 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Frequency Sensitive Relays WILMARTM Protective Relays - WOUF Series, Over/Underfrequency Function: 81 O/U * ANSI/IEEE C37.90-1978 * UL file No. E58048 * CSA file No. LR61158 RIPS L ST INA CREWS M TER 32 S #6 - 3 The output contacts of frequency relays are energized when the frequency exceeds the adjustable set point. Overfrequency and underfrequency relays are available in 50, 60 and 400Hz. Combination over/underfrequency "band pass" relays are also available. These are energized at rated frequency and de-energized during overfrequency or underfrequency conditions. Frequency Differential relays are energized above the preset frequency. The pick-up and drop-out frequency settings are independently adjustable. 3 5 /8 4 1 /8 Operation: 1 /2 3 1 /4 11 /64" DIA. 4 MTG. HOLES Note: Dimensions in inches. Multiply values by 25.4 for dimensions in mm. 4 1 /2 4 The relay will energize at normal frequency; The normally closed contacts will open and the normally open contacts will close. The relay will drop-out after time delay at overfrequency or underfrequency. Typical Curves (WOUF Series) 90 80 PART NUMBER SELECTION Time Delay 70 Standard Time Delay A minimum, fixed inverse time delay is incorporated in all frequency relays to prevent nuisance tripping and is represented by the typical curves shown below. Adjustable Time Delay If additional time delay is required, a suffix "T" must be added to the part number. This allows the minimum fixed time delay to be field-adjustable up to 20 seconds 60 50 40 PRODUCT SPECIFICATIONS Part Number WOUF Series 30 0 1 2 3 4 5 6 Nominal Voltage (20%) ................. 120, 230, 380 and 460 volts Nonimal Frequencies ....................... 50, 60 and 400 Hz. Trip Point .......................................... Screwdriver adjustable. Adjustment range in accordance with ordering information. Operating Temperature .................... -40oC to +65oC Differential ........................................ The frequency pick-up to drop-out differential is .5% max Voltage Drift ..................................... 0.05% maximum frequency error for input voltage variation of 10% Time Delay ........................................ See Time versus Frequency curves Surge Withstand Capability ............. In compliance with C37-90B ANSI/IEEE Output Contacts ............................... One set N.O., one set N.C. Contact Ratings ................................ 5 amp resistive at 120 VAC or 28 VDC Notes: 1. Remove black screws for access to the frequency and the time adjustments. 2. Clockwise rotation of the frequency potentiometer will raise the frequency trip point. 3. Clockwise rotation of the time adjustment, option "T" will increase the drop-out time delay. 40 Drop-Out Time Delay PART NUMBER SELECTION Sample Part No. WOUF-12-5060-T Type: WOUF = Over/Underfrequency Input Voltage (VAC) 12 = 120 23 - 230 38 = 380 46 = 460 Frequency Range UF Adj. OF Adj. 50 = 40-50 Hz 50-60 Hz 60 = 50-60 Hz 60-70 Hz 400 = 350-400 Hz400-450 Hz Time Delay Options blank = Per Time Curve T = Adjustable Consult factory for additional models. Tyco Electronics / www.tycoelectronics.com / Factory Direct Technical Support: 800-253-4560, ext. 2023 (U.S., Canada, Mexico) or 805-220-2020, ext. 2023 (International) |
Price & Availability of WOUF-12-5060-T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |