 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Device Selection Guide Chip Emitted Color Material AlGaInP Reddish Orange Water Clear Resin Color Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 1 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Package Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 2 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Absolute Maximum Ratings (Ta=25 Parameter Reverse Voltage Forward Current Peak Forward Current(Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature ) Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 50 60 60 2000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. Units V mA mA mW V Electro-Optical Characteristics (Ta=25 Parameter Luminous intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current VF IR Symbol IV 2 1/2 p d Min. 180 --------605.5 ------------- ) Typ. ----120 621 ----20 2.0 ----Max. 360 --------621.5 ----2.4 10 Unit mcd deg nm nm nm V A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 3 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Bin Range of Luminous Intensity Bin S1 S2 T1 Min. 180 225 285 Max. 225 285 360 mcd IF=20mA Unit Condition Bin Range of Dominant Wavelength Group Bin Code E1 A E2 E3 E4 Min. 605.5 609.5 613.5 617.5 Max. 609.5 613.5 617.5 621.5 nm IF=20mA Unit Condition Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 4 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Typical Electro-Optical Characteristics Curves Spectrum Distribution Relative Luminous Intensity (%) 100 75 Ta=25C Forward Current I (mA) F Forward Current vs. Forward Voltage 50 40 30 20 10 0 1.6 1.8 2.0 2.2 Ta=25C 50 25 0 500 600 650 550 Wavelength (nm) 700 2.4 2.6 Forward Voltage V (V) F Relative Luminous Intensity vs. Forward Current Ta=25C Relative Luminous Intensity (%) 1000 f=1KHz Duty=1/10 Relative Luminous Intensity vs. Ambient Temperature Relative Luminous Intensity (%) 1000 100 100 10 10 1 -60 -40 -20 1 0 20 40 60 80 100 0 10 Ambient Temperature Ta (C) Forward Current Derating Curve 50 Forward Current IF (mA) 40 30 20 10 0 1.0 0.9 0.8 0.7 2 1 10 10 Forward Current I F (mA) Radiation Diagram 0 3 10 Ta=25C 10 20 30 40 50 60 70 80 90 0 20 40 60 80 100 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 5 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm; Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 6 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: The tolerances unless mentioned is 0.1mm: Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 7 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10% No. 1 2 3 4 5 6 7 Items Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition Temp. : 260 5 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA/ 25 85 / 85%RH Test Hours/Cycles 6 min 300 Cycles 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Sample Size 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 8 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 9 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-0000594 http://www.everlight.com Prepared date:17-Apr-2006 Rev. 1 Page: 10 of 10 Prepared by: Rita Shen Revision :1 Release Date:2010-04-23 11:15:11.0 Expired Period: Forever LifecyclePhase: |
Price & Availability of 67-21-S3C-AS1T1-2T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |