![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
www..com Preliminary Product Information ISSUE Date : 2005-01-17 MODEL : LTV350QV-F04 Note : The Product and specifications are subject to change without any notice. Please ask for the latest Product Standards to guarantee the satisfaction of your product requirements. PREPARED BY : LCD Mobile Display Development Samsung Electronics Co. , LTD. Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary Contents Revision History General Description 1. Absolute Maximum Ratings 1.1 Absolute Ratings Of Environment 1.2 Electrical Absolute Ratings --------------------------- (4) --------------------------- (5) --------------------------- (6) 2. Optical Characteristics 3. Electrical Characteristics 3.1 TFT-LCD Module 3.2 Back-light Unit --------------------------- (8) ------------------------- (12) 4. Block Diagram 4.1 TFT-LCD Module with Back Light Unit ------------------------- (14) ------------------------- (15) 5. Input Terminal Pin Assignment 5.1 Input Signal & Power 5.2 Input Signal, Basic Display Colors and Gray Scale of Each Colors 6. Operation Specifications 6.1 6.2 6.3 6.4 Serial Peripheral Interface Data Format for 24bit RGB Interface 24bit RGB Interface Timing Electrical Specifications ------------------------- (17) 7. Command List & Instruction Descriptions 7.1 Command List 7.2 Instruction Descriptions -------------------------- (23) 8. Reset 9. Power On/Off Sequence 9.1 Power On Sequence 9.2 Power Off Sequence -------------------------- (23) -------------------------- (24) 10. Part List of Components 10.1 Panel, Driver IC 10.2 FPC Circuit Drawing -------------------------- (27) 11. 12. 13. 14. 15. Reliability Test Result Outline Dimension Packing Marking & Others General Precaution 15.1 Handling 15.2 Storage ------------------------------------------------------------------------------------------------------------------------------ (28) (30) (31) (32) (33) Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 15.3 Operation 15.4 Others Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary Revision History Date Jan. 17. 2004 Rev. No. 000 Page Rev.000 was issued. Summary Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary General Description * Description LTV350QV-F04 is a TMR(Transmissive with Micro Reflective) type color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching devices. This model is composed of a TFT-LCD module, a driver circuit and a back-light unit. The resolution of a 3.5" contains 320RGBx240 dots and can display up to 16.7M colors. * Features - Transmissive with Micro Reflective type and back-light with six LEDs are available. - Visible in outdoor & back-light off condition with reflectivity. - TN(Twisted Nematic) mode. - Line inversion mode with stripe type. - 24bit RGB Interface + Serial Peripheral Interface(SPI) - DE(Data Enable, Dotclk) mode, SYNC(Vsync, Hsync, Dotclk) mode - Gate Driver IC embeded on Panel(Double ASG) * Applications - Display terminals for DSC(Digital Still Camera), PMP(Portable Multimedia Player) application products. * General information Items Display area Driver element Display colors Number of pixels Pixel arrangement Pixel pitch Display mode Viewing direction * Mechanical information Item Module size Horizontal(H) Vertical(V) Depth(D) Weight Min. 76.70 63.70 2.85 Typ. 76.90 63.90 3.20 31.75 Max. 77.10 64.10 3.25 Unit mm mm mm g Note (1) (1) Specification 70.08(H) x 52.56(V) a-Si TFT active matrix 16.7M 320RGB(H) x 240(V) stripe type 0.219(H) x 0.219(V) Normally White 6 Unit mm colors dot mm o'clock Note - Note (1) Not include FPC Refer to the Outline Dimension in the "12.Outline Dimension" for further information. Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 1. Absolute Maximum Ratings 1.1 Absolute Ratings of Environment Item Storage temperature Operating temperature (Ambient temperature) Symbol TSTG TOPR Min. -30 -20 Max. 70 60 Unit Note (1) (1),(2) Note (1) 95 % RH Max. ( 40 C Ta ) Maximum wet-bulb temperature at 39 C or less. (Ta > 40 C) No condensation. (2) In case of below 0, the response time of liquid crystal (LC) becomes slower and the color of panel becomes darker than normal one. Level of retardation depends on temperature, because of LC's characteristics. Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 1.2 Electrical Absolute Ratings (1) TFT-LCD Module (Ta = 25 2 C, VSS=GND=0) Characteristics Digital supply voltage Analog supply voltage Gate On voltage Gate Off voltage Symbol VCC DDVDH VGH VGL Min. -0.3 -0.3 -0.3 -18.5 Max. 4.3 6.0 22.0 0.3 Unit V V V V Note - (2) Back-Light Unit (Ta = 25 2 C) Item Current Symbol IB Min. Max. 25 Unit. mA Note (1) Note (1) Permanent damage to the device may occur if maximum values are exceeded or reverse voltage is loaded. Functional operation should be restricted to the conditions described under normal operating conditions. Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 2. Optical Characteristics The following items are measured under stable conditions. The optical characteristics should be measured in a dark room or equivalent state with the methods shown in Note (1). Measuring equipment: LCD-5000, BM-5A, BM-7, PR-650, EZ-Contrast (Ta 25 2 C, VCC = VCI = 3.3V, IB 20mA) Item Contrast ratio (Center point) Luminance of white (Center point) Response Rising:Tr Falling:Tf time White Color chromaticity (CIE 1931) Red Green Blue Hor. Ver. Symbol Condition C/R YL Tr+Tf Wx Wy Rx Ry Gx Gy Bx By L R H L NOTE (1) = 0 =0 Normal Viewing Angle B/L On Min. 150 Typ. 300 250 Max. 30 Unit cd/ msec Note (2) BM-5A (3) BM-5A (4) BM-7 - 25 0.31 0.34 0.61 0.35 0.33 0.56 0.14 0.13 60 60 50 55 - (5) PR-650 Viewing angle C/R10 B/L On Degrees (6) Ez-Contrast Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary Note (1) Test Equipment Setup After stabilizing and leaving the panel alone at a given temperature for 30 min , the measurement should be executed. Measurement should be executed in a stable, windless, and dark room. 30 min after lighting the back-light. This should be measured in the center of screen. Environment condition : Ta = 25 2 C Back-Light On condition Photodetector Photodetector BM-5A BM-7 PR-650 Field 1 1 1 BM-5A BM-7 TFT - LCD Module LCD Panel : 40 : 50 Field PR-650: 50 The center of the screen Back-Light Off condition Photodetector Light source : Halogan lamp or D65 Photodetector LCD-5000 Field 1 Reflected light LCD-5000 : 50 Incident light 30 TFT - LCD Module LCD Panel The center of the screen Optical Measuring Equipment Setup Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary Note (2) Definition of Contrast Ratio (C/R) : Ratio of gray max (Gmax) & gray min (Gmin) at the center point G max G min * Gmax : Luminance with all pixels white * Gmin : Luminance with all pixels black CR = Note (3) Definition of Luminance of White : Luminance of white at the center point Note (4) Definition of Response time : Sum of Tr ,Tf Display data White(TFT OFF) Black(TFT ON) White(TFT OFF) TR Optical Response 100% 90% 10% 0% TF Time Note (5) Definition of Color Chromaticity (CIE 1931) Color coordinate of white & red, green, blue at center point. Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary Note (7) Definition of Viewing Angle : Viewing angle range (CR10 ) Normal Line = 0o, = 0o L R L =90o x L H 12 o'clock direction H = 90o y 6 o'clock y' direction L= 90o x' R =90o Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 3. Electrical Characteristics 3.1 TFT-LCD Module Ta 25 2C Characteristics Digital supply voltage Analog supply voltage Gate On voltage Gate Off voltage Vcom High voltage Vcom Low voltage Power Full Dissipation Frame frequency Dot Clock Serial Clock Symbol VCC DDVDH VGH VGL VcomH VcomL PFULL fFrame DOTCLK SCL Min. 2.5 4.8 17.0 -11 Typ. 3.3 5.0 18.0 -10 3.65 0.35 60 Max. 3.3 5.0 19.0 -9.0 Unit V V V V Note - mW 90 30.0 16.0 Hz MHz MHz #1,#2 - 60 - 60 - * To prevent a latch-up or DC operation of the LCD module, the power on/off sequence should be as the Chapter 9. Power On/Off Sequence. Note #1. VCC = 3.3V, fFrame = 60Hz, DOTCLK = 14.4MHz - Power On : VCC - Power Off : Data VGL VGH DDVDH DDVDH VGH VGL Data VCC Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary #2. Dissipation current check pattern 0 Gray black pattern Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 3.2 Back-Light unit The back-light system is an edge-lighting type with six white LED(Light Emitting Diode)s. (Ta 25 2 C) Item Current Power Consumption Symbol IB PBL Min. - Typ. 20 440 Max. - Unit mA mW Note (1) (2) Note (1) Six LEDs serial type. (2) Where IB = 20mA, VB = PBL / IB 4. Block Diagram 4.1 TFT-LCD Module (Interface System Structure) with Back Light Unit GND C1~C6 M AVDD X6 CS VGL Y1 Connection with Host Connection with Host RESET VGH VDD DATA[23:0] ....................... Y960 G1 G3 ....................... Timing Controller Timing Controller Source Driver G2 G4 ....................... DOTCLK ENABLE VSYNC HSYNC SDI SCL LED_Anode LED_Cathode " G239 G240 Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 5. Input Terminal Pin Assignment 5.1 Input Signal & Power (Connector type : 54Pin / 0.5mm pitch / Bottom contact) - kyocera elco : 6240 series I/O I I O O O I I I I I I I I I I I I I I I I I I I No 27 28 29 30 31 32 33 34 35 36 37 38 39,40 41.42 43 44,45 46 47 48 49 50,51 52 53,54 Symbol DATA15 DATA16 DATA17 DATA18 DATA19 DATA20 DATA21 DATA22 DATA23 HSYNC VSYNC DOTCLK AVDD VDD C4 VGL C3 VGH C2 C1 VCOM ENABLE GND Description Green Data(MSB) Red Data (LSB) Red Data Red Data Red Data Red Data Red Data Red Data Red Data(MSB) Horizontal Synchronous Signal Vertical Synchronous Signal Data Colck Vanalog Vdigital Stable Capacitor connection Vgoff Voltage Stable Capacitor connection Vgon Voltage Stable Capacitor connection Stable Capacitor connection VCOM Data enabling signal Ground I/O I I I I I I I I I I I I I I O I O I O O I I I No 1,2 3,4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Symbol LED_Cathode LED_Anode C6 C5 M RESET CS SCL SDI DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 DATA8 DATA9 DATA10 DATA11 DATA12 DATA13 DATA14 Description LED_Cathode LED_Anode Stable Capacitor connection Stable Capacitor connection The signal to generate Vcom Reset Chip Select Serial Clock Serial Data Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data Blue Data Blue Data(MSB) Green Data(LSB) Green Data Green Data Green Data Green Data Green Data Green Data Note (1) Connect Hsync, Vsync pin at Vcc or GND in DE mode. (2) Connect ENABLE pin at Vcc or GND in SYNC mode. Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 5.2 Input Signal,Basic Display Colors and Gray Scale of DATA SIGNAL COLOR DISPLAY RED GREEN BLUE Each Colors GRAY SCALE LEVEL R0 R1 R2 R3~R252 R253 R254 R255 G0 G1 G2 G3~G252 G253 G254 G255 B0 B1 B2 B3~B60 B61 B62 B63 R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 BLACK BLUE GREEN BASIC COLOR CYAN RED MAGENTA YELLOW WHITE BLACK DARK 0 0 0 0 1 1 1 1 0 1 GRAY SCALE OF RED LIGHT RED BLACK DARK 0 : : 1 0 1 0 0 GRAY SCALE OF GREEN LIGHT GREEN BLACK DARK 0 : : 0 0 0 0 0 GRAY SCALE OF BLUE LIGHT BLUE 0 : : 0 0 0 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 1 : : 0 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 1 1 0 0 0 : : 0 0 0 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 0 0 1 : : 0 1 1 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 Note) Definition of Gray : Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level) Input Signal : 0 = Low level voltage, 1 = High level voltage Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 6. Operation Specifications 6.1 Serial Peripheral Interface 6.2 Data Format for 24bit RGB Interface Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 6.3 24bit RGB Interface Timing a. SYNC mode * DOTCLK = fframe = 60Hz * 3H * HBP VBP * * VLW FP (240 + VBP + VFP) (240 + VBP + VFP) (320 + HBP + HFP) (320 + HBP + HFP) Note 1. Polarity register setting : VPL = 0, HPL = 0, DPL=0 2. The rising edge of DOTCLK is used to fetch display data Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary b. DE mode Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 6.4 Electrical Specifications a. RGB Data Interface Characteristics 24bit RGB Interface Min 100 50 50 30 30 30 30 Max 2 - Characteristic DOTCLK cycle time DOTCLK rise/fall time DOTCLK Pulse width high DOTCLK Pulse width low ENABLE setup time ENABLE hold time PD data setup time PD data hold time Symbol tDCYC tR,tF tDCHW tDCLW tENS tENH tPDS tPDH Unit ns AC Characteristics(DE Mode) Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary b. Clock Synchronized Serial Mode Characteristics Characteristic Serial clock Serial clock Pulse width Pulse width Pulse width Pulse width Chip Select Chip Select Serial Serial Serial Serial cycle time rise/fall time high for write high for read low for write low for read setup time hold time Symbol tscyc tR,tF tSCHW tSCHR tSCLW tSCLR tCSS tCSH tSIDS tSIDH tSODD tSODH Min 100 30 50 30 50 20 50 30 30 5 Max 2 100 Unit ns input data setup time input data hold time output data delay time output data hold time c. Reset Timing Characteristics Characteristic Reset low pulse width Symbol tRES Min 3* Max Unit us *NOTE. Reset low pulse width shorter than 1us do not make reset. It means undesired short pulse such as glitch, bouncing noise or electorstatic discharge do not cause irregular system reset. Please refer to the table below. tRES Pulse Shorter than 1 us Longer than 3 us Between 1 us and 3 us Action No reset Reset Not determined Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary AC Characteristics(SPI Mode) AC Characteristics(RESET timing) Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 7. Command List & Instruction Descriptions 7.1 Command List Refer to the Appendix 1: S6F2002 IC Specification 7.2 Instruction Descriptions Refer to the Appendix 1: S6F2002 IC Specification 8. Reset If the /RESET input becomes "L" or the reset command is input, the each register to its default value. These default values are listed in the table below. Register Display Interface Control Display Data Control Entry Mode Gate Control 1 Gate Control 2 Display Control 1 Display Control 1 Source Output Timing Control Power Contorl 1 Power Contorl 2 Gamma Control R01 R02 R03 R04 R05 R06 R07 R08 R09 R0A R10 ~ R19 Default 001DH 0000H 0000H 0000H 0000H 50A3H 0000H 0000H 0000H 0000H 0000H Note - Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 9. Power On/Off Sequence 9.1 Power On Sequence Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary IB15 0 IB14 1 IB13 SSMD IB12 IB11 0 0 IB10 0 IB9 0 IB8 0 IB7 1 IB6 0 IB5 0 IB4 1 IB3 1 IB2 1 IB1 0 IB0 1 SSMD 0 1 Inferface SYNC mode DE mode R01H 409D 609D IB15 0 IB14 0 IB13 0 IB12 0 IB11 0 IB10 0 IB9 1 IB8 0 IB7 DF1 IB6 DF0 IB5 0 IB4 0 IB3 0 IB2 1 IB1 0 IB0 0 DF1 0 0 1 1 DF0 0 1 0 1 Data Format RGB RGBX XRGB RGB RGBX XRGB Setting Inhibited R02H 0204 0244 0284 IB15 0 IB14 0 IB13 0 IB12 0 IB11 0 IB10 0 IB9 0 IB8 IB7 IB6 IB5 IB4 IB3 IB2 IB1 IB0 VBP8 VBP7 VBP6 VBP5 VBP4 VBP3 VBP2 VBP1 VBP0 IB15 0 IB14 0 IB13 0 IB12 0 IB11 0 IB10 0 IB9 0 IB8 IB7 IB6 IB5 IB4 IB3 IB2 IB1 IB0 HBP8 HBP7 HBP6 HBP5 HBP4 HBP3 HBP2 HBP1 HBP0 Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 9.2 Power Off Sequence Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 10. Part List of Components 10.1 Panel, Driver IC UPPER SIDE BOTTOM SIDE No. 1 2 3 4 5 Part Name TFT GLASS COLOR FILTER GLASS UPPER POLARIZER LOWER POLARIZER DRIVER IC Specification T0.5 T0.5 Thin-Pol Thin-Pol S6F2002 Maker SAMSUNG CORNING SEC KORENO KORENO LDI EA 1 1 1 1 2 Note Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com www..com Preliminary 11. Reliability Test Result T.B.D. Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 12. Outline Dimension Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 13. Packing Note (1) Total : Case: Approx. TBD Kg Box: Approx. TBD Kg (2) Size : Case: 490(W) x 342(D) x 58(H) Box: 505(W) x 355(D) x 312(H) (3) Place the panels in the tray facing the direction shown in the figure. (4) Place 5 tray and cover(empty tray) and pads inside the packing-case. (5) Place 5 packing-case inside the packing-box.(Affix the label) (6) Seal the packing-box. Affix the label-safety. Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 14. Marking & Others (1) Packing case attach DEVICE TYPE QUANTTY : LTV350QV-F04 : : 40 PCS MADE IN KOREA CASE ID CASE ID : V 00 00 00001 Serial No.(00001-99999) Week Year Device Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 15. General Precautions 15.1 Handling (a) When the module is assembled, it should be attached to the system firmly. Be careful not to twist and bend the module. (b) Refrain from strong mechanical shock and / or any force to the module. In addition to damage, this may cause improper operation or damage to the module and back-light unit. (c) Note that polarizers are very fragile and could be easily damaged. Do not press or scratch the surface harder than a HB pencil lead. (d) Wipe off water droplets or oil immediately. If you leave the droplets for a long time, Staining and discoloration may occur. (e) If the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth. (f) The desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane. Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanent damage to the polarizer due to chemical reaction. (g) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, legs or clothes, it must be washed away thoroughly with soap. (h) Protect the module from static , it may cause damage to the Integrated Gate Circuit. (i) Use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (j) Do not disassemble the module. (k) Protection film for polarizer on the module shall be slowly peeled off just before use so that the electrostatic charge can be minimized. (l) Pins of I/F connector shall not be touched directly with bare hands Doc . No LTV350QV-F04 Rev.No 000 Page /34 www..com Preliminary 15.2 Storage (a) Do not leave the panel in high temperature, and high humidity for a long time. It is highly recommended to store the module with temperature from 0 to 35C and relative humidity of less than 70%. (b) Do not store the TFT-LCD module in direct sunlight. (c) The module shall be stored in a dark place. It is prohibited to apply sunlight or fluorescent light during the store. 15.3 Operation (a) Do not connect, disconnect the module in the "Power On" condition. (b) Power supply should always be turned on/off by the "Power on/off sequence" 15.4 Others (a) The Liquid crystal is deteriorated by ultraviolet, do not leave it in direct sunlight and strong ultraviolet ray for many hours. (b) Avoid condensation of water. It may result in improper operation or disconnection of electrode. (c) Do not exceed the absolute maximum rating value. ( the supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the panel may be damaged. (d) If the panel displays the same pattern continuously for a long period of time, it can be the situation when the image "Sticks" to the screen. (e) This panel has its circuitry FPC on the bottom side and should be handled carefully in order not to be stressed. Doc . No LTV350QV-F04 Rev.No 000 Page /34 |
Price & Availability of LTV350QV-F04
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |