|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MA4P7446F-1091T Non Magnetic SMQ MELF PIN Diode Features Non-Magnetic Package Suitable for MRI Applications Rectangular MELF SMQ Ceramic Package Hermetically Sealed Low Rs for Low Series Loss Long L for Lower Intermodulation Distortion Low Cj for High Series Isolation High Average Incident Power Handling RoHS Compliant V3 Description The MA4P7446F-1091T is a surface mountable PIN diode in a non-magnetic, Metal Electrode Leadless Faced (MELF) package. The device incorporates M/A-COM Technology Solutions time proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. Incorporated in the package is a hard glass passivated, CERMACHIPTM PIN chip that is full face bonded on both the cathode and anode to maximize surface area for the lowest electrical and thermal resistance. The package utilizes a non-magnetic plating process that provides for a package with extremely low permeability. The MA4P7446F-1091T has been comprehensively characterized both electrically and mechanically to ensure repeatable and predictable performance. The non-magnetic MA4P7446F-1091T is the electrical equivalent of its magnetic counterpart the MA4P4006F-1091T. Designed for Automated Assembly These SMQ PIN diodes are designed for high volume tape and reel assembly. The rectangular package design provides for highly efficient automatic pick and place assembly techniques. The parallel flat surfaces are suitable for key jaw or vacuum pickup techniques. All solderable surfaces are tin plated and compatible with industry standard reflow and vapor phase soldering methods. Absolute Maximum Ratings1 @ 25C Parameter Operating Temperature Storage Temperature Diode Junction Temperature Diode Mounting Temperature RF C.W. Incident Power Forward D.C. Current Reverse D.C. Voltage @ -10 uA Absolute Maximum -65C to +125C -65C to +150C +175 C Continuous +235C for 10 seconds + 57dBm C.W. +500 mA - 600V Applications This diode is well suited for use in low loss, low distortion, high power switching circuits and can be used in high magnetic field environments at HF through UHF frequencies. The low thermal resistance of this device provides excellent performance at high RF power incident levels, up to 500 watts CW. This device is designed to meet the most demanding electrical and mechanical MRI environments. 1. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7446F-1091T Non Magnetic SMQ MELF PIN Diode Electrical Specifications @ TAMBIENT = +25C Parameter Forward Voltage Reverse Voltage Total Capacitance Series Resistance Parallel Resistance Carrier Lifetime I-Region Length C.W. Thermal Resistance Power Dissipation in Free Air Power Dissipation V3 Symbol VF VR CT RS RP Condition IF = +100mA IR = -1A -100V @ 1MHz +100mA @ 100MHz -10V @ 100MHz IF = +6mA , IR = -10mA (50% - 90% Voltage) ---- IHIGH = 1A, ILOW = 10mA, T = 1mS IF = +100mA IF = +100mA Unit Value 1.0 VDC (Max.) 600VDC (Min.) 2.2pF (Max.) 0.5 (Max) 10K (Min.) 19s (Typ.) 175M (Typ.) 6C/W (Max.) 8W (Max.) 25W (Max.) tL M W PDISS Environmental Capability MELF devices are appropriate for use in industrial and military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet. MIL-STD-750 Test High Temperature Storage Temperature Shock HTRB Moisture Resistance Gross Leak Vibration Fatigue Solderability 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Method 1031 1051 1038 1021 1071 Cond. E 2046 2026 Description +150C, for 340 Hours -65C to +150C, 20 Cycles 80% of rated VB, +150C, for 96 Hours No Initial Conditioning, 85% RH, +85C Dye Penetrant Visual 20,000G's, 60Hz, x, y, z axis Test Temperature = +245C MA4P7446F-1091T Non Magnetic SMQ MELF PIN Diode Typical Electrical Performance @ +25C MA4P7446F-1091T Rs vs I 1000 V3 100 MHz 100 RS () 10 Rs (Ohms) 0.01 1000 MHz 1 0.1 0.10 1.00 I ( mA ) 10.00 100.00 MAP7446F-1091T Rp vs Voltage 10000 RP () Rp_1500 MHz 1000 1.0 10.0 Voltage ( V ) 100.0 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7446F-1091T Non Magnetic SMQ MELF PIN Diode Typical Electrical Performance @ +25C MA4P7446F-1072T Ct vs Voltage 10.00 V3 CT (pF) Ct_1500 MHz Ct_100 MHz 1.00 1.0 10.0 Voltage ( V ) 100.0 MA4P7446F-1091T Ls vs Frequency 1 Ls_50 mA LS (nH) 0.1 100.0 F ( MHz ) 1000.0 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7446F-1091T Non Magnetic SMQ MELF PIN Diode Typical Magnetic vs. Non-Magnetic Performance Magnetic Moment for MA4P7400F-1091T Non-Magnetic Series vs. Comparison of Magnetic Moment for MA4P7400F-1091T Non-Magnetic & MA4P4001F-1091T Series MA4P4000F-1091T Magnetic Devices 1.5E-01 V3 Device Magnetic Moment (EMU) 1.0E-01 5.0E-02 MA4P4001F-1091T Magnetic 0.0E+00 MA4P7400F-1091T Non-Magnetic Series -5.0E-02 -1.0E-01 -1.5E-01 -1.0E+04 -8.0E+03 -6.0E+03 -4.0E+03 -2.0E+03 0.0E+00 2.0E+03 4.0E+03 6.0E+03 8.0E+03 1.0E+04 H Field ( Oersteads ) Typical Magnetic Properties of Non-Magnetic MA4P7400F-1091T Series vs. Conventional MA4P4000F-1091T Magnetic Series Magnetic Property MA4P7400F-1091T Series Value MA4P4000-1091T Series Value Saturation Moment (EMU) @ H = HMAX Oersteads Remanance Moment (EMU) @ H = 0 Oersteads Coercivity (Oersteads) @ EMU = 0 Moment 5 1.0 x E-3 1.5 x E-6 3.0 1.2 x E-1 3.4 x E-2 51.3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P7446F-1091T Non Magnetic SMQ MELF PIN Diode Mechanical Information 1091 MELF Surface Mount Package Circuit Pad Layout for MELF Diodes V3 A B C B Case Style Dimensions in Inches (mm) A Square Min / Max B Min / Max 0.180 / 0.200 (4.57/ 5.08) C Min / Max 0.008 / 0.030 (.203 / .762) Dimension Package Style 1091 inches mm 3.81 1.27 2.54 1091 0.138 / 0.155 (3.50/ 3.94) A B C 0.150 0.050 0.100 MELF Assembly Recommendations Devices may be soldered using standard 60Sn/40Pb or RoHS compliant solders. Axial leads and solderable surfaces of MELF devices are tin plated 50 M thick to ensure an optimum connection. For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM website. Ordering Information Part Number MA4P7446F-1091T Package Tape and Reel Quantity 500pcs/Reel 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MA4P7446F-1091T |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |