MHz = XH723-074.25M 155.52 MHz = XH723-155.52M Environmental Characteristics Vibration: Shock: Soldering: Sollderability Vibration per Mil Std 883E Method 2007.3 Test Condition A Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. RoHS compliant, lead free. See solder profile. Sollderability per Mil Std 883E Method 2003 Solder Profile Pad Connections - Enable / Disable Function Pad 1 2 3 4 Connection Enable/Disable Ground Output Vcc Enable / Disable Function (Pad 1) High or Open Low Output Enable Disable (High Impedance) CW 0833 XH723 150.0M Temperature 260C 220C 180C 150C 120C 260C Model Matrix Frequency Tolerance 50ppm XH722 XH723 XH922 XH923 Frequency Tolerance 100ppm XH732 XH733 XH932 XH933 0 Supply Voltage 2.5Vdc 3.3Vdc 2.5Vdc 3.3Vdc Temperature Range -55 to 125C -55 to 125C -55 to 85C -55 to 85C 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. LVCMOS Output Waveform Tape and Reel Specifications 90% 50% 10% 1 US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Specifications subject to change without notice. All dimensions in inches. (c) Copyright 2008 The Connor-Winfield Corporation SM127 2 of 2 01 15 Sep 2008 |
Price & Availability of XH722-1500M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |