View A0805-100NS-B_198255.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRELIMINARY
ACTIVE (DIGITAL) DELAY LINES
RESISTORS wCOILS wDELAY LINES
A0805 SERIES 5-TAP 8-PIN DIP SA0805 SERIES 5-TAP 8-PIN SIP A1405 SERIES 5-TAP 8-PIN DIP RCD's digital delay Wide selection of sizes! precise tap delines have been designed to provide the necessary A1410 SERIES 10-TAP 14-PIN DIP lays with allschottky-type anddrive and pick-off circuitry. All inputs and outputs are require no additional components to achieve
FEATURES
r Economical cost, prompt delivery! r Wide varieties of values r Choice of 5 or 10 equally spaced taps r TTL and DTL compatible r Operating temperature: 0C to 70C r Excellent for applications requiring high delay stability, fast rise times and no jitter, such as memory boards, disk drives, and signal processing
specified delays. Encapsulated/molded construction ensures full compliance to all applicable requirements of MIL-D-23859. Units are 100% inspected for solder joint integrity and electrical conformance.
TEST CONDITIONS @25C
1) Delay measured at 1.5V on leading edge only with no loads on output. 2) Rise time measured from 0.75V to 2.4V. 3) Delay will inversely vary approximately 4% for every 5% change in supply voltage. 4) Supply voltage (VCC) = 5.0.25VDC 5) Input test pulse: 3.2V, 2nS rise time, width>40% of total delay, pulse period to be a minimum of 3x the pulse width.
OPTIONS
r Non-standard delay times or tolerances r Non-symmetrical tap delays r Dynamic RAM timing delay r Faster rise times r ECL, H-CMOS, and low power designs available r Measurement at both leading and trailing edges (Opt. T). r Ceramic IC's screened to MIL-STD-883, -55 to +125C per MIL-D-83532 (Opt. ER) r Fast logic TTL available
Total Delay Delay Per Tap (n S ec) A0805 S A080 A1410 A1405
TYPE A0805 (Available
20nS to 500nS)
.250 [6.35] Max. .018 [.457] Typ.
.500 [12.7] Max.
VCC .300 .400 [10.2] 1 [7.62] Max. IN
Outputs 7263
5

8
[2.54]
Typ.
.100
.300 [7.62]
4 G Outputs 3456 1 VCC 2 IN
R
TYPE SA0805 (Available 20nS to 250nS)
.810 [20.6] Max.
7
.340 [8.64] Max. .150 [3.81] Typ. .020 [.51]
.180 [4.57] Max.
.018 [.457] Typ.
.100 [2.54]
Typ.
.010
8 G
R
[.254]
20 25 30 40 50 60 75 100 125 150 175 200 250 300 350 400 450 500 750 1000
4 5 6 8 10 12 15 20 25 30 35 40 50 60 70 80 90 100 150 200
* * * * 5 6 7.5 10 12.5 15 17.5 20 25 30 35 40 45 50 75 100
TYPE A1405 - Economy
(20nS to 1000nS)
.120 [3.05] Min.
TYPE A1405A
Auto Insertable Molded (20nS to 1000nS)-also avail. in .165" profile
.300 [7.62] Max. .150 [3.81] Typ.
TYPE A1410
(Available 50nS to 1000nS)
.280 [7.11] Max. .018 [.457] Typ. .100 [2.54]
.800 [20.3] Max.

.785 [19.9] Max.
.25 [6.35]

.020.003 [.5.076]
.100 [2.54] Typ. .050 [1.27] Typ.
.600.010 [12.7.254]
.280 [7.11]
.050 [1.27]
.800 [20.3] Max.
.400 [10.2] Max.
.100 [2.54]
.400 [10.2]
.300 [7.62]

.010 [.254]
.300.01 [7.62.254]
12 4 10 6 8 OUT
.800 [20.3] Max.
.600.010 [12.7.254]
.300.010 [7.62.254]
14 VCC 1 IN G 7
.300.010 [7.62.254] 14 VCC IN 1 G 7
13 3 12 4 11 5 10 6 9
8 OUT
R
R
* Consult factory for availability.
ELECTRICAL CHARACTERISTICS
Total Delay Tolerance Tap Delay Tolerance Insulation Resistance Dielectric Strength Rise Time 5% or 2nS (whichever is greater) 5% or 2nS (whichever is greater) 1000MW min. 100VDC 4nS max.
P/N DESIGNATION:
A1405
- 100nS - B
RCD Type Options: (leave blank if standard) ER= MIL-grade (screened to MIL-STD-883), T= measurement at both leading and trailing edges, 39=-40-+85C op. temp. Total Delay Packaging: B=bulk (standard)
RCD Components Inc., 520 E. Industrial Park Dr., Manchester, NH USA 03109 Tel: (603) 669-0054 Fax:(603) 669-5455 E-mail: rcdcompinc@aol.com www.rcd-comp.com
FAXXX specifications subject to change without notice

▲Up To Search▲

Price & Availability of A0805-100NS-B

	To Download A0805-100NS-B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .