 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HIGH STABILITY THROUGH HOLE CLOCK OSCILLATORS FEATURES COST EFFECTIVE MPU CLOCK TOLERANCE AND STABILITY TO 5 PPM CUSTOM SPECIFICATIONS SPECIFICATIONS FREQUENCY RANGE FREQUENCY STABILITY OVER TEMPERATURE RANGE (REF. TO25C) SERIES CX21, CX22, AND CX23 1.00 MHz TO 100.00 MHz 5 PPM TO 50 PPM MAX AT VCC = +5.0 VDC (SEE TABLE 1) 0C TO +50C (NARROW) 0C TO +70C (STANDARD) -40C TO +85C (EXTENDED) AT VCC = +5.0VDC AND STANDARD LOAD (SEE TABLE 1) -40C TO +85C 4 PPM MAX FOR THE FIRST YEAR AND 20 PPM MAX FOR 10 YEARS TTL, HCMOS, OR ACMOS NORMAL: 40/60% TIGHT: 45/55% (OPTION) 3 PPM MAX FOR 10% VARIATION AT VCC = +5.0 VDC AT 25C +5.0 VDC 5% (3.3 VDC AVAILABLE) CONTROL PIN 1: HIGH OR OPEN (+2.0 VDC MIN)OUTPUT PIN 8: ENABLED CONTROL PIN 1: LOW OR GROUND (+0.8 VDC MIN)OUTPUT PIN 8: DISABLED (HIGH Z) 5 PPM MAX FOR 5% VARIATION AT VCC = +5.0 VDC AND STANDARD LOAD AT 25C 50 mA MAX AT VCC = +5.0 VDC AND STANDARD LOAD AT 25C OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE AGING CHARACTERISTICS OUTPUT WAVEFORM OPTIONS SYMMETRY FREQUENCY STABILITY OVER LOAD VARIATION SUPPLY VOLTAGE ENABLE/DISABLE FUNCTION FREQUENCY STABILITY OVER SUPPLY VOLTAGE VARIATION SUPPLY CURRENT OUTLINE DRAWING Scale none Dimension in MARKING AREA TEMPERATURE RANGE DESIGNATIONS mm inch TABLE 1 CODE A TEMPERATURE RANGE 0C TO +50C 0C TO +50C 0C TO +50C 0C TO +50C 0C TO +50C 0C TO +70C 0C TO +70C 0C TO +70C 0C TO +70C 0C TO +70C 0C TO +70C -40C TO +85C -40C TO +85C -40C TO +85C -40C TO +85C -40C TO +85C TEMPERATURE STABILITY 5 PPM 10 PPM 15 PPM 20 PPM 25 PPM 10 PPM 15 PPM 20 PPM 25 PPM 35 PPM 50 PPM 20 PPM 25 PPM 30 PPM 35 PPM 50 PPM 7.62 0.5 .300 .020 COLORED DOT INDICATES PIN 1 LOCATION B PIN CONNECTION CO2 PIN 1 4 FUNCTION N/C GROUND OUTPUT VCC CE2 .031 .003 C D E F G H I J K L M .250 .020 6.35 0.5 0.45 .076 DIA .018 .003 DIA 0.79 .08 5 8 7.62 .127 .300 .005 PIN 1 PIN 4 PIN 1 4 FUNCTION E/D GROUND OUTPUT VCC 7.62 .127 .300 .005 12.50 MAX .492 MAX 5 8 PIN 8 12.50 0.5 .492 .020 PIN 5 O P PHASE NOISE CHARACTERISTICS 0 -20 -40 -60 dBc -80 -100 -120 -140 -160 10 Hz 100 Hz 1 KHz Offset from carrier 10 KHz -70 -95 -120 -140 -150 Q MECHANICAL CHARACTERISTICS MECHANICAL SHOCK IEC-68-2-27 TEST EA, 30g FOR 18 ms HALFSINE VIBRATION THERMAL SHOCK SEAL SOLDERING HEAT MECHANICAL 100 KHz IEC 68-2-6 (TEST FC) 0.35 mm, 5g, 10-2 kHz, 6 CYCLES AXIS IEC 68-2-14 (TEST NA), 30 min IN EACH TEMPERATURE EXTREME IEC 68-2-17 (TEST QC) IEC 68-2-20A 14 PIN DIP, LEADED, PER OUTLINE DRAWING PART NUMBERING SYSTEM SERIES CO2 CE2 1 2 3 OUTPUT TTL HCMOS ACMOS CODE A THROUGH M FREQUENCY IN MHz SYMMETRY T (45/55%) EXAMPLE: CO22L-20.000-T HCMOS OUTPUT 50 PPM OVER 0 C TO +70 C TIGHT SYMMETRY Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A. Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com |
Price & Availability of CE22A-100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |