View PA98_331877.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HIGH VOLTAGE POWER OPERATIONAL AMPLIFIER
PA98
MICROTECHNOLOGY
HTTP://WWW.APEXMICROTECH.COM
(800) 546-APEX
(800) 546-2739
FEATURES
* HIGH VOLTAGE -- 450V (225V) * HIGH SLEW RATE -- 1000V/S * HIGH OUTPUT CURRENT -- 200mA
APPLICATIONS
* * * * HIGH VOLTAGE INSTRUMENTATION PIEZO TRANSDUCER EXCITATION PROGRAMMABLE POWER SUPPLIES UP TO 430V ELECTROSTATIC TRANSDUCERS & DEFLECTION
PATENTED
DESCRIPTION
The PA98 is a high voltage, high power bandwidth MOSFET operational amplifier designed for output currents up to 200mA. Output voltages can swing up to 215V with a dual supply and up to +440 volts with a single supply. The safe operating area (SOA) has no second breakdown limitations and can be observed with all types of loads by choosing an appropriate current limiting resistor. High accuracy is achieved with a cascode input circuit configuration. All internal biasing is referenced to a bootstrapped zener-MOSFET current source. As a result, the PA98 features an unprecedented supply range and excellent supply rejection. The MOSFET output stage is biased on for linear operation. External compensation provides user flexibility. This hybrid circuit utilizes thick film (cermet) resistors, ceramic capacitors and silicon semiconductor chips to maximize reliability, minimize size and give top performance. Ultrasonically bonded aluminum wires provide reliable interconnections at all operating temperatures.
TYPICAL APPLICATION
DC FOCUS X SWEEP SAMPLE z = x2 + y2 Y SWEEP SAMPLE R IN2 PA98 TO FOCUS GRID R IN1 RF +225V
R
CL
225V
DYNAMIC FOCUSING
EQUIVALENT SCHEMATIC
D1 Q1 Q2 Q4 11 +VS 12 +VS
D23 COMP 4 5
Q8
Q9
Dynamic focusing is the active correction of focusing voltage as a beam traverses the face of a CRT. This is necessary in high resolution flat face monitors since the distance between cathode and screen varies as the beam moves from the center of the screen to the edges. PA98 lends itself well to this function since it can be connected as a summing amplifier with inputs from the nominal focus potential and the dynamic correction. The nominal might be derived from a potentiometer, or perhaps automatic focusing circuitry might be used to generate this potential. The dynamic correction is generated from the sweep voltages by calculating the distance of the beam from the center of the display.
Q12
9 CL 10 CL 6 OUT
EXTERNAL CONNECTIONS
1 2 3 NC Rc -IN +IN Cc RCL 4 5 6 7 8 9
PACKAGE: SIP03
Q6 -IN 1 Q10A
Q7 +IN 2 Q10B Q17 Q11
10
11
12
Q18 Q13 Q16 D2 8 -VS 7 -VS
* *
-Vs +Vs
TO LOAD AND FEEDBACK
* Bypassing required.
PHASE COMPENSATION Gain CC 1 68pF 20 10pF 100 3.3pF RC 100 330 0
CC RATED FOR FULL SUPPLY VOLTAGE APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 * ORDERS (520) 690-8601 * EMAIL prodlit@apexmicrotech.com
PA98
ABSOLUTE MAXIMUM RATINGS
SUPPLY VOLTAGE, +VS to -VS OUTPUT CURRENT, continuous within SOA POWER DISSIPATION, continuous @ TC = 25C2 INPUT VOLTAGE, differential INPUT VOLTAGE, common mode TEMPERATURE, pin solder - 10s max TEMPERATURE, junction2 TEMPERATURE, storage OPERATING TEMPERATURE RANGE, case
ABSOLUTE MAXIMUM RATINGS SPECIFICATIONS
450V 200mA 30W 25V VS 220C 150C -65 to +150C -55 to +125C
SPECIFICATIONS
PARAMETER INPUT OFFSET VOLTAGE, initial OFFSET VOLTAGE, vs. temperature OFFSET VOLTAGE, vs. supply OFFSET VOLTAGE, vs. time BIAS CURRENT, initial3 BIAS CURRENT, vs. supply OFFSET CURRENT, initial3 INPUT IMPEDANCE, DC INPUT CAPACITANCE COMMON MODE VOLTAGE RANGE4 COMMON MODE REJECTION, DC NOISE GAIN OPEN LOOP, @ 15Hz GAIN BANDWIDTH PRODUCT at 1MHz POWER BANDWIDTH PHASE MARGIN OUTPUT VOLTAGE SWING4 VOLTAGE SWING4 VOLTAGE SWING4 CURRENT, continuous SLEW RATE, AV = 20 SLEW RATE, AV = 100 CAPACITIVE LOAD, AV = +1 SETTLING TIME to .1% RESISTANCE, no load POWER SUPPLY VOLTAGE6 CURRENT, quiescent THERMAL RESISTANCE, AC, junction to case5 RESISTANCE, DC, junction to case RESISTANCE, junction to air TEMPERATURE RANGE, case NOTES: 1. 2. 3. 4. 5. 6. Full temperature range, F > 60Hz Full temperature range, F < 60Hz Full temperature range Meets full range specifications 2.5 4.2 30 -25 +85 C/W C/W C/W C Full temperature range 15 150 21 225 25 V mA IO = 200mA IO = 75mA IO = 20mA TC = 85C CC = 10pf CC = OPEN Full temperature range CC = 10pf, 2V step RCL = 0 Vs-10 V-8.5 V-8.0 200 470 1 50 Vs-6.5 Vs-6.0 Vs-5.5 400 1000 V V V mA V/s V/s pf s RL = 2K, CC = OPEN RL = 2K, CC = 3.3pf CC = 10pf CC = 3.3pf Full temperature range 96 111 100 300 500 60 dB MHz kHz kHz Full temperature range .5 10 3 75 5 .01 10 1011 4 110 1 2 30 10 50 100 mV V/C V/V V/kh pA pA/V pA pF V dB Vrms TEST CONDITIONS 1 MIN TYP MAX UNITS
VCM = 90V 100kHz BW, RS = 1K, CC = 10pf
VS-12 90
Unless otherwise noted: TC = 25C, compensation = CC = 68pF, RC = 100. DC input specifications are value given. Power supply voltage is typical rating. Long term operation at the maximum junction temperature will result in reduced product life. Derate internal power dissipation to achieve high MTTF. Ratings apply only to output transistors. An additional 10W may be dissipated due to quiescent power. Doubles for every 10C of temperature increase. +VS and -VS denote the positive and negative power supply rail respectively. Rating applies if the output current alternates between both output transistors at a rate faster than 60Hz. Derate max supply rating .625 V/C below 25C case. No derating needed above 25C case. The PA98 is constructed from MOSFET transistors. ESD handling procedures must be observed. The internal substrate contains beryllia (BeO). Do not break the seal. If accidentally broken, do not crush, machine, or subject to temperatures in excess of 850C to avoid generating toxic fumes.
CAUTION
APEX MICROTECHNOLOGY CORPORATION * 5980 NORTH SHANNON ROAD * TUCSON, ARIZONA 85741 * USA * APPLICATIONS HOTLINE: 1 (800) 546-2739
TYPICAL PERFORMANCE GRAPHS
PA98
PHASE RESPONSE
0 -45
OUTPUT STAGE INTERNAL POWER DISSIPATION, P(W)
40 32
POWER DERATING
NORMALIZED QUIESCENT CURRENT, I Q (X)
QUIESCENT CURRENT
1.20 1.15 1.10
PHASE, ()
24 16 8 0 0 25 50 75 100 125 150 CASE TEMPERATURE, T C (C)
-90 -135 -180 -225 -270 .2M
C C = 68pF C C = 10pF
TC=
1.05 1.00 .95 .90
125
C
TC = 25C
TC = -55C
C C = 3.3pF 1M 10M FREQUENCY F (Hz) 40M
0 100 300 400 450 200 TOTAL SUPPLY VOLTAGE, VS (V)
120
SMALL SIGNAL RESPONSE
VOLTAGE DROP FROM SUPPLY, V S - VO (V)
10 9
OUTPUT VOLTAGE SWING
500
POWER RESPONSE
OUTPUT VOLTAGE, VO (VPP )
OPEN LOOP GAIN, A (dB)
100 80 60 40 20 0 C C = 68pF C C = 10pF C C = 3.3pF
8
12
5
250
C
CC f .3p =3
CC
T
C
=
f 0p =1
7 6 5 4 0 100 200 250 OUTPUT CURRENT, I O (mA)
TC C = 25
55C TC = -
125 100 75 50
R L = 2K 25 50K 100K 200K 500K 1M 2M FREQUENCY, F (Hz) 5M
CC =6 8p f
-20 10
100 1K 10K .1M 1M 10M 20M FREQUENCY, F (Hz)
INPUT NOISE VOLTAGE, VN (nV/ / Hz)
SLEW RATE
1000 .05 .03
HARMONIC DISTORTION
AV = 30 PO = 15W CC = 10pf RL = 1K
20 15 10 7 5
INPUT NOISE VOLTAGE
SLEW RATE, (V/ S)
500
DISTORTION, (%)
.01 .005 .003
200
3 2 10
100 30 75 15 45 90 0 60 EXT. COMPENSATION CAPACITOR, C C (pF)
.001 10
100 1K 10K FREQUENCY, F (Hz)
100K
100 10K 1K FREQUENCY, F (Hz)
100K
COMMON MODE REJECTION, CMR (dB)
140 C C = 10pF 120 100 80 60 40 20 1K
POWER SUPPLY REJECTION, PSR (dB)
COMMON MODE REJECTION
POWER SUPPLY REJECTION
140 120 100 80 60 40 20 1 10 100 1K 10K .1M FREQUENCY, F (Hz) 1M 500
CURRENT LIMIT
CURRENT LIMIT, I LIM (mA)
300 200
100
50
20 1 5 10 2 20 30 RESISTOR VALUE, R CL ( )
10K 100K 1M FREQUENCY, F (Hz)
10M
APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 * ORDERS (520) 690-8601 * EMAIL prodlit@apexmicrotech.com
PA98
GENERAL
Please read the "General Operating Considerations" section, which covers stability, supplies, heatsinking, mounting, current limit, SOA interpretation, and specification interpretation. Additional information can be found in the application notes. For information on the package outline, heatsinks, and mounting hardware, consult the "Accessory and Package Mechanical Data" section of the handbook.
OPERATING CONSIDERATIONS
power dissipation listed elsewhere in the specification since the quiescent power dissipation is significant compared to the total.
INPUT PROTECTION
Although the PA98 can withstand differential voltages up to 25V, additional external protection is recommended. Since the PA98 is a high speed amplifier, low leakage, low capacitance JFETs connected as diodes are recommended (e.g. 2N4416, Q1-Q4 in Figure 1). The differential input voltage will be clamped to 1.4V. This is sufficient overdrive to produce maximum power bandwidth.
CURRENT LIMIT
For proper operation, the current limit resistor (RCL) must be connected as shown in the external connection diagram. The minimum value is 1.4 ohm, however for optimum reliability the resistor value should be set as high as possible. The value is calculated as follows; with the maximum practical value of 30 ohms. .7 RCL = ILIM - .016
POWER SUPPLY PROTECTION
Unidirectional zener diode transient suppressors are recommended as protection on the supply pins. The zeners clamp transients to voltages within the power supply rating and also clamp power supply reversals to ground. Whether the zeners are used or not, the system power supply should be evaluated for transient performance including power-on overshoot and power-off polarity reversals as well as line regulation. Conditions which can cause open circuits or polarity reversals on either power supply rail should be avoided or protected against. Reversals or opens on the negative supply rail is known to induce input stage failure. Unidirectional transzorbs prevent this, and it is desirable that they be both electrically and physically as close to the amplifier as possible.
SAFE OPERATING AREA (SOA)
The MOSFET output stage of this power operational amplifier has two distinct limitations: 1. The current handling capability of the MOSFET geometry and the wire bonds. 2. The junction temperature of the output MOSFETs. NOTE: The output stage is protected against transient flyback. However, for protection against sustained, high energy flyback, external fast-recovery diodes should be used.
SAFE OPERATING CURVES
The safe operating area curves define the maximum additional internal power dissipation the amplifier can tolerate when it produces the necessary output to drive an external load. This is not the same as the absolute maximum internal
500
STABILITY
The PA98 is externally compensated and performance can be tailored to the application. Use the graphs of small signal response and power response as a guide. The compensation capacitor CC must be rated at 500V working voltage. An NPO capacitor is recommended. The compensation network CCRC must be mounted closely to the amplifier pins 7 and 8 to avoid spurious oscillation.
+VS Z1
OUTPUT CURRENT FROM +VS OR -VS, (mA)
300 200
20
0m
S
DC ,T
10
0m
S
-IN 1 Q1 Q2 +IN Q3 PA98 Q4 2 7, 8 Z2 -VS 11, 12 6
100
DC ,T
DC ,T
C
=
25
C
C
=
85 C
50 30 20
C
=
12
5
C
FIGURE 1. OVERVOLTAGE PROTECTION
10 25
PULSE CURVES @ 10% DUTY CYCLE MAX 50 75 100 125 250 500 SUPPLY TO OUTPUT DIFFERENTIAL, VS -VO (V)
This data sheet has been carefully CORPORATION * 5980 NORTH SHANNON ROAD assumed for possible inaccuracies * USA * APPLICATIONS HOTLINE: 1 (800) 546-2739 APEX MICROTECHNOLOGY checked and is believed to be reliable, however, no responsibility*is TUCSON, ARIZONA 85741 or omissions. All specifications are subject to change without notice. PA98U REV.A OCTOBER 1999 (c) 1999 Apex Microtechnology Corp.

▲Up To Search▲

Price & Availability of PA98

	To Download PA98 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .