 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| V15 Olympian Pressure Relief Valve 3/4", 1", 1 1/4",1 1/2", Port Sizes q Olympian plug in design q Helps Protect compressed air systems from over pressure by retarding excessive pressure build up q High relief capacity, sensitive and accurate q Integral pilot operated design, suitable for in-line or indirect mounting q Threaded relief port for silencer or piped exhaust Technical Data Fluid: Compressed air Operating temperature*: -20 to +80C (0 to +175F) * Air supply must be dry enough to avoid ice formation at temperatures below 2C (35F). Ordering Information See Ordering Information on the following pages. Gauge ports: ISO G1/8 Exhaust port: ISO G1 Materials: Body: Aluminium Intermediate body: Aluminium Bonnet: Aluminium Bottom plug: Aluminium Adjusting screw: Steel Elastomers: Synthetic rubber Yoke:Aluminium ISO Symbol 12/96 Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document. N/AL.8.261.500.01 V15 Typical Performance Characteristics FLOW CHARACTERISTICS bar g 16 200 RELIEF PRESSURE 14 12 160 10 120 8 6 4 40 2 0 0 0 0 50 100 100 200 150 300 200 400 250 500 dm3/s 600 scfm psig UNPORTED RANGE: 1 to 10 bar (15 to 145 psig) 80 RELIEF AIR FLOW Ordering Information. Models listed include ISO G threads, 1 to 10 bar (5 to 145 psig) operating adjustment range* without gauge. Port Size G3/4 G1 G1 1/4 G1 1/2 Model V15-603-NNMD V15-803-NNMD V15-A03-NNMD V15-B03-NNMD Weight kg (lb) 2,21 (4.91) 2,20 (4.89) 2,22 (4.93) 2,26 (5.02) Alternative Models V1 5 -555-5555 Port Size 3/4" 1" 1 1/4" 1 1/2" Option Slotted screw Relief Pressure Not set * Substitute 6 8 A B Substitute 03 Substitute N Thread PTF ISO Rc taper ISO G parallel Outlet Pressure Adjustment Range* 0,4 to 4 bar (0 to 60 psig) 1 to 10 bar (15 to 145 psig) 2 to 17 bar (30 to 250 psig) Gauge With Without Substitute A B D Substitute F M S Substitute G N Relief valve can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. Accessories Wall Mounting Bracket G3/4 G1 G1 1/4 G1 1/2 18-001-979 18-001-979 18-001-978 N/A O 50 mm Pressure Gauge 6 bar (60 psig): 10 bar (150 psig): 25 bar (360 psig): R1/8 Connection 1/8 PTF Connection 18-013-012 18-013-013 18-013-014 18-013-202 18-013-204 18-013-205 N/AL.8.261.500.02 Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document. 12/96 V15 Dimensions mm (inches) 50 (1.97) 256 (10.1)* G1/8 190 (7.48) * Minimum clearance required to remove unit. 200 mm (7.87) for 1 1/4" and 1 1/2" models 100 (3.94) 50 (1.97) 232 (9.13) Bracket Mounting Use 4 mm (5/32") screws to mount bracket to wall. 8,5 (0.33) 208 (8.19)* 190 (7.48)* Bracket Kit Reference Item Wall Bracket Type 3/4" model 1" model 1 1/4" model 1 1/2" model Part Number 18-001-979 18-001-979 18-001-978 N/A 100 (3.94) 15 (0.59) Service Kits Item Service kit Part Number V15-100 Service kit includes, valve spring, slip ring, valve assembly, pilot diaphragm assembly and necessary seals and `o' rings. 72 (2.84) 12/96 Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document. 50 (1.97) N/AL.8.261.500.03 V15 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under `Technical Data'. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. Water vapor will pass through these units and will condense into liquid if air temperature drops in the downstream system. Install an air dryer if water condensation could have a detrimental effect on the application. N/AL.8.261.500.04 Our policy is one of continuous research and development. We reserve the right to amend, without notice, the specifications given in this document. 12/96 |
Price & Availability of V15-100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |