View CSM-360-W57S-D22-GV201_345493.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRODUCT DATA SHEET
PhlatLight(R) White LED Illumination Products CSM-360 Series
Features
* Extremely high optical output: Over 6,000 lumens from a single package (White)
* Extremely high efficiency: Over 100 lumens per watt 3.15A * High thermal conductivity package - junction to heat sink
thermal resistance of only 0.90 C/W
PhlatLight(R) LEDs enable a new class of illumination applications.
* Four large, monolithic chips with uniform emitting area of 36
mm2
* Lumen maintenance of greater than 70% after 60,000 hours * Environmentally friendly: RoHS compliant * Variable drive currents: less than 1 A through 6.3 A to full reliability specifications
* High reliability
Table of Contents
Technology Overview............................................ 2 Test Specifications............................................... 2 PhlatLight Bin Codes............................................. 3 Product Shipping and Labeling Information.................. 7 Optical and Electrical Characteristics ........................ 8 Spectral Characteristics........................................10 Radiation Patterns ..............................................11 Thermal Resistance .............................................12 Mechanical Dimensions.........................................13 Ordering Information ...........................................14
Applications
* High Bay * Roadway and Parking Area * Outdoor Area Lighting * Transportation * Wide Area Lighting * Architectural Lighting * High Intensity General Lighting
www.luminus.com
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Last Update 2-9-10 PDS_001353 Rev 03
CSM-360 - Product Datasheet
Technology Overview
PhlatLight LEDs benefit from a suite of innovations in the fields of chip technology, packaging, and thermal management. These breakthroughs allow illumination designers to achieve efficient light engine designs and deliver high brightness solutions.
PhlatLight Technology
The name PhlatLight is derived from Photonic Lattice. Photonic lattice technology creates true surface emission from the source, which enables large area LED chips with uniform brightness over the entire LED chip surface. The optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power LEDs cannot.
Reliability
Designed from the ground up, PhlatLight LEDs are one of the most reliable light sources in the world today. PhlatLight LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that are well above 60,000 hours, PhlatLight LEDs are ready for the most demanding applications.
Packaging Technology
Thermal management is critical in high power LED applications. With a thermal resistance from junction to heat sink of 0.90 C/ W, PhlatLight CSM-360 devices have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter and longer lifetimes. The package is easy to use, and ready to be mounted in the lighting system.
Environmental Benefits
PhlatLight LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All PhlatLight products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury.
Understanding PhlatLight Test Specifications
Every PhlatLight LED device is fully tested to ensure that it meets the high quality standards of Luminus' products.
Multiple Operating Points (3.15 A, 6.3 A)
The tables on the following pages provide typical optical and electrical characteristics. Since the LEDs can be operated over a wide range of drive conditions (currents from less than 1 A to 6.3 A, and duty cycle from <1% to 100%) multiple drive conditions are listed. PhlatLight CSM-360 devices are production tested at 3.15 A. The values shown at 6.3 A are for additional reference at other possible drive conditions.
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 2
CSM-360 - Product Datasheet
PhlatLight White Binning Structure
PhlatLight White LEDs are tested for luminous flux and chromaticity at a drive current of 3.15 A and placed into one of the following luminous flux (FF) and chromaticity (WW) bins:
For ordering information, please refer to page 14 or PDS-001393: PhlatLight Binning and Labeling.
Flux Bins (TJ = 25 C)
Color W65S
6500K, Standard CRI (typ. 70)
Flux Bin (FF)
WT WU WV WT WU WV WT WU WV WR WS WT WR WS WT
Minimum Flux (lm) @ 3.15 A
2,500 3,000 3,600 2,500 3,000 3,600 2,500 3,000 3,600 1,750 2,100 2,500 1,750 2,100 2,500
Maximum Flux (lm) @ 3.15 A
3,000 3,600 4,300 3,000 3,600 4,300 3,000 3,600 4,300 2,100 2,500 3,000 2,100 2,500 3,000
W57S
5700K, Standard CRI (typ. 70)
W45S
4500K, Standard CRI, (typ. 70)
W40M
4000K, Moderate CRI, (typ. 83)
W30M
3000K, Moderate CRI, (typ. 83)
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 3
CSM-360 - Product Datasheet
Chromaticity Bins
Luminus' Standard Chromaticity Bins: 1931 CIE Curve
0.470
0.445
3500K 4000K
ES T4 S4 R4 Q4 R3 Q3 P3 N3 DP DR DT T3 S3 DV U3 V3 U4
2700K 3000K
EU V4 W3 DY W4 Y4 EW
0.420
EQ
BB Locus
Y3
0.395
5000K
4500K
EN P4 N4 M4 K4 J4 K3 J3 H3 DJ DM M3
CIEy
0.370
6500K
5700K
EH H4 G4 G3 DG
EK
0.345
F4
EF
0.320
DE
F3
0.295
DF
0.270 0.275
0.300
0.325
0.350
0.375 CIEx
0.400
0.425
0.450
0.475
0.500
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 4
CSM-360 - Product Datasheet
The following tables describe the four chromaticity points that bound each chromaticity bin. Chromaticity bins are grouped together based on the color temperature. 6500K Chromaticity Bins Bin Code (WW)
DG
5700K Chromaticity Bins Bin Code (WW)
DJ
5000K Chromaticity Bins Bin Code (WW)
EK
CIEx
0.307 0.322 0.323 0.309 0.305 0.313 0.315 0.307 0.303 0.312 0.313 0.305 0.313 0.321 0.322 0.315 0.312 0.321 0.321 0.313 0.302 0.320 0.321 0.303 0.283 0.303 0.307 0.289 0.289 0.307 0.309 0.293
CIEy
0.311 0.326 0.316 0.302 0.321 0.329 0.319 0.311 0.330 0.339 0.329 0.321 0.329 0.337 0.326 0.319 0.339 0.348 0.337 0.329 0.335 0.354 0.348 0.330 0.304 0.330 0.311 0.293 0.293 0.311 0.302 0.285
CIEx
0.322 0.337 0.336 0.323 0.321 0.329 0.329 0.322 0.321 0.329 0.329 0.321 0.329 0.337 0.337 0.330 0.329 0.338 0.337 0.329 0.320 0.338 0.338 0.321
CIEy
0.324 0.337 0.326 0.314 0.335 0.342 0.331 0.324 0.346 0.354 0.342 0.335 0.342 0.349 0.337 0.331 0.354 0.362 0.349 0.342 0.352 0.368 0.362 0.346
CIEx
0.338 0.356 0.355 0.338 0.337 0.345 0.345 0.337 0.338 0.347 0.345 0.337 0.345 0.353 0.352 0.344 0.346 0.355 0.353 0.345 0.337 0.352 0.350 0.336
CIEy
0.368 0.384 0.376 0.362 0.349 0.355 0.343 0.337 0.362 0.369 0.355 0.349 0.355 0.362 0.349 0.343 0.369 0.376 0.362 0.355 0.337 0.349 0.337 0.326
F3*
H3*
K3*
F4*
H4*
K4*
G3*
J3*
M3*
G4*
J4*
M4*
EF
EH
DM
DE
DF
* Sub-bins within ANSI defined quadrangles per ANSI C78.377-2008 (c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 5
CSM-360 - Product Datasheet
4500k Chromaticity Bins Bin Code (WW)
EN
4000K Chromaticity Bins Bin Code (WW)
EQ
3500K Chromaticity Bins Bin Code (WW)
ES
CIEx
0.356 0.376 0.374 0.355 0.353 0.361 0.359 0.351 0.355 0.364 0.361 0.353 0.361 0.370 0.367 0.359 0.364 0.374 0.370 0.361 0.351 0.367 0.364 0.350
CIEy
0.384 0.396 0.387 0.374 0.360 0.366 0.352 0.347 0.374 0.381 0.366 0.360 0.366 0.373 0.358 0.352 0.381 0.387 0.373 0.366 0.347 0.358 0.346 0.335
CIEx
0.376 0.404 0.401 0.374 0.370 0.382 0.378 0.367 0.374 0.387 0.382 0.370 0.382 0.395 0.390 0.378 0.387 0.401 0.395 0.382 0.367 0.390 0.386 0.364
CIEy
0.396 0.414 0.404 0.387 0.373 0.380 0.365 0.358 0.387 0.396 0.380 0.373 0.380 0.388 0.372 0.365 0.396 0.404 0.388 0.380 0.358 0.372 0.359 0.346
CIEx
0.403 0.435 0.430 0.400 0.394 0.407 0.402 0.389 0.400 0.415 0.407 0.394 0.407 0.422 0.415 0.402 0.415 0.430 0.422 0.407 0.389 0.415 0.409 0.385
CIEy
0.411 0.427 0.417 0.402 0.385 0.392 0.375 0.369 0.402 0.409 0.392 0.385 0.392 0.399 0.381 0.375 0.409 0.417 0.399 0.392 0.369 0.381 0.369 0.357
N3*
Q3*
S3*
N4*
Q4*
S4*
P3*
R3*
T3*
P4*
R4*
T4*
DP
DR
DT
3000K Chromaticity Bins Bin Code (WW)
EU
2700K Chromaticity Bins Bin Code (WW)
EW
CIEx
0.435 0.462 0.456 0.430 0.422 0.434 0.426 0.415 0.430 0.443 0.434 0.422 0.434 0.447 0.437 0.426 0.443 0.456 0.447 0.434 0.415 0.437 0.431 0.409
CIEy
0.427 0.437 0.426 0.417 0.399 0.403 0.385 0.381 0.417 0.421 0.403 0.399 0.403 0.408 0.389 0.385 0.421 0.426 0.408 0.403 0.381 0.389 0.377 0.369
CIEx
0.462 0.488 0.481 0.456 0.447 0.458 0.448 0.437 0.456 0.469 0.458 0.447 0.458 0.470 0.459 0.448 0.469 0.481 0.470 0.458 0.437 0.459 0.452 0.431
CIEy
0.437 0.444 0.432 0.426 0.408 0.410 0.392 0.389 0.426 0.429 0.410 0.408 0.410 0.413 0.394 0.392 0.429 0.432 0.413 0.410 0.389 0.394 0.382 0.377
U3*
W3*
U4*
W4*
V3*
Y3*
V4*
Y4*
DV
DY
* Sub-bins within ANSI defined quadrangles per ANSI C78.377-2008 (c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 6
CSM-360 - Product Datasheet
PhlatLight Product Shipping and Labeling Information
All PhlatLight products are packaged and labeled with their respective bin as outlined in the tables on page 3. Modules are packaged in trays of 10, with each package only containing one bin. The part number designation is as follows:
CSM
Product Family CSM: Multi-Chip on Board
360
Chip Area 360: 36 mm2
WNNX
Color WNNX: CCT and CRI See Note 1 Below
D22
Package Configuration D22: 36 x 36 mm board
FF
Flux Bin See page 3 for bins
WW
Chromaticity Bin See page 4 for bins
Note 1. WNNX nomenclature corresponds to the following: W = White NN = color temperature, where: 65 corresponds to 6500K 40 corresponds to 4000K 30 corresponds to 3000K, etc. X = color rendering index, where: S (standard) corresponds to a typical CRI of 70 M (moderate) corresponds to a typical CRI of 83 H (high) corresponds to a typical CRI of 92. Note 2. Some flux and chromaticity bins may have limited availability. Application specific bin kits, consisting of multiple bins, may be available. For ordering information, please refer to page 14 and reference PDS-001393: PhlatLight Binning and Labeling document. Example: The part label CSM-360-W65S-D22-WS-G4 refers to a 6500K standard CRI white, CSM-360 module, D22 package configuration, with a minumum flux value of 2,100 to 2,500 lumens and a chromaticity value within the box defined by the four points (0.313, 0.338), (0.321, 0.348), (0.322, 0.336), (0.312, 0.328). Example: The part label CSM-360-W30M-D22-WQ-U3 refers to a 3000K moderate CRI white, CSM-360 module, D22 package configuration,with a flux range of 1,450 to 1,750 lumens and a chromaticity value within the box defined by the four points (0.422, 0.399), (0.434,0.403), (0.426, 0.386), (0.415, 0.381).
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 7
CSM-360 - Product Datasheet
Optical and Electrical Characteristics (TJ = 25 C)
Cool White
Drive Condition1 Parameter Current Density Symbol j VF-min Forward Voltage VF VF-max 3.15A Typical Values at Indicated Current2 0.35 11.00 13.14 17.60 14.15 V 6.3 A Values at Test Currents 0.70 Unit A/mm2
Common Characteristics
Symbol Viewing Angle Emitting Area Emitting Area Dimensions Forward Voltage Temperature Coefficient3 21/2 Values 115 36.0 6x6 -3.07 Unit degrees mm2 mmxmm mV/C
Absolute Maximum Ratings
Symbol Maximum Current4 Maximum Reverse Current Maximum Junction Temperature5 Storage Temperature Range
Note 1:
Values 6.3 Not Allowed
Unit A A C C
Tj max
150 -40/+100
Note 2: Note 3: Note 4:
Note 5: Note 6: Note 7: Note 8:
Listed drive conditions are typical for common applications. PhlatLight CSM-360 devices can be driven at currents ranging from <1 A to 6.3 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. Unless otherwise noted, values listed are typical. Forward voltage temperature coefficient at 3.15A. Contact Luminus for value at other drive conditions Luminus PhlatLight CSM-360-W LEDs are designed for operation to an absolute maximum forward drive current of 6.3 A. Product lifetime data is specified at recommended forward drive currents. Sustained operation at absolute maximum currents willresult in a reduction of device lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the reliability application Note for further information. In pulsed operation, rise time from 1090% of forward current should be larger than 0.5 microseconds. Lifetime dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure lifetime. See reliability application note for further information. CIE measurement uncertainty for white devices is estimated to be +/- 0.01. Special design considerations must be observed for operation under 1 A. Please contact Luminus for further information. Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 8
CSM-360 - Product Datasheet
Relative Luminous Flux vs. Forward Current (TJ = 25C)
200% 180% Relative Luminous Flux (%) 160% 140% 120% 100% 80% 60% 40% 20% 0% 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
1
6.5
Forward Current (A)
Forward Current vs. Forward Voltage (TJ = 25C)
6.5 6 5.5 5 Forward Current (A) 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Forward Voltage (V)
1.
Yellow squares indicate typical operating conditions.
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 9
CSM-360 - Product Datasheet
Relative Luminous Flux vs. Junction Temperature (IF = 3.15A)
100% 90% Relative Luminous Flux (%) 80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction Temperature (C)
Typical Relative Spectral Power (TJ = 25C)
100% Relative Spectral Power Distribution (%) 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 400 450 500 550 600 650 700 750 Wavelength (nm) 6500K CCT 4500K CCT 3000K CCT
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 10
CSM-360 - Product Datasheet
Typical Polar Radiation Pattern
-30
30
-60
60
-120%
-100%
-80%
-60%
-40%
-20%
0%
20%
40%
60%
80%
100%
120%
Typical Angular Radiation Pattern
100% 90% 80% Relative Intensity (%) 70% 60% 50% 40% 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement (degrees)
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 11
CSM-360 - Product Datasheet
Thermal Resistance
Typical Thermal Resistance
Rj-b1 Rb-hs1 Rj-hs
2
0.77 C/W 0.13 C/W 0.90 C/W 0.69 C/W
Rj-ref1
Note 1:
Note 2: Ths definition = 3 mm from core-board
Thermal resistance values are based on FEA model results correlated to measured Rj-hs data Thermal resistance is measured using eGraf 1205 thermal interface
Thermistor Information
The thermistor used in PhlatLight devices mounted on coreboards is from Murata Manufacturing Co. The global part number is NCP15XH103J03RC. Please see http://www.murata.com/ for details on calculating thermistor temperature.
Electrical Pinout
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 12
CSM-360 - Product Datasheet
Mechanical Dimensions
DIMENSIONS IN MILLIMETERS
2x 3.4 FASTENER HOLES 5.50
36.00.5 27.95 27.06 A
+0.06 3.00 0.00 ALIGNMENT HOLE 3.18
B
10.76 11.24 +0.06 3.00 0.00 ALIGNMENT HOLE 36.00.5 14.1
16.00
51
5.61 .221
A
27.5 "A" "B" "C"
SECTION A-A
DETAIL B
DIMENSION NAME "A" "B" "C"
DESCRIPTION TOP OF SUBSTRATE TO TOP OF LENS EMITTING AREA TO TOP OF SUBSTRATE BOTTOM OF COREBOARD TO TOP OF LENS
NOMINAL DIMENSION 8.74 0.39 11.91
TOLERANCE 0.35 0.05 0.50
Recommended connector for Anode and Cathode: Panduit Disco LokTM Series P/N: DNG14-250FL-C Thermistor Connector: MOLEX P/N 53780-0270. Recommended Female: MOLEX P/N 51146-0200 or equivalent For detailed drawing please refer to DWG-001365 document
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 13
CSM-360 - Product Datasheet
Ordering Information
Ordering Part Number1,2,3
CSM-360-WDLS-D22-GT150 CSM-360-WCLS-D22-GT350 CSM-360-WWTM-D22-GR550 CSM-360-WWRM-D22-GR750
Note 1:
Color
6500K White 5700K White 5000K White 4500K White 4000K White 3500K White 3000K White 2700K White
Description
White PhlatLight CSM-360 consisting of four 9 mm2 LEDs wired in series, thermistor, and connector, mounted on a copper-core PCB. White PhlatLight CSM-360 consisting of four 9 mm2 LEDs wired in series, thermistor, and connector, mounted on a copper-core PCB. White PhlatLight CSM-360 consisting of four 9 mm2 LEDs wired in series, thermistor, and connector, mounted on a copper-core PCB. White PhlatLight CSM-360 consisting of four 9 mm2 LEDs wired in series, thermistor, and connector, mounted on a copper-core PCB.
Note 2: Note 3:
GT150 - denotes a bin kit comprising of all flux and chromaticity bins at the 6500K and 5700K color points GT350 - denotes a bin kit comprising of all flux and chromaticity bins at the 5000K and 4500K color points GR550 - denotes a bin kit comprising of all flux and chromaticity bins at the 4000K and 3500K color points GR750 - denotes a bin kit comprising of all flux and chromaticity bins at the 3000K and 2700K color points See PDS-001393: PhlatLight Binning and Labeling document for more information. For ordering information on all available bin kits, please see PDS-001393: PhlatLight Binning and Labeling document. Standard packaging increment (SPI) is 10.
www.luminus.com
The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices' product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. PhlatLight(R) is a registered trademark of Luminus Devices, Inc., all rights reserved.
This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059; Patents Pending in the U.S. and other countries.
(c) 2010 Luminus Devices, Inc. - All Rights Reserved Page 14

▲Up To Search▲

Price & Availability of CSM-360-W57S-D22-GV201

	To Download CSM-360-W57S-D22-GV201 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .