 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 14 Pin DIP and SMD 5 Tap Low-Profile TTL Compatible Active Delay Lines Compatible with standard auto-insertable equipment and can be used in either infrared or vapor phase process. Delays are 5% or 2 nS Tap Total 5, 10, 15, 20 6, 12, 18, 24 7, 14, 21, 28 8, 16, 24, 32 9, 18, 27, 36 10, 20, 30, 40 12, 24, 36, 48 15, 30, 45, 60 20, 40, 60, 80 25, 50, 75, 100 30, 60, 90, 120 35, 70, 105, 140 Whichever is greater. 25 30 35 40 45 50 60 75 100 125 150 175 DIP Part Number EP8200-HL EP8213-HL EP8214-HL EP8215-HL EP8216-HL EP8201-HL EP8211-HL EP8217-HL EP8202-HL EP8219-HL EP8203-HL EP8220-HL SMD Part Number EPA073HL-25 EPA073HL-30 EPA073HL-35 EPA073HL-40 EPA073HL-45 EPA073HL-50 EPA073HL-60 EPA073HL-75 EPA073HL-100 EPA073HL-125 EPA073HL-150 EPA073HL-175 Delays are 5% or 2 nS Tap Total 40, 80, 120, 160 45, 90, 135, 180 50, 100, 150, 200 60, 120, 180, 240 70, 140, 210, 280 80, 160, 240, 320 84, 168, 252, 336 88, 176, 264, 352 90, 180, 270, 360 84, 188, 282, 376 100, 200, 300, 400 200 225 250 300 350 400 420 440 450 470 500 DIP Part Number EP8204-HL EP8221-HL EP8205-HL EP8206-HL EP8207-HL EP8208-HL EP8218-HL EP8222-HL EP8209-HL EP8223-HL EP8210-HL SMD Part Number EPA073HL-200 EPA073HL-225 EPA073HL-250 EPA073HL-300 EPA073HL-350 EPA073HL-400 EPA073HL-420 EPA073HL-440 EPA073HL-450 EPA073HL-470 EPA073HL-500 Delay times referenced from input to leading edges at 25C, 5.0V, with no load. DC Electrical Characteristics Parameter Test Conditions VOH VOL VIK IIH IIL IOS High-Level Output Voltage Low-Level Output Voltage Input Clamp Voltage High-Level Input Current Low-Level Input Current Short Circuit Output Current Schematic Min Max Unit 0.5 -1.2 50 1.0 -2 -100 V V V A mA mA mA ICCH High-Level Supply Current ICCL Low-Level Supply Current TRO Output Rise Time NH NL Fanout High-Level Output Fanout Low-Level Output VCC = min. V IL = max. I OH = max 2.7 VCC = min. VIH = min. I OL= max VCC = min. II = IIK VCC = max. VIN = 2.7V VCC = max. VIN = 5.25V VCC = max. VIN = 0.5V VCC = max. VOUT = 0. -40 (One output at a time) VCC = max. VIN = OPEN VCC = max. VIN = 0 Td 500 nS (0.75 to 2.4 Volts) Td > 500 nS VCC = max. VOH = 2.7V VCC = max. VOL = 0.5V 14 VCC 12 4 10 6 8 OUTPUT INPUT 1 75 mA 75 mA 4 nS 5 nS 20 TTL LOAD 10 TTL LOAD 7 GROUND Recommended Operating Conditions VCC VIH VIL IIK IOH IOL PW* d* TA Supply Voltage High-Level Input Voltage Low-Level Input Voltage Input Clamp Current High-Level Output Current Low-Level Output Current Pulse Width of Total Delay Duty Cycle Operating Free-Air Temperature Input Pulse Test Conditions @ 25 C Min 4.75 2.0 Unit 3.2 110 2.0 1.0 100 5.0 Volts % nS MHz KHz Volts Max 5.25 0.8 -18 -1.0 20 Unit V V V mA mA mA % % C EIN PW TRI PRR VCC Pulse Input Voltage Pulse Width % of Total Delay Pulse Rise Time (0.75 - 2.4 Volts) Pulse Repetition Rate @ Td 200 nS Pulse Repetition Rate @ Td > 200 nS Supply Voltage 40 0 40 +70 *These two values are inter-dependent. SMD Package PCA EPA073HL-25 Date Code .300 .200 .200 DIP Package White Dot Pin#1 .200 PCA EP8201-HL Date Code .300 .280 Max. .400 Max. .280 Max. Suggested Solder Pad Layout .055 .410 .100 .300 .03 .780 Max. .200 Max. .020 Typ. .020 Min. .010 Typ. .780 Max. .165 Max. .02 DSD82XXHL & DSA073HL .01 Typ. .100 Rev. A 2/5/96 .050 .300 .125 .01 .365 Max. QAF-CSO1 Rev. B 8/25/94 Unless Otherwise Noted Dimensions in Inches Tolerances: Fractional = 1/32 .XX = .030 .XXX = .010 ELECTRONICS INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 TEL: (818) 892-0761 FAX: (818) 894-5791 |
Price & Availability of EP8203-HL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |