View STP13NK60ZFP_632794.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB13NK60ZT4, STP13NK60Z STP13NK60ZFP, STW13NK60Z
N-channel 600 V, 0.48 13 A, TO-220, TO-220FP, D2PAK , TO-247 Zener-protected SuperMESHTM Power MOSFET
Features
Type STB13NK60ZT4 STP13NK60ZFP STP13NK60Z STW13NK60Z

VDSS 600 V 600 V 600 V 600 V
RDS(on) max <0.55 <0.55 <0.55 <0.55
ID 13 A 13 A 13 A 13 A
Pw 150 W 35 W 150 W 150 W
2 1 3
3 1
TO-247
DPAK
Gate charge minimized Very low intrinsic capacitances Very good manufacturing repeatability
1 2 3
1 3 2
TO-220 Figure 1.
TO-220FP
Application
Internal schematic diagram
Switching applications
Description
The SuperMESHTM series is obtained through an extreme optimization of ST's well established strip-based PowerMESHTM layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications.
Table 1.
Device summary
Marking B13NK60Z P13NK60ZFP P13NK60Z W13NK60Z Package DPAK TO-220FP TO-220 TO-247 Packaging Tape and reel Tube Tube Tube
Order codes STB13NK60ZT4 STP13NK60ZFP STP13NK60Z STW13NK60Z
April 2009
Doc ID 8527 Rev 7
1/18
www.st.com 18
Contents
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 4 5 6
Test circuits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
Doc ID 8527 Rev 7
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Electrical ratings
1
Electrical ratings
Table 2. Absolute maximum ratings
Value Symbol Parameter TO-220 / TO-247 DPAK VDS VGS ID ID IDM (2) PTOT Drain-source voltage (VGS = 0) Gate-source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25 C Derating factor Vesd(G-S) G-S ESD (HBM C=100pF, R=1.5 k) dv/dt (3) VISO Tj Tstg Peak diode recovery voltage slope Insulation withstand voltage (AC) Operating junction temperature Storage temperature --55 to 150 13 8.2 52 150 1.20 4000 4.5 2500 600 30 13 (1) 8.2 (1) 52(1) 35 0.27 Unit TO-220FP V V A A A W W/C V V/ns V C
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 13 A, di/dt 200 A/s, VDD V(BR)DSS, TJ TJMAX
Table 3.
Thermal data
Value
Symbol
Parameter
TO-220 TO-247
Unit DPAK TO-220FP 3.6 60 62.5 300 -C/W C/W C/W C
Rthj-case
Thermal resistance junction-case max --
0.83
Rthj-pcb (1) Thermal resistance junction-pcb max Rthj-amb Tl Thermal resistance junction-amb max Maximum lead temperature for soldering purpose
1. When mounted on minimum footprint
Doc ID 8527 Rev 7
3/18
Electrical ratings
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Table 4.
Symbol IAR EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or notrepetitive (pulse width limited by Tj max) Single pulse avalanche energy (starting Tj=25 C, ID=IAR, VDD= 50 V) Max value 10 400 Unit A mJ
4/18
Doc ID 8527 Rev 7
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Electrical characteristics
2
Electrical characteristics
(TCASE = 25 C unless otherwise specified) Figure 2.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1 mA, VGS= 0 VDS = Max rating, VDS = Max rating,Tc=125 C VGS = 20 V VDS= VGS , ID = 100 A VGS= 10 V, ID= 4.5 A 3 3.75 0.48 Min. 600 1 50
10
Typ.
Max.
Unit V A A A V
4.5 0.55
Table 5.
Symbol gfs (1) Ciss Coss Crss Coss eq.(2) Qg Qgs Qgd
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =8 V, ID = 5 A Min. Typ. 11 2030 210 48 125 66 11 33 92 Max. Unit S pF pF pF pF nC nC nC
VDS =25 V, f=1 MHz, VGS=0
-
VGS=0, VDS =0 to 480 V VDD=480 V, ID = 10 A VGS =10 V (see Figure 21)
-
-
1. Pulsed: pulse duration = 300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS
Doc ID 8527 Rev 7
5/18
Electrical characteristics
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Table 6.
Symbol td(on) tr td(off) tf tr(Voff) tf tc
Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Off-voltage rise time Fall time Cross-over time Test conditions VDD= 300 V, ID= 5 A, RG=4.7 , VGS=10 V (see Figure 20) VDD=300 V, ID= 5 A, RG=4.7 , VGS=10 V (see Figure 20) VDD=480 V, ID= 10 A, RG=4.7 , VGS=10 V (see Figure 20) Min. Typ. 22 14 61 12 10 9 20 Max. Unit ns ns ns ns ns ns ns
-
-
-
-
-
-
Table 7.
Symbol BVGSO
Gate-source Zener diode
Parameter Gate-source breakdown voltage Test conditions Igs=1mA (open drain) Min. 30 Typ. Max. Unit V
The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device's ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated Zener diodes thus avoid the usage of external components. Table 8.
Symbol ISD ISDM
(1)
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 10 A, VGS=0 ISD= 10 A, di/dt = 100 A/s, VDD=35 V, Tj=150 C Test conditions Min. Typ. Max. 10 40 1.6 570 4.5 16 Unit A A V ns C A
-
VSD (2) trr Qrr IRRM
-
1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300s, duty cycle 1.5%
6/18
Doc ID 8527 Rev 7
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Electrical characteristics
2.1
Figure 3.
Electrical characteristics (curves)
Safe operating area for TO-220/ DPAK Figure 4. Thermal impedance for TO-220/ DPAK
Figure 5.
Safe operating area for TO-220FP
Figure 6.
Thermal impedance for TO-220FP
Figure 7.
Safe operating area for TO-247
Figure 8.
Thermal impedance for TO-247
Doc ID 8527 Rev 7
7/18
Electrical characteristics Figure 9. Output characteristics
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP Figure 10. Transfer characteristics
Figure 11. Transconductance
Figure 12. Static drain-source on resistance
Figure 13. Gate charge vs gate-source voltage Figure 14. Capacitance variations
8/18
Doc ID 8527 Rev 7
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP Figure 15. Normalized gate threshold voltage vs temperature
Electrical characteristics Figure 16. Normalized on resistance vs temperature
Figure 17. Source-drain diode forward characteristics
Figure 18. Normalized BVDSS vs temperature
Figure 19. Maximum avalanche energy vs temperature
Doc ID 8527 Rev 7
9/18
Test circuits
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
3
Test circuits
Figure 21. Gate charge test circuit
Figure 20. Switching times test circuit for resistive load
Figure 22. Test circuit for inductive load Figure 23. Unclamped inductive load test switching and diode recovery times circuit
Figure 24. Unclamped inductive waveform
Figure 25. Switching time waveform
10/18
Doc ID 8527 Rev 7
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
Doc ID 8527 Rev 7
11/18
Package mechanical data
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
12/18
Doc ID 8527 Rev 7
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Package mechanical data
TO-220FP mechanical data
Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.80 2.9 15.90 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.40 10 16 30.6 10.60 3.6 16.40 9.30 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1.00 1.50 1.50 5.20 2.70 10.40 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
A
B
L3 L6 L7
Dia
F1
D
F
G1 H
F2
L2 L5
E
123
L4
7012510-I
Doc ID 8527 Rev 7
G
13/18
Package mechanical data
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
TO-247 Mechanical data
mm. Min. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 14.80 4.30 Typ Max. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75
Dim. A A1 b b1 b2 c D E e L L1 L2 oP oR S
14/18
Doc ID 8527 Rev 7
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Package mechanical data
DPAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
Doc ID 8527 Rev 7
15/18
Packing mechanical data
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
5
Packing mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
16/18
Doc ID 8527 Rev 7
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Revision history
6
Revision history
Table 9.
Date 20-Sep-2005 05-Oct-2005 29-Feb-2008 15-Apr-2009
Document revision history
Revision 4 5 6 7 Inserted ECOPACK(R) indication VISO parameter on Table has been updated Order codes in Table 1: Device summary has been changed Changes
Doc ID 8527 Rev 7
17/18
STB13NK60ZT4, STx13NK60Z, STP13NK60ZFP
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
18/18
Doc ID 8527 Rev 7

▲Up To Search▲

Price & Availability of STP13NK60ZFP

	To Download STP13NK60ZFP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .