 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 120W AC-DC Single Output Desktop Features : AS-120P series 3 pole AC inlet IEC320-C14 Built-in active PFC function, PF>0.95 Protections: Short circuit/ Over load/ Over voltage/Over temperature 3 High power density 5w/in Fully enclosed plastic case Approvals: UL/ CUL/ TUV/ CB/ CE No load power consumption<0.75W@240VAC ZCS/ZVS technology to reduce power dissipation 2 years warranty R SPECIFICATION MODEL ORDER NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT AS-120P-12 AS120P12R7B Note.2 12V TUV Rheinland Product Safety geprUfre Sicherheit AS-120P-15 AS120P15R7B 15V 6.7A 0 ~ 6.7A 100W 100mVp-p 13.5 ~ 16.5V AS-120P-20 AS120P20P1M 20V 6A 0 ~ 6A 120W 200mVp-p 18 ~ 22V 3.0% 1.0% 2.5% AS-120P-24 AS120P24P1M 24V 5A 0 ~ 5A 120W 200mVp-p 21.6 ~ 26.4V 2.0% 1.0% 2.0% AS-120P-48 AS120P48P1M 48V 2.5A 0 ~ 2.5A 120W 240mVp-p 43.2 ~ 52.8V 2.0% 1.0% 2.0% 8.4A 0~ 8.4A 100W 11 ~ 13.5V RIPPLE & NOISE (max.) Note.3 100mVp-p VOLTAGE ADJ. RANGE Fixed output by customer choose 4.0% VOLTAGE TOLERANCE Note.4 4.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT (max.) OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Note.5 Note.6 1.0% 3.5% 3000ms, 80ms at full load 50ms/230VAC 90 ~ 264VAC 47 ~ 63Hz PF 0.95/230VAC PF 1.0% 3.0% 16ms/115VAC at full load 127 ~ 370VDC 0.98/115VAC at full load 85.5% 1.4A/115VAC 120A/230VAC <1mA / 240VAC 87.5% 0.7A/230VAC 89.5% 90% 89% 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 14 ~ 16.8V 22.5 ~ 28V 17 ~ 21V Protection type : Shut down o/p voltage, re-power on to recover 90 15 (RTH2) Detect on heatsink of power transistor (Refer to output load derating curve) Protection type : Shut down o/p voltage, re-power on to recover 0 ~ + 50 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 3AXES 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved 27 ~ 33.6V 53.3 ~ 67.2V I/P-O/P:4.25KVDC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) class B, FCC part 15J class B EMC (Note. 7) HARMONIC CURRENT EMS IMMUNITY LIFE Compliance to EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A Average life expectancy of 6 years (12 hours / day, 70% load, 115VAC) 308.9K hrs min. MIL-HDBK-217F (25 ) 167*67*35mm (L*W*H) 0.52Kg; 30pcs/16.6Kg/1.1CUFT Standard type R7B,P2M: 2.5 * 5.5 OTHERS MTBF PACKING PLUG CABLE DIMENSION www..com CONNECTOR NOTE * 11mm, center positive for stock ; Other type available by customer requested Standard type 120cm of SPT-1, 16Awg*2c for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH. Ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 120W AC-DC Single Output Desktop Mechanical Specification AS-120P Case No.947A series Unit:mm 35 167 1200 50 67 23 14 16AWG 2C 35 167 1200 50 67 11 C"+" 16AWG 2C Outside Inside Plug Assignment Standard plug(For 12V,15V only) R7B PIN NO OUTPUT 2 1 3 4 Standard plug(For 20V,24V,48V only) 11 P1M P/N CENTER OUTPUT + ID 2.5 x OD 5.5 Outside C"+" 1,4 2,3 +V -V Inside Derating Curve Static Characteristics Ta=25 100 90 100 80 80 60 70 LOAD (%) LOAD (%) 0 10 20 30 40 50 60 70 (HORIZONTAL) 50 40 60 50 40 20 www..com AMBIENT TEMPERATURE ( ) 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:AS-120P-SPEC 2006-11-17 ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice |
Price & Availability of AS-120P
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |