View LD-301DYL1-B0-MT_212828.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

COTCO LUMINANT DEVICE (HUIZHOU) LTD.
SPECIFICATION FOR COTCO LED LAMP Document No : Model No: Rev. No : Date: SPE/LD-301DYL1-B0-MT LD-301DYL1-B0-MT 03 2006-08-29
Description: 3 x 3mm, QFN Type, High Power Amber LED For Illumination, Clear Compound Encapsulated. *This specification is only for MT Dice Material: AlGaInP
Confirmed by Customer: Date:
ATTENTION
OBSERVE PRECAUTIONS
ELECTROSTATIC SENSITIVE DEVICES
For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: info@marktechopto.com
Document No. SPE/LD-301DYL1-B0-MT Rev. No. 03 Features Package Outline
-
High luminous flux output for illumination Exposed pad design for excellent heat transfer Designed for high current operation Reflow soldering applicable
Absolute Maximum Ratings at Ta = 25C (on metal core PCB)* Items
Forward Current Peak Forward Current** Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction-to-Ambient*** Junction-to-Case***
Symbol Absolute maximum Rating Unit IF IFP VR PD Topr Tstg Tj ja jc 100 200 5 360 -40 ~ +85 -40 ~ +85 +110 220 85 mA mA V mW
B A
TOP VIEW
C C C C/W C/W
SIDE VIEW
C
A : CATHODE B : HEAT SINK C : ANODE
BACK VIEW
ALL DIMENSION IS IN mm
*Metal core PCB defines as good heat transmission substrate (thickness of 1.7mm Al-based PCB in 12x12mm, jc <85C/W could do) ** Where pulse width <= 0.1msec, duty cycle <= 1/10 *** Rth test condition: mounted on 1.7mm Al-based PCB in size of 12x12mm
Typical Electrical & Optical Characteristics at Ta = 25C (on metal core PCB)* Items Forward Voltage Reverse Current Luminous Flux Dominant Wavelength 50% Power Angle Symbol VF IR lumen D 2 1/2 Condition IF = 100mA VR = 5V IF = 100mA IF = 100mA IF = 100mA --5.2 588 --Min. Typ. 2.8 --7 594 110 Max. 3.6 10 --600 --Unit V A lm nm deg
2/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LD-301DYL1-B0-MT Rev. No. 03 Standard bins for LD-301DYL1-B0-MT (IF = 100mA):
Lamps are sorted to Luminous flux -lm, VF & Dominant Wavelength -D bins shown. Orders for LD-301DYL1-B0-MT may be filled with any or all bins contained as below. All Luminous flux-lm, VF & Dominant Wavelength -D values shown and specified are at IF =100mA.
*G+
K or above 12 lm Luminous flux (lm) 9 lm 7 lm 5.2 lm 588 nm 592nm 596nm J H G 600 nm
Dominant Wavelength (D)
* G+ indicates Luminous Flux is at G bin or above.
Voltage Combination (IF = 100mA) Rank Voltage (V) V2 2.0-2.4V V3 2.4-2.8V V4 2.8-3.2V V5 3.2-3.6V
Wavelength Combination (IF = 100mA) Rank Wavelength (nm) Important Notes:
1) All ranks will be included per delivery; rank ratio will be based on Dices distribution. 2) Pb content < 1000PPM. 3) Tolerance of measurement of luminous flux is 10% 4) Tolerance of measurement of dominant wavelength is 1nm. 5) Tolerance of measurement of Vf is 0.1 V. 6) Packaging methods are available for selection, please refer to PACKAGING STANDARD. 7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 8) Please refer to APPLICATION NOTES for Application Notes.
X3 588 - 592
X4 592 - 596
X5 596 - 600
3/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LD-301DYL1-B0-MT Rev. No. 03 Graphs
If (mA) 120.0 100.0 80.0 60.0 40.0 20.0 0.0 Vf(V) 2.2 2.4 2.6 2.8 3.0 3.2 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
1.2 RELATIVE LUMINOUS FLUX 1.0 0.8 0.6 0.4 0.2 0.0 0.0 If(mA) 20 40 60 80 100 120
Half Power WL=20nm Domi WL=594nm 100% 75% 50% 25% 0% 400 500 600 700 800 FIG.3 RELATIVE LUMINOUS FLUX VS. WAVELENGTH. WL(nm)
FIG.2 FORWARD CURRENT.
IF(mA) 120 100 80 60 40 20 0 0 20 40 60 80 T ( C) 100
-90 -60 -30 0 30 60 90
50% Power Angle : 110 Ie(%)
0 100% 80%
ja=220C/W
60% 40% 20% 0%
FIG.4 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE DERATING BASED ON Tjmax=110C
FIG.5 FAR FIELD PATTERN
Items Prepared by Checked by Approved by FCN#
Signatures
WangFJ WangXM David
Date
2006-08-29 2006-08-29 2006-08-29 Rev.No 02 03 Date 06-07-12
Revision History
Change Description
Added 3.2-3.6 vf bin
G,H,J(min)5.2
2006-08-29 Change lumen bin range and rank from C,D,E(min)5.0 to
FCN20060297
Data is subject to change without prior notice; Copyright@2002 Cotco International Ltd.
4/4
Format #: COTCO-D-074
REV.4

▲Up To Search▲

Price & Availability of LD-301DYL1-B0-MT

	To Download LD-301DYL1-B0-MT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .