View ZNR_136370.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TOKEN ELECTRONICS IND. CO., LTD.
HONESTY PERFECTION SHARING
Catalogue of Power Resistors
www..com
Taiwan: No. 137, Sec. 1, Chung Shin Rd., Wu Ku Hsiang,Taipei Hsien,Taiwan, R.O.C TEL: 886-2-2981 0109 FAX: 886-2-2988 7487 China: 3F South, Zhongxing Industry Bld., Changye Rd., Nanshan District, Shen Zhen, Guangdong 518054 TEL: 86-755-2605 5363 FAX: 86-755-2605 5365
Contact: token@token.com.tw Support: support@tokenonline.net Homepage: 1. http://www.token.com.tw 2. http://www.tokenonline.net
TOKEN MEANS QUALITY AND SERVICE
POWER RESISTORS INDEX
DR Series Of Non-Flammable Wire-Wound Power Resistors--------------------------------------- 2
DDR Type 10W -1300W Tubular Ceramic, Fixed-Type Wire-Wound Resistor--------------------------------------DCR Type 100W -250W Tubular Ceramic, C-Shaped Wire-Wound Resistor----------------------------------------DNR Type 50W -1300W Tubular Ceramic, Low Inductive Wire-Wound Resistor-----------------------------------DSR Type 20W -1300W Tubular Ceramic, Variable Wire-Wound Resistor-------------------------------------------
2 2 3 3
DQ Series Of Non-Flammable Wave-Shape Ribbon-Wound Power Resistors ---------- 5
DQR Type 75W -2000W Tubular Ceramic, Wave-Type Wire-Wound Resistor-------------------------------------DQN Type 75W -2000W Tubular ceramic, wave, low inductive wire-wound resistor------------------------------DQS Type 75W -2000W Tubular Ceramic, Wave, Variable Wire-Wound Resistor----------------------------------
5 5 6
ZR Series Of Non-Flammable Flat Wire-Wound Power Resistors ------------------------------- 7
ZZR Type 40W -300W Flat Ceramic Form, Set-Type, Wire-Wound Resistor----------------------------------------ZQR Type 60W -450W Flat Ceramic Form, Wave-Type Wire-Wound Resistor-------------------------------------ZNR Type 40W-300W Flat Ceramic Form, Set-Type, Low Inductive Wire-Wound Resistor---------------------ZQN Type 60W-450W Flat Ceramic Form, Wave-Type, Low Inductance Resistor---------------------------------www..com
7 7 8 8
AL Series Of Large Capacity Metal-Clad Power Resistors ------------------------------------------- 9
ASQ Type High Voltage, Aluminum Encased Resistor--------------------------------------------------------------------ASH Type High Voltage, Aluminum Encased Resistor--------------------------------------------------------------------ASZ Type High Voltage, Aluminum Encased Resistor----------------------------------------------------------------------
9 10 10
VR Series Of Variable Wire-Wound Power Resistors --------------------------------------------------- 11
FVR Type 25W-100W---------------------------------------------------------------------------------------------------------------
11
ST Series Of Wire-Wound Starter Power Resistors ------------------------------------------------------ 12
DST Type 500W Tubular Ceramic, Starter Wire-Wound Resistor------------------------------------------------------DST Type 600W-1000W Tubular Ceramic, Starter Wire-Wound Resistor---------------------------------------------
12 12
SS Series Of Slide-Type Wire-Wound Power Resistors ----------------------------------------------- 13
BSR Type 200W -1300W Slide-Type Wave, Variable Wire-Wound Resistor----------------------------------------BSQ Type 300W -2000W Slide-Type Wave, Variable Wire-Wound Resistor-----------------------------------------
13 13
Assembly-Type Load Resistor Box -------------------------------------------------------------------------------- 14
BDR Type 200W-3200W High Voltage, Assembly-Type Resistance Box -------------------------------------------BQR Type 300W-4800W High Voltage, Assembly-Type Resistance Box -------------------------------------------
14 14
ALUMINUM Housed Wirewound Resistors ------------------------------------------------------------------- 15
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw Page 1/17
TOKEN MEANS QUALITY AND SERVICE
NON-FLAMMABLE WIRE-WOUND POWER RESISTORS
DR RESISTOR SERIES A tubular ceramic resistor has two terminals, and is wound with copper wire or chromium alloy wire to provide the resistance and then coated with a high temperature, non-flammable resin. After the semi-finished resistor is cool and dry, insulation is applied through a high-temperature process and the mounts are attached. Since the winding is excellent, many taps can be added, impedance is low and the r shape can be altered to produce many types of resistors. These resistors are suitable for educational modeling applications, load testing, industrial machinery, electric power distribution, instruments, automation control installations, etc. For custom specifications, please contact us to discuss the details. DDR TYPE 10W -1300W
L
DCR TYPE 100W -250W
Tubular Ceramic, C-Shaped Wire-Wound Resistor Power Dimensions (m/m) Rating A B C 100W 28 140 165 120W 28 165 190 150W 28 195 220 200W 28 254 279 250W 28 300 325
HOW TO ORDER DDR Product Type.
DDR type DCR type
1000W Rated Power.
10W~1300W 100W~250W
500 Resistance Value. ( )
J Resistance Tolerance.
J=5% K=10%
G Assembly Method.
2-8 part assembly G- Horizontal mount N- No mounts. Z- Vertical mount. Page 2/17
( ) Indicates resistance value in units of ohms.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
D
C B
D 30 30 30 30 30
A
Resistance Range ( ) 20-20 K 25-25 K 30-30 K 35-35 K 40-40 K
K
I
O
Q
P
M
J
6 6 6 6 6 6 6 6 6 6 6 8 8 8 10 10 10
CB
N
A
L 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
M
N 6 6 6 6
O 10 16 16 16 27 27 27 27 27 27 34 34 34 34 34 40 40 40 50 50 50
D
H
Tubular Ceramic, Fixed-Type Wire-Wound Resistor Power Dimensions (m/m) Rating A B C D E F G H I JK 10W 45 12 6 15 4 54 2 9 3 62 28 20W 60 17 8 22 5 78 2 12 4 90 36 30W 80 17 8 22 5 100 2 12 4 112 36 40W 110 17 8 22 5 128 2 12 4 140 36 50W 110 25 16 30 8 150 5 18 6 166 58 60W 90 28 18 32 8 130 5 19 6 146 60 80W 110 28 18 32 8 150 5 19 6 166 60 100W 140 28 18 32 8 180 5 19 6 196 60 120W 160 28 18 32 8 200 5 19 6 216 60 150W 195 28 18 32 8 235 5 19 6 251 60 160W 185 35 24 36 10 225 5 19 8 245 76 200W 210 35 24 36 10 250 5 19 8 274 76 www..com 250W 210 40 25 38 12 250 5 20 8 274 78 300W 260 40 25 38 12 300 5 20 8 320 78 400W 330 40 25 38 12 370 5 20 8 395 78 500W 330 50 35 50 12 380 6 25 9 400 100 600W 400 50 35 50 12 450 6 25 9 470 100 700W 460 50 35 50 12 510 6 25 9 530 100 800W 460 60 40 55 15 515 6 30 10 535 110 1000W 540 60 40 55 15 595 6 30 10 615 110 1300W 650 65 42 62 15 702 6 30 10 722 115
Resistance Range ( ) 1~3 K 1~7 K 1~10 K 1~13 K 0.1~25 K 0.1~30 K 0.1~40 K 0.1~50 K 0.1~60 K 0.3~75 K 0.3~80 K 0.3~100 K 0.5~125 K 0.5~150 K 0.5~200 K 0.5~250 K 0.8~300 K 0.8~350 K 0.8~400 K 1~500 K 1~750 K
E
G
TOKEN MEANS QUALITY AND SERVICE
DNR TYPE 50W -1300W
H D
D
DSR TYPE 20W -1300W
H
HOW TO ORDER DSR Product Type.
DNR type DSR type
400W Rated Power.
50W~1300W 20W~1300W
100 Resistance Value. ( )
K Resistance Tolerance.
G Assembly Method.
2-8 part assembly G- Horizontal mount N- No mounts. Z- Vertical mount.
( ) Indicates resistance value in J=5% K=10% units of ohms.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 3/17
K
O
I
N
Q
P
M
A
J F
K 36 36 36 58 60 60 60 60 60 76 76 78 78 78 100 100 100 110 110 115
L M 1.0 1.0 1.0 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 8 1.6 8 1.6 8 1.6 10 1.6 10 1.6 10
N 6 6 6
O 16 16 16 27 27 27 27 27 27 34 34 34 34 34 40 40 40 50 50 50
C
B
Tubular Ceramic, Variable Wire-Wound Resistor Power Dimensions (m/m) Rating A B C D E F GH I J 20W 60 17 8 22 5 78 2 12 4 90 30W 80 17 8 22 5 100 2 12 4 112 40W 110 17 8 22 5 128 2 12 4 140 50W 110 25 16 30 8 150 5 18 6 166 www..com 60W 90 28 18 32 8 130 5 19 6 146 80W 110 28 18 32 8 150 5 19 6 166 100W 140 28 18 32 8 180 5 19 6 196 120W 160 28 18 32 8 200 5 19 6 216 150W 195 28 18 32 8 235 5 19 6 251 160W 185 35 24 36 10 225 5 19 8 245 200W 210 35 24 36 10 250 5 19 8 274 250W 210 40 25 38 12 250 5 20 8 274 300W 260 40 25 38 12 300 5 20 8 320 400W 330 40 25 38 12 370 5 20 8 395 500W 330 50 35 50 12 380 6 25 9 400 600W 400 50 35 50 12 450 6 25 9 470 700W 460 50 35 50 12 510 6 25 9 530 800W 460 60 40 55 15 515 6 30 10 535 1000W 540 60 40 55 15 595 6 30 10 615 1300W 650 65 42 62 15 702 6 30 10 722
Resistance Range ( ) 1~1K 1~1.5K 1~2K 0.1~5K 0.1~6K 0.1~8K 0.1~10K 0.1~12K 0.3~15K 0.3~16K 0.3~20K 0.5~25K 0.5~30K 0.5~40K 0.5~50K 0.8~60K 0.8~70K 0.8~80K 1~100K 1~130K
K
L
O I
CB
Q
P
N
E
A
J F
Tubular Ceramic, Low Inductive Wire-Wound Resistor Power Dimensions (m/m) Rating A B C D E F GH I J 50W 110 25 16 30 8 150 5 18 6 166 60W 90 28 18 32 8 130 5 19 6 146 80W 110 28 18 32 8 150 5 19 6 166 100W 140 28 18 32 8 180 5 19 6 196 120W 160 28 18 32 8 200 5 19 6 216 150W 195 28 18 32 8 235 5 19 6 251 160W 185 35 24 36 10 225 5 19 8 245 200W 210 35 24 36 10 250 5 19 8 274 250W 210 40 25 38 12 250 5 20 8 274 300W 260 40 25 38 12 300 5 20 8 320 400W 330 40 25 38 12 370 5 20 8 395 500W 330 50 35 50 12 380 6 25 9 400 600W 400 50 35 50 12 450 6 25 9 470 700W 460 50 35 50 12 510 6 25 9 530 800W 460 60 40 55 15 515 6 30 10 535 1000W 540 60 40 55 15 595 6 30 10 615 1300W 650 65 42 62 15 702 6 30 10 722
K 58 60 60 60 60 60 76 76 78 78 78 100 100 100 110 110 115
L M 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 8 1.6 8 1.6 8 1.6 10 1.6 10 1.6 10
N
O 27 27 27 27 27 27 34 34 34 34 34 40 40 40 50 50 50
Resistance Range ( ) 0.1~10 K 0.1~12 K 0.1~16 K 0.1~20 K 0.1~24 K 0.3~30 K 0.3~35 K 0.3~40 K 0.5~50 K 0.5~60 K 0.5~80 K 0.5~100 K 0.8~120 K 0.8~140 K 0.8~160 K 1~200 K 1~260 K
L
E
G
G
TOKEN MEANS QUALITY AND SERVICE
PERFORMANCE SPECIFICATIONS Test Item Test Methods Resistance tolerance JIS-C-5202 5-1 Temperature coefficient Power rating load Short-term overload Insulation resistance Dielectric withstanding voltage Terminal strength Resistor strength Vibration JIS-C-5202 5-2 JIS-C-5202 5-4 Characteristics Resistance Nominal Tolerance 1>R 5% (J) 10% (K) 1R 200ppm/ C max. R/R (0.5%+0.1 ) Surface temperature up 350C max. Free of appearance or structural irregularity R/R (2%+0.1 ) min 100M Free of appearance or structural irregularity R/R (0.1%+0.05 )
Thermal shock
Humidity Load life
www..com
Flame retardation Remarks
JIS-C-5202 5-5 1000% rated power 5 seconds JIS-C-5202 5-6 500VDC JIS-C-5202 5-7 1000VDC 1 minute Between terminal and anchor stand JIS-C-5202 6-1 Free of appearance or structural irregularity 8Kg 30 seconds JIS-C-5202 6-2 Free of appearance or structural irregularity 30Kg 30 seconds JIS-C-5202 6-3 Free of appearance or structural irregularity surface 1.5m/m 10 ~ 50 ~ 10 Hz/min coating crack. R/R (1%+0.05 ) X-Y-Z 2 hours each JIS-C-5202 7-3 Resistor free of structural irregularity R/R (2%+0.1 ) Room temp. 30 minutes ON-55C 15 minutes OFF JIS-C-5202 7-5 Free of appearance or structural irregularity surface R/R (3%+0.1 ) coating crack 40C 90%RH 240 hours JIS-C-5202 7-10 Free of appearance or structural irregularity surface 90 minutes ON coating crack R/R (3%+0.1 ) 30 minutes OFF 500 hours JIS-C-5202 7-13-3-2 US UL-94 flame retardation test V-0 grade 100% - 600% rated power load noncombustible 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Resistor coating refers to UL-certified data provided by supplier.
HOW TO ORDER DNR Product Type.
DDR type DNR type DSR type DCR type
600W Rated Power.
10W~1300W 50W~1300W 20W~1300W 100W~250W
500 Resistance Value. ( )
J Resistance Tolerance.
J=5% K=10%
G Assembly Method.
2-8 part assembly G- Horizontal mount N- No mounts. Z- Vertical mount.
( )Indicates resistance value in units of ohms.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 4/17
TOKEN MEANS QUALITY AND SERVICE
NON-FLAMMABLE WAVE-SHAPE RIBBON-WOUND POWER RESISTORS
DQ RESISTOR SERIES A tubular ceramic resistor has two terminals, and is wound with a resistance element consisting of a wave-shaped alloy ribbon. A high temperature, non-flammable resin insulation is applied after cooling and drying through a high temperature process and then the component mounts are attached. The resistance value range is relatively low due to alloy material limitations; see the DR resistor series if high resistance values are required. This product supports the use of numerous taps, has is low impedance, and can be fabricated in various shapes to support a wide range of resistor applications. These +resistors are suitable for educational modeling applications, load testing, industrial machinery, electric power distribution, instruments, automation control installations, etc. For custom specifications, please contact us to discuss the details. DQR TYPE 75W -2000W
L E C B M N Q P A F J G
DQN TYPE 75W -2000W
Tubular ceramic, wave, low inductive wire-wound resistor Power Dimensions (m/m) Rating A B C D E F GH I J K 75W 110 25 16 30 8 150 5 18 6 166 58 90W 90 28 18 32 8 130 5 19 6 146 60 120W 110 28 18 32 8 150 5 19 6 166 60 150W 140 28 18 32 8 180 5 19 6 196 60 180W 160 28 18 32 8 200 5 19 6 216 60 225W 195 28 18 32 8 235 5 19 6 251 60 240W 185 35 24 36 10 225 5 19 8 245 76 300W 210 35 24 36 10 250 5 19 8 274 76 375W 210 40 25 38 12 250 5 20 8 274 78 450W 260 40 25 38 12 300 5 20 8 320 78 600W 330 40 25 38 12 370 5 20 8 395 78 750W 330 50 35 50 12 380 6 25 9 400 100 900W 400 50 35 50 12 450 6 25 9 470 100 1000W 460 50 35 50 12 510 6 25 9 530 100 1200W 460 60 40 55 15 515 6 30 10 535 110 1500W 540 60 40 55 15 595 6 30 10 615 110 2000W 650 65 42 62 15 702 6 30 10 722 115
L M 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 8 1.6 8 1.6 8 1.6 10 1.6 10 1.6 10
O 27 27 27 27 27 27 34 34 34 34 34 40 40 40 50 50 50
Resistance Range ( ) 0.1~8 0.1~9 0.1~12 0.1~15 0.1~18 0.1~23 0.1~24 0.3~30 0.3~38 0.3~45 0.3~60 0.3~75 0.3~90 0.5~100 0.5~120 0.5~150 0.5~200
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 5/17
D K
O
I
K 58 60 60 60 60 60 76 76 78 78 78 100 100 100 110 110 115
L M 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 8 1.6 8 1.6 8 1.6 10 1.6 10 1.6 10
O 27 27 27 27 27 27 34 34 34 34 34 40 40 40 50 50 50
H
Tubular Ceramic, Wave-Type Wire-Wound Resistor Power Dimensions (m/m) Rating A B C D E F GH I J 75W 110 25 16 30 8 150 5 18 6 166 90W 90 28 18 32 8 130 5 19 6 146 120W 110 28 18 32 8 150 5 19 6 166 150W 140 28 18 32 8 180 5 19 6 196 180W 160 28 18 32 8 200 5 19 6 216 225W 195 28 18 32 8 235 5 19 6 251 240W 185 35 24 36 10 225 5 19 8 245 300W 210 35 24 36 10 250 5 19 8 274 375W 210 40 25 38 12 250 5 20 8 274 260 40 25 38 12 300 5 20 8 320 www..com 450W 600W 330 40 25 38 12 370 5 20 8 395 750W 330 50 35 50 12 380 6 25 9 400 900W 400 50 35 50 12 450 6 25 9 470 1000W 460 50 35 50 12 510 6 25 9 530 1200W 460 60 40 55 15 515 6 30 10 535 1500W 540 60 40 55 15 595 6 30 10 615 2000W 650 65 42 62 15 702 6 30 10 722
Resistance Range ( ) 0.1~8 0.1~9 0.1~12 0.1~15 0.1~18 0.1~23 0.1~24 0.3~30 0.3~38 0.3~45 0.3~60 0.3~75 0.3~90 0.5~100 0.5~120 0.5~150 0.5~200
TOKEN MEANS QUALITY AND SERVICE
DQS TYPE 75W -2000W
H D K
PERFORMANCE SPECIFICATIONS Test Item Test Methods
Resistance tolerance Temperature coefficient Power rating load Short-term overload JIS-C-5202 5-1
Characteristics
Resistance Nominal Tolerance 1>R 5% (J) 10% (K) 1R 400PPM/C MAX R/R (0.5%+0.1 ) Surface temperature up 350C MAX Free of appearance or structural irregularity R/R (2%+0.1 ) 100M min. Free of appearance or structural irregularity R/R (0.1%+0.05 )
JIS-C-5202 5-2 JIS-C-5202 5-4 JIS-C-5202 5-5 500% rated power 5 seconds Insulation resistance JIS-C-5202 5-6 500VDC www..com Dielectric withstanding voltage JIS-C-5202 5-7 1000VDC 1 minute Between terminal and anchor stand Terminal strength JIS-C-5202 6-1 8Kg 30 seconds Free of appearance or structural irregularity Resistor strength JIS-C-5202 6-2 30Kg 30 seconds Free of appearance or structural irregularity Vibration JIS-C-5202 6-3 Free of appearance or structural irregularity Surface coating crack R/R (1%+0.05 ) 1.5m/m 10 ~ 50 ~ 10 Hz/min X-Y-Z 2 hours each Thermal shock JIS-C-5202 7-3 Resistor free of structural irregularity R/R (1%+0.05 ) Room temp 30 minutes ON-55C 15 minutes OFF Humidity JIS-C-5202 7-5 Free of appearance or structural irregularity Surface coating crack R/R (3%+0.1 ) 40C 90%RH 240 hours Load life JIS-C-5202 7-10 Free of appearance or structural irregularity Surface coating crack 90 minutes ON-30 minutes OFF500 R/R (5%+0.1 ) hours Flame retardation JIS-C-5202 7-13-3-2 US UL-94 flame retardation test V-0 grade noncombustible 100% - 600% rated power load Remarks 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Resistor coating refers to UL-certified data provided by supplier.
HOW TO ORDER DQS
Product Type. DQR type DQN type DQS type
2000W
Rated Power. 75W~2000W 75W~2000W 75W~2000W
32
Resistance Value. ( ( ) Indicates resistance value in units of ohms )
K
Resistance Tolerance. H=3% J=5% K=10%
G
Assembly Method. 2-8part-assembly G-Horizontal mount N-No mounts. Z-Vertical mount.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 6/17
O I
CB
Q
P
M
N
A
J F
Tubular Ceramic, Wave, Variable Wire-Wound Resistor Power Dimensions (m/m) Rating A B C D E F GH I J 75W 110 25 16 30 8 150 5 18 6 166 90W 90 28 18 32 8 130 5 19 6 146 120W 110 28 18 32 8 150 5 19 6 166 150W 140 28 18 32 8 180 5 19 6 196 180W 160 28 18 32 8 200 5 19 6 216 225W 195 28 18 32 8 235 5 19 6 251 240W 185 35 24 36 10 225 5 19 8 245 300W 210 35 24 36 10 250 5 19 8 274 375W 210 40 25 38 12 250 5 20 8 274 450W 260 40 25 38 12 300 5 20 8 320 600W 330 40 25 38 12 370 5 20 8 395 750W 330 50 35 50 12 380 6 25 9 400 900W 400 50 35 50 12 450 6 25 9 470 1000W 460 50 35 50 12 510 6 25 9 530 1200W 460 60 40 55 15 515 6 30 10 535 1500W 540 60 40 55 15 595 6 30 10 615 2000W 650 65 42 62 15 702 6 30 10 722
K 58 60 60 60 60 60 76 76 78 78 78 100 100 100 110 110 115
L M 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.2 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 6 1.6 8 1.6 8 1.6 8 1.6 10 1.6 10 1.6 10
O 27 27 27 27 27 27 34 34 34 34 34 40 40 40 50 50 50
Resistance Range ( ) 0.1~8 0.1~9 0.1~12 0.1~15 0.1~18 0.1~23 0.1~24 0.3~30 0.3~38 0.3~45 0.3~60 0.3~75 0.3~90 0.5~100 0.5~120 0.5~150 0.5~200
L
E
G
TOKEN MEANS QUALITY AND SERVICE
NON-FLAMMABLE FLAT WIRE-WOUND POWER RESISTORS
ZR RESISTOR SERIES A flat tubular ceramic has two terminals and is wound with either copper wire or chromium alloy wire as a resistant is coated with a high-temperature non-flammable resin. When cooled and dried, it is encapsulated in insulation through a high-temperature process before the final installation of the component mounts. It is mainly utilized for industrial installations where height is limited. Due to the excellent windings, many taps can be added, impedance is low, and PC board is insert able, and usable for many other integrated applications. These resistors are suitable for educational modeling applications, load testing, industrial machinery, electric power distribution, instruments, automation control installations, etc. For custom specifications, please contact us to discuss the details. ZZR TYPE 40W -300W
G
Flat Ceramic Form, Set-Type, Wire-Wound Resistor Power Dimensions (m/m) Rating A B C D E F G H I 40W 83 70 50 28 11 5.2 4.1 13 6.5 55W 123 110 90 28 11 5.2 4.1 13 6.5 70W 153 140 120 28 11 5.2 4.1 13 6.5 95W 183 170 150 28 11 5.2 4.1 13 6.5 100W 193 180 160 28 11 5.2 4.1 13 6.5 120W 218 205 185 28 11 5.2 4.1 13 9 150W 218 205 185 35 11 5.2 5.2 13 9 200W 243 230 210 35 11 5.2 5.2 13 9 250W 287 274 254 35 11 5.2 5.2 13 9 300W 333 320 300 35 11 5.2 5.2 13 9
www..com
ZQR TYPE 60W -450W
Flat Ceramic Form, Wave-Type Wire-Wound Resistor Power Dimensions (m/m) Rating A B C D E F G H I 60W 83 70 50 28 11 5.2 4.1 13 6.5 80W 123 110 90 28 11 5.2 4.1 13 6.5 100W 153 140 120 28 11 5.2 4.1 13 6.5 140W 183 170 150 28 11 5.2 4.1 13 6.5 150W 193 180 160 28 11 5.2 4.1 13 6.5 180W 218 205 185 28 11 5.2 4.1 13 9 225W 218 205 185 35 11 5.2 5.2 13 9 300W 243 230 210 35 11 5.2 5.2 13 9 375W 287 274 254 35 11 5.2 5.2 13 9 450W 333 320 300 35 11 5.2 5.2 13 9
HOW TO ORDE ZZR Product Type.
ZZR type ZQR type
55W Rated Power.
40W~300W 60W~450W
10 Resistance Value. ( )
J Resistance Tolerance.
G Assembly Method.
2-8part-assembly G-Horizontal mount N-No mounts. Z-Vertical mount.
( ) Indicates resistance value H=3% J=5% in units of ohms. K=10%
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 7/17
E
K
H
D
A B C
J 12 12 12 12 12 12 13 13 13 13
K 42 42 42 42 42 42 48 48 48 48
J
F
Resistance Range ( ) 1~4 1~5 1~7 1~9 1~10 1~12 1~15 1~20 1~25 1~30
E
K
H
D
I
A B C
J 12 12 12 12 12 12 13 13 13 13
K 42 42 42 42 42 42 48 48 48 48
J
G
F
Resistance Range ( ) 0.1~5K 0.1~6 K 0.1~7 K 0.1~10 K 0.1~12 K 0.1~15 K 0.1~18 K 0.1~25 K 0.1~30 K 0.1~35 K
I
TOKEN MEANS QUALITY AND SERVICE
ZNR TYPE 40W-300W
I G
Flat Ceramic Form, Set-Type, Low Inductive Wire-Wound Resistor Power Dimensions (m/m) Resistance Range ( ) Rating A B C D E F G H I J K 40W 83 70 50 28 11 5.2 4.1 13 6.5 12 42 0.1~2 K 55W 123 110 90 28 11 5.2 4.1 13 6.5 12 42 0.1~2.5 K 70W 153 140 120 28 11 5.2 4.1 13 6.5 12 42 0.1~3 K 95W 183 170 150 28 11 5.2 4.1 13 6.5 12 42 0.1~4.5 K 100W 193 180 160 28 11 5.2 4.1 13 6.5 12 42 0.1~5.5 K 120W 218 205 185 28 11 5.2 4.1 13 9 12 42 0.1~7 K 150W 218 205 185 35 11 5.2 5.2 13 9 13 48 0.1~8.5 K 200W 243 230 210 35 11 5.2 5.2 13 9 13 48 0.1~12 K 250W 287 274 254 35 11 5.2 5.2 13 9 13 48 0.1~14 K 300W 333 320 300 35 11 5.2 5.2 13 9 13 48 0.1~16 K
ZQN TYPE 60W-450W
Flat Ceramic Form, Wave-Type, Low Inductance Resistor Power Dimensions (m/m) Rating A B C D E F G H I J 60W 83 70 50 28 11 5.2 4.1 13 6.5 12 80W 123 110 90 28 11 5.2 4.1 13 6.5 12 100W 153 140 120 28 11 5.2 4.1 13 6.5 12 140W 183 170 150 28 11 5.2 4.1 13 6.5 12 150W 193 180 160 28 11 5.2 4.1 13 6.5 12 180W 218 205 185 28 11 5.2 4.1 13 9 12 225W 218 205 185 35 11 5.2 5.2 13 9 13 300W 243 230 210 35 11 5.2 5.2 13 9 13 375W 287 274 254 35 11 5.2 5.2 13 9 13 450W 333 320 300 35 11 5.2 5.2 13 9 13
www..com
HOW TO ORDER ZNR Product Type.
ZNR type ZQN type
300W Rated Power.
40W~300W 60W~450W
500 Resistance Value. ( )
J Resistance Tolerance.
G Assembly Method.
2-8part-assembly G-Horizontal mount N-No mounts. Z-Vertical mount.
( ) Indicates resistance value H=3% J=5% in units of ohms. K=10%
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 8/17
E
K
H
D
A B C
K 42 42 42 42 42 42 48 48 48 48
J
F
Resistance Range ( ) 1~4 1~5 1~7 1~9 1~10 1~12 1~15 1~20 1~25 1~30
E
K
H
D
I
J A B C
G
F
TOKEN MEANS QUALITY AND SERVICE
LARGE CAPACITY METAL-CLAD POWER RESISTORS
AL RESISTOR SERIES An aluminum-encased resistor consists of an alloy metal coil-type resistance element assembled into an aluminum enclosure. Following high-temperature anodization, the enclosure is filled with a special non-flammable cement paste and after hardening, insulation is applied thro a high-temperature process Since the resistor is embedded in the heat-proof cement, it is not affected by external mechanical force, dusty environments, and extreme duty. It is durable, vibration-proof, dissipates heat well, and has a low temperature coefficient, with resistance varying in direct proportion. Supporting a flexible range of applications, the product is easy to utilize and install. Applications include industrial machinery, load testing, electric power distribution, instruments, and automated control installations. For custom specifications, please contact us to discuss the details. PERFORMANCE SPECIFICATIONS Test Item Test Methods
Resistance tolerance Temperature coefficient Power rating load Short-term overload
Characteristics
JIS-C-5202 5-1 Tolerance resistance10% (K) JIS-C-5202 5-2 200PPM/ C max. R/R (0.5%+0.1 ) Surface temperature up 350C max. JIS-C-5202 5-4 JIS-C-5202 5-5 Free of appearance or structural irregularity R/R (2%+0.1 ) 1000% rated power 5 seconds 100M min. Insulation resistance JIS-C-5202 5-6 1000VDC Dielectric withstanding JIS-C-5202 5-7 Free of appearance or structural irregularity R/R (0.1%+0.05 ) Voltage 2000VDC 1 minute Terminal strength JIS-C-5202 6-1 8Kg 30 seconds Free of appearance or structural irregularity Resistor strength JIS-C-5202 6-2 30Kg 30 seconds Free of appearance or structural irregularity Free of appearance or structural irregularity surface coating crack. Vibration JIS-C-5202 6-3 5m/m 10 ~ 50 ~ 10 Hz/min (1%+0.05 ) X-Y-Z 2 hours each www..com Thermal shock JIS-C-5202 7-3 Resistor free of structural irregularity R/R (2%+0.1 ) Room temp. 30 minutes ON-55C 15 minutes OFF Free of appearance or structural irregularity surface coating crack. Humidity JIS-C-5202 7-5 40C 90%RH 240 hours (3%+0.1 ) Free of appearance or structural irregularity surface coating crack. Load life JIS-C-5202 7-10 90 minutes ON - 30 minutes OFF 500 (3%+0.1 ) hours Flame retardation JIS-C-5202 7-13-3-2 US UL-94 flame retardation test V-0 grade noncombustible 100% - 600% rated power load Remarks 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Resistor coating refers to UL-certified data provided by supplier.
R/R
R/R R/R
ASQ TYPE HIGH VOLTAGE, ALUMINUM ENCASED RESISTOR
Power Rating
60W 80W 120W
A
100 150 182
B
30 34 42
C
13 21 21
Dimensions (m/m) D E F
90 140 172 4.5 5 6 0.75mm 0.75mm 0.75mm
Weight G
75 125 150
H
400 400 400 66/g 170/g 175/g
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
B C F H A D G
Resistance Range ( )
1-10K 1-10K 1-10K Page 9/17
E
TOKEN MEANS QUALITY AND SERVICE
ASH TYPE HIGH VOLTAGE, ALUMINUM ENCASED RESISTOR
Power Rating
200W 300W 400W 500W 600W
A
200 280 360 440 520
B
65 65 65 65 65
C
45 45 45 45 45
Dimensions (m/m) D E F
185 265 345 425 505 6 6 6 6 6 M5x8mm M5x8mm M5x8mm M5x8mm M5x8mm
Weight G
160 240 320 400 480
H
300 300 300 300 300
I
2mm2 2mm2 2mm2 2mm2 2mm2 725/g 1050/g 1295/g 1650/g 1935/g
Resistance Range ( )
1-10K 1-10K 1-10K 1-10K 1-10K
ASZ TYPE HIGH VOLTAGE, ALUMINUM ENCASED RESISTOR
www..com
Power Rating
60W 80W 100W 120W 150W 200W 300W 400W 600W 800W 1500W
W1
40 40 40 40 40 60 60 60 60 60 130
H1
20 20 20 20 20 30 30 30 30 30 80
Dimensions (m/m) L12 L22 D0.5
115 140 165 190 215 165 215 265 335 400 485 100 125 150 175 200 150 200 250 320 385 400 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2
Weight L310
200 200 200 200 200 300 300 300 300 300 165/g 190/g 225/g 275/g 310/g 500/g 675/g 850/g 1070/g 1250/g 4300/g
Resistance Range ( )
2-2K 2-2.5K 2-3K 3-4K 3-5K 3-6K 5-7K 5-8K 5-9K 5-10K 15-1K
HOW TO ORDER ASQ Product Type.
ASQ type ASH type ASZ type
400W Power Rated.
60W~120W 200W~600W 60W~800W
20 Resistance Value. ( )
K Resistance Tolerance.
Assembly Method.
G-Horizontal mount N-No mounts. Z-Vertical mount.
( ) Indicates resistance value J=5% K=10% in units of ohms.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
F
B
E G
W
D
H
I
3L
N
Page 10/17
1L 2L
TOKEN MEANS QUALITY AND SERVICE
VARIABLE WIRE-WOUND POWER RESISTORS
VR RESISTOR SERIES A C-shaped ceramic or chromium-alloy wire as a resistance element. Except for the slide contact surface, the entire component is coated with a high-temperature, non-flammable resin. After cooling and drying, insulation is applied through a high-temperature process. Then, a centered rotating adjuster component is installed, which slides along the resistance element and varies the resistance to the desired value. The scope of the application includes educational modeling, load simulations, industrial machinery RPM adjustment, voltage and current adjustment, instruments, and automated control installations. For custom specifications, please contact us to discuss the details. FVR TYPE 25W-100W
J
www..com
Power Rating
25W 50W 100W
A
2.5 4.2 4.2
B
3.2 4.2 4.2
C
22 28 42
D
3/8" 3/8" 3/8"
Dimensions (m/m) E F G H
6x12 6x12 6x12 42 64 85 50 60 75 50 70 90
Weight I
11 11 11
J
5 8 8
K
10 14 14 74/g 160/g 372/g
Resistance Range ( )
5 -2.5K 7 -3.5K 10 -5K
PERFORMANCE SPECIFICATIONS Test Item Test Methods
Resistance tolerance Insulation resistance Dielectric withstanding voltage Terminal strength Vibration Load life Full gyration angle Flame retardation Remarks JIS-C-5261 5-1 JIS-C-5261 6-1 500VDC JIS-C-5261 7-1 1000VDC 1 minute Between terminal and axis JIS-C-5261 6-5 3Kg 30 seconds JIS-C-5261 6-6 1.5m/m 10 ~ 50 ~ 10 Hz/min X-Y-Z 2 hours each JIS-C-5261 7-7
Characteristics
Resistance tolerance 10% 100M min Free of appearance or structural irregularity
Free of appearance or structural irregularity R/R (2%+0.1 ) Free of appearance or structural irregularity R/R (2%+0.1 ) Free of appearance or structural irregularity R/R (5%+0.1 ) JIS-C-5261 6-1 3005C 100% - 600% rated power load US UL-94 flame retardation test V-0 grade noncombustible 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Resistor coating refers to UL-certified data provided by supplier.
HOW TO ORDER FVR Product Type.
FVR type
25W Rated Power.
25W~100W
2.5K Resistance Value. ( )
K Resistance Tolerance.
K=10%
( ) Indicates resistance value in units of ohms.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 11/17
H
I
F
E K G C
D
A
B
TOKEN MEANS QUALITY AND SERVICE
WIRE-WOUND STARTER POWER RESISTORS
ST RESISTOR SERIES A tubular ceramic resistor has a fixed number of windings and is wound with alloy wire as a resistance element. The staggering wound is made according to the desired resistance value, followed by the placement of the component mounts. It provides high starter resistor power and is durable, is high temperature-resistant, dissipates heat well, has a low temperature coefficient that varies in direct proportion, and is suitable for application loads involving brief current surges. Due to the set number of windings on the ceramic form, the resistance value range is relatively low. Tolerance is 10% and this product is available in various shapes or in resistance boxes. Suitable for motor starters, load measurements, industrial machinery, electric power distribution, instrumentation, and automation control installations, etc. For custom specifications, please contact us to discuss the details. DST TYPE 500W TUBULAR CERAMIC, STARTER WIRE-WOUND RESISTOR
G E
www..com
DST TYPE 600W-1000W TUBULAR CERAMIC, STARTER WIRE-WOUND RESISTOR
Power Rating
500W 600W 1000W
A
280 300 420
B
40 44 48
C
23 26 30
D
45 50 56
Dimensions (m/m) E F G H
15 15 15 326 342 470 6 8 8 22 32 32
I
34 34 40
J
346 362 490
K
85 90 105
HOW TO ORDER DST Product Type.
DST type
1000W Rated Power.
500W~1000W
0.5 Resistance Value. ( )
Resistance Tolerance.
K=10%
( )Indicates resistance value in units of ohms.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
K K
K
D D
H I L
I L
M
M
J F A
J F F A
B
C
B C
L
8 8 9
Weight Resistance Range ( )
970/g 1277/g 1887/g 3.5 -7 0.5 -3 0.5 -3
K
Page 12/17
TOKEN MEANS QUALITY AND SERVICE
SLIDE-TYPE WIRE-WOUND POWER RESISTORS
SS RESISTOR SERIES A tubular ceramic form has copper-alloy or chromium-alloy windings as a resistance element, with the resistor mount attachment method the same as the other resistors described. Except for the sliding contact surface on the windings, the entire component is coated with a high-temperature non-flammable resin. The adjustment mechanism is a rotating point that slides directly on the resistance element, which allows variation of the resistance value (See the specifications of the DR series and VR series for exact features). Suitable for education, testing, load simulations, automation control installations, etc. For custom specifications, please contact us to discuss the details. BSR TYPE 200W -1300W
Slide-Type Wave, Variable Wire-Wound Resistor Power Dimensions (m/m) Rating CASE A B C Ceramic Rod Bakelite 200W A 285 130 135 28x250 120x70x10 400W B 360 150 185 40x325 170x90x10 500W B 360 150 185 40x325 170x90x10 1000W C 570 160 200 60x535 185x100x10 1300W D 680 160 200 65x645 185x100x10
HOW TO ORDER BSR
www..com
500W Rated power.
200W~1300W
10 Resistance value. ( )
K Resistance tolerance.
K=10%
Product type.
BSR type
( ) Indicates resistance value in units of ohms.
BSQ TYPE 300W -2000W
Slide-Type Wave, Variable Wire-Wound Resistor Power Dimensions (m/m) Rating CASE A B C Ceramic Rod Bakelite 300W A 285 130 135 28x250 120x70x10 600W B 360 150 185 40x325 170x90x10 750W B 360 150 185 40x325 170x90x10 1500W C 570 160 200 60x535 185x100x10 2000W D 680 160 200 65x645 185x100x10
HOW TO ORDER BSQ Product type.
BSQ type
2000W Rated power.
300W~2000W
20 Resistance value. (
( ) Indicates resistance value in units of ohms.
K ) Resistance tolerance.
K=10%
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
A
C
B
Resistance Range ( ) 0.5-30 0.5-60 0.5-75 0.5-150 0.5-200
A
C B
Resistance Range ( ) 0.5-2K 0.5-4K 0.5-5K 0.5-10K 0.5-13K
G Assembly method.
G- Horizontal mount N- No mounts. Z- Vertical mount.
G Assembly method.
G- Horizontal mount N- No mounts. Z- Vertical mount.
Page 13/17
TOKEN MEANS QUALITY AND SERVICE
ASSEMBLY-TYPE LOAD RESISTOR BOX
BOX RESISTOR SERIES An assembly-type power resistor enclosure contains DR series of and/or DQ series resistors. The box offers excellent protection and safety, in that it not only provides high power load capability and durability, excellent heat dissipation, and a low temperature coefficient that is directly proportional, but also accommodates a flexible range of assembly options for convenient utilization and installation (Refer to the DR series and DQ series features for exact specifications). Suitable for educational modeling applications, load testing, industrial machinery, electric power distribution, instruments and automation control installations, etc. For custom specifications, please contact us to discuss the details. BDR TYPE 200W-3200W
High Voltage, Assembly-Type Resistance Box Power Dimensions (m/m) Rating CASE A B C D E F GH I J 200W A 345 90 76 325 45 43 8 268 400W A 345 90 76 325 45 43 8 268 400W B 450 152 100 428 30 90 74 10 355 800W B 450 152 100 428 30 90 74 10 355 1200W C 450 300 100 428 74 146 74 146 10 355 1600W C 450 300 100 428 74 146 74 146 10 355 2000W D 560 250 195 535 27 190 122 10 420 2400W D 560 250 195 535 27 190 122 10 420 2800W D 560 250 195 535 27 190 122 10 420 3200W D 560 250 195 535 27 190 122 10 420
www..com
BQR TYPE 300W-4800W
High Voltage, Assembly-Type Resistance Box Power Dimensions (m/m) Rating CASE A B C D E F GH I J 300W A 345 90 76 325 45 43 8 268 600W A 345 90 76 325 45 43 8 268 600W B 450 152 100 428 30 90 74 10 355 1200W B 450 152 100 428 30 90 74 10 355 1800W C 450 300 100 428 74 146 74 146 10 355 2400W C 450 300 100 428 74 146 74 146 10 355 3000W D 560 250 195 535 27 190 122 10 420 3600W D 560 250 195 535 27 190 122 10 420 4200W D 560 250 195 535 27 190 122 10 420 4800W D 560 250 195 535 27 190 122 10 420
HOW TO ORDER BDR Product Type.
BDR type BQR type
2400W Rated Power
200W~3200W 300W~4800W
13.6 Resistance Value. ( )
K Resistance Tolerance.
J=5% K=10%
G Assembly Method.
G-Horizontal mount N-No mounts. Z-Vertical mount.
( ) Indicates resistance value in units of ohms.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 14/17
C
I
B H
G
A D J
E
F
Resistance Range ( ) 0.1~30K 0.1~60K 0.1~60K 0.1~120K 0.1~180K 0.1~240K 0.1~300K 0.1~360K 0.1~420K 0.1~480K
C
I
B H
G A D J
E
F
Resistance Range ( ) 0.1~100K 0.1~200K 0.1~200K 0.1~400K 0.1~600K 0.1~800K 0.1~1000K 0.1~1200K 0.1~1400K 0.1~1600K
TOKEN MEANS QUALITY AND SERVICE
ALUMINUM HOUSED WIREWOUND RESISTORS Precision Power Resistors Aluminum Housed (Chassis Mount) FEATURE: 1. High power rating, small size and ultra precision. 2. Standard winding & non-inductive winding types. 3. High stability, strong construction. GENERAL SPEC: 1. Wattage Range: 6 styles to choose ranging from 5 to 250 watts. 2. Resistance Tolerance: 10%, 5%, 3%, 2%, 1%, 0.5%Operating 3. Temperature Range: -55% to +275+ 4. Dielectric Strength: AH-5 AH-10 AH-25 1000V AH-50
STANDARD ELECTRICAL SPECIFICATIONS Type AH-5 AH-5N AH-10 AH-10N AH-25 AH-25N AH-50 AH-50N AH-100 AH-100N
www..com
MIL Stype RE60G RE60N RE65G RE65N RE70G RE70N RE75G RE75N RE77G RE77N RE80G RE80N
P25+Rated Industry 5 5 10 10 25 25 50 50 50 100 250 250
Power (W) Military 5 5 10 10 20 20 30 30 75 75 120 120 0.05%,0.1% 1.0~510 1.0~100 1.0~1.2K 1.0~860 0.5~2.7K 1.0~1.2K 0.5~3.9K 1.0~2.7K 1.0~5.6K 1.0~3.9K 0.1~12K 1.0~5.6K
Resistance 0.25% 0.5~1.5K 1.0~200 0.5-2.7K 1.0~1.2K 0.1~3.9K 1.0~2.7K 0.1~5.6K 1.0~3.9K 0.1~8.2K 1.0~5.6K 0.1~27K 1.0~8.2K
Range ( ) 0.5% 0.1~1.2K 1.0~860 0.1~2.7K 1.0~1.2K 0.1~3.9K 1.0~2.7K 0.1~5.6K 1.0~3.9K 0.05~12K 1.0~5.6K 0.1~27K 1.0~8.2K 1%,5%,10% 0.10~3.32K 1.0~1.65K 0.10~5.62K 1.0~2.8K 0.10~12.1K 1.0~6.04K 0.10~39.2K 1.0~19.6K 0.05~29.4K 1.0~14.7K 0.10~35.7K 1.0~17.4K
AH-250 AH-250N
Performance Parameters
Short Time Over Load Moisture Resistance Moisture Load Life Load Life
Test Conditions
5X wattage rating-5sec. Temp 40C moisture 95% DC 100V 500Hr Temp 40C moisture 95% 1/10 X wattage rating (1.5Hr on-0.5Hr OFF)- Repeat 1000Hr Load Rating (chassis mounted) (1.5Hour on 0.5Hour OFF) Repeat 1000Hours 10c/s~50c/s~10c/s(1Min)-2Hours each of paralleled and right angle 275C 2Hours AH-5 AH-10 AH-25 1000V AH-50 1500V AH-100 AH-250 2500V Under the same test condition of Dielectric Strength, Load DC500V and measure the Insulation R. (1) Pull Test (30 sec Min) AH-51kg, AH-10 2.3kg, AH-25, AH-50 4.5kg (2) Torque Test (5~15sec) AH-100 27kg-cm, AH-250 36kg-cm
Specifications
R(0.5%+0.05 R(0.5%+0.05 R(0.5%+0.05 R(1.5%+0.05 ) Max. ) Max. ) Max. ) Max.
Vibration Heat Resistance Dielectric Strength
R(0.2%+0.05 R(0.5%+0.05 R(0.5%+0.05 Max. 1000M Min.
) Max. ) Max. )
Insulation Resistance
Terminal Strength
R(0.2%+0.05
) Max.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
Page 15/17
TOKEN MEANS QUALITY AND SERVICE
Surface Temperature Versus Power Load (On Chassis) 150 TEMP.(+ ) AH-250 AH-100 100 50 0 AH-50 AH-25 AH-10 AH-5 2 60 80 40 % OF RATED POWER 100 Derating Curve ALUMINUM CHASSIS %OF Rated Power 120 100 80 A 60 B 40 C 20 0 25 75 125 175 225 275 325
AMBIENT TEMP(+)
Derating is required to reduce chassis ounting area and for high ambient temperatures. Curves: A=5 & 10 watt unites, unmounted. B=25 watt units, unmounted. C=50, 100 & 250 watt units, unmounted Materials : Silicone Encapsulant : Stainless steel End caps : Ceramic steatite or aluminum Core : Aluminum with hard anodic coating Housing : Copper-nickel alloy, nickel-chrome alloy or manganese copper Element : 5~50W Tinned terminals Standard Terminals 100~250W Threaded terminals PRECISION POWER RESISTORS DIMENSIONS: 5~50W, 100W, 250W
www..com
DIMENSIONS AH-5, AH-10, AH-15, AH-50, AH-5N, AH-10N, AH-15N, AH-50N
D C A M P F E G
P 0.1 6.7 7.95 11.1 10.3
Page 16/17
N
B
K
L
DIMENSIONS A Type 0.1 AH-5 11.2 AH-10 14.2 AH-25 18.2 AH50 40
B 0.1 12.5 15.9 19.8 21.4
C 0.5 15.2 19 27 50
D 1.5 28.6 34.9 49.2 70.6
E 0.4 8.5 10.7 14 16
F 0.1 16.4 20.3 27.4 29
G 0.4 8.1 9.9 13.9 15.5
H 0.2 1.7 1.9 1.9 2.2
J 0.2 3.8 4.2 5.9 6.6
K 0.2 2 2.4 4.4 5
L 0.1 2.4 2.4 3.2 3.2
M 0.02 1.5 2 2 2
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
H
N 0.1 1.3 2.2 2.2 2.2
TOKEN MEANS QUALITY AND SERVICE
AH-100, AH-100N
2-4.8 0.2 46 0.8 M5 57.2 0.2 71.2 0.2 13 0.4 44.6 0.8 4.8 0.8 54 0.8 14 0.4 55.6 0.8 6.4 0.8
20 Resistance Value. () D Resistance Tolerance. (%)
M5
7.5 0.8 70 0.2 89 0.8 139 2
AH-250, AH-250N
76 0.3 4-4.8 0.2 M6 64 0.2 76 0.2
www..com
M6
8
114 0.8 177 2.0
HOW TO ORDER AH-250 / AH-250N Product Type. 250W Rated Power.
Phone:+886 2 29810109 Fax:+886 2 29887487 Email: token@token.com.tw http://www.token.com.tw
24.4 0.4
Page 17/17
19.6 0.4

▲Up To Search▲

Price & Availability of ZNR

	To Download ZNR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .