|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Filename: tfs 456g.doc Version 1.4 14.07.2005 VI TELEFILTER Measurement condition Ambient temperature: Input power level: Terminating impedance: * Input: Output: 23 0 C dBm Filter specification TFS 456G 1/5 550 || -2,5 pF 650 || -2,3 pF Characteristics Remark: The reference level for the relative attenuation arel of the TFS 456G is the minimum of the pass band attenuation. This value is defined as the insertion loss ae. The nominal frequency fN is fixed at 456,0 MHz without any tolerance. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data Insertion loss (reference level) Nominal frequency Passband Pass band ripple Relative attenuation fN fN 1,7 1,85 MHz ... fN MHz ... fN ... ... ... ... ... fN fN fN fN fN + + + 1,7 1,85 36 96 200 200 490 arel MHz MHz MHz MHz MHz MHz MHz at fN ae = amin typ. value 8,8 0,3 dB dB tolerance / limit max. 10,0 456,0 fN 1,7 max. 1,0 dB MHz MHz dB fN 0,5 1,5 45 60 65 70 60 0,6 100 13 - dB dB dB dB dB dB dB s ns dB max. max. min. min. min. min. min. max. max. min. max. 1 3 40 50 40 30 30 3,0 250 10 10 dB dB dB dB dB dB dB s ns dB dBm fN 3,35 MHz 36 MHz fN 96 MHz fN 455 MHz fN 200 MHz fN + Absolute Group Delay Group delay ripple Return loss within PB Input power level Operating temperature range Storage temperature range Frequency inversion temperature OTR 20 C ppm/K - 40 C ... + 85C - 45 C ... + 85C - TCf ** -0,04 *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) f(Hz) = TCf(ppm/K) x (T-T0) x fcat(MHz). Generated: Checked / Approved: Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 456g.doc Version 1.4 14.07.2005 VI TELEFILTER Filter characteristic 0 -8 -16 -24 magnitude in dB Filter specification TFS 456G 2/5 0 -1 -2 -3 magnitude in dB -4 -5 -6 -7 -8 -9 424 432 440 448 456 464 frequency in MHz 472 480 488 496 2.18 2 1.82 1.64 delay in s 1.46 1.28 1.1 0.92 0.74 0.56 -32 -40 -48 -56 -64 -72 -80 416 0.38 -10 453 453.6 454.2 454.8 455.4 456 456.6 457.2 457.8 458.4 459 frequency in MHz Construction and pin connection (All dimensions in mm) S 456G T28 Date code 1 2 3 4 5 6 7 8 9 10 Ground Ground Ground Output Output Ground Ground Ground Input Input Date code: T U V ... Year + week 2005 2006 2007 200 Ohm Test circuit 10 L1 L3 L2 4 9 SAW 5 L6 L4 L5 1, 2, 3, 6, 7, 8 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 456g.doc Version 1.4 14.07.2005 VI TELEFILTER Stability characteristics Filter specification TFS 456G 3/5 After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Change of temperature: 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2 - 14 Test N reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 16,00 0,3 Po : 4,00 0,1 Do : 1,50 +0,1/-0 E : 1,75 0,1 F : 7,50 0,1 G(min) : 0,60 P2 : 2,00 0,1 P1 : 8,00 0,1 D1(min) : 1,50 Ao : 5,50 0,1 Bo : 7,50 0,1 Ct : 13,5 0,1 Date Code P1 Po P2 t Do G Ct Bo F Ko Typ PIN Marker D1 Ao W2 C A N W1 E G W Reel (all dimensions in mm) A : 330 W1 : 16,4 +2/-0 W2(max) : 22,4 N(min) : 50 C : 13,0 +0,5/-0,2 The minimum bending radius is 45 mm. Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 456g.doc Version 1.4 14.07.2005 VI TELEFILTER Air reflow temperature conditions Filter specification TFS 456G 4/5 Conditions Average ramp-up rate (30C to 217C) > 100C > 150C > 217C Peak temperature Time within 5C of actual peak temperature Cool-down rate (Peak to 50C) Time from 30C to Peak temperature Exposure less than 3C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260C between 10 and 30 seconds less than 6C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / C max. 260C 217C max. 300 s 10 ... 30 s 30 ... 150 s Time / s Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 456g.doc Version 1.4 14.07.2005 VI TELEFILTER Filter specification TFS 456G 5/5 Version 1.0 1.1 1.2 1.3 1.4 Reason of Changes - Generation of development specification - Added source and load impedance of 200 - Added maximum input power level 10 dBm limit for insertion loss changed to 10,0 dB - typical values, filter characteristic and terminating impedance added - air reflow temperature conditions modified - typical values corrected Name Strehl Strehl Pfeiffer Pfeiffer Pfeiffer Date 06.08.2004 12.08.2004 03.09.2004 01.02.2005 14.07.2005 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS456G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |