 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com FTR-C1 Series ULTRA MINIATURE RELAY SIGNAL RELAY FTR-C1 Series s FEATURES q q q q Dimensions of large contact gap relay Height: 9.3 mm maximum (THT) 9.65 mm maximum (SMT) Length: 15 mm maximum Width: 7.5 mm maximum Conforms to IEC60950 / EN60950 / UL1950/ C22.2 No.950 spacing & high breakdown voltage Clearance: 2.0 mm ( coil and contacts) Creepage: 2.5 mm ( coil and contacts) HIGH RELIABILITY .com Bifurcated contacts Low power consumption 280 mW (latching type 140mW) DataShee s ORDERING INFORMATION [Example] (a) (b) FTR-C1 (a) Series Name Terminal Appearance C A 012 G * (b) (c) (d) (e) FTR-C1 C: Through hole type G: Surface mount type A: Standard Type B: Single coil latching type Nominal Voltage G: Silver alloy (c) (d) (e) Operation Function Coil Number Contact Material Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking FTR-C1CA03G C1CA03G * If ordering tape and reel package, please add "B05" after the partnumber (tape and reel is only available for SMT type, example: FTR-C1GA003G-B05 .com 1 DataSheet 4 U .com www..com FTR-C1 Series s COIL DATA CHART Standard type Model THT FTR-C1(C)(A)003-G SMT FTR-C1(G)(A)003-G 3 VDC 4.5 VDC 5 VDC 12VDC 24VDC Nominal Voltage Coil Resistance (10%) 32.1 72.3 89.3 514 1920 Must Operate Voltage 2.25 VDC Must Release Voltage 0.3 VDC Nominal Operating Power (10%) 280 mW 280 mW 280 mW 280 mW 300 mW FTR-C1(C)(A)04.5-G FTR-C1(G)(A)04.5-G FTR-C1(C)(A)005-G FTR-C1(C)(A)012-G FTR-C1(C)(A)024-G FTR-C1(G)(A)005-G FTR-C1(G)(A)012-G FTR-C1(G)(A)024-G 3.38 VDC 0.45 VDC 3.75 VDC 9.00 VDC 18.0 VDC 0.5 VDC 1.2 VDC 2.4 VDC Note: All values in the table are measured at 20C. Single coil latching type Model THT FTR-C1(C)(B)003-G SMT FTR-C1(C)(B)003-G Coil Nominal Resistance Voltage (10%) .com 3 VDC 4.5 VDC 5 VDC 12VDC 24VDC 64 Nominal Operating Power (10%) 140 mW 140 mW 140 mW 140 mW 180 mW t4U.com Set Voltage Reset Voltage DataShee 2.25 VDC 2.25 VDC 3.38 VDC 3.38 VDC 3.75 VDC 3.75 VDC 9.00 VDC 9.00 VDC 18.0 VDC 18.0 VDC FTR-C1(C)(B)04.5-G FTR-C1(C)(B)04.5-G FTR-C1(C)(B)005-G FTR-C1(C)(B)012-G FTR-C1(C)(B)024-G FTR-C1(C)(B)005-G FTR-C1(C)(B)012-G FTR-C1(C)(B)024-G 145 179 1029 3200 Note: - All values in the table are measured at 20C. - Single coil latching type is applying to the standard now. .com 2 D a t a 4 U .h ce oe m S t www..com FTR-C1 Series s SPECIFICATIONS Item Arrangement Material Resistance (initial) Contact Max. Switching Power Max. Switching Voltage Max. Switching Current Operating Temperature Coil Max. Allowable Voltage Operate Time Time Value Release Time (without diode) Resistance (at 500 VDC) Max. 10ms (at nominal voltage, without bounce) Min. 1,000M ohmS 1,500VAC, 1 minute 1,500VAC, 1 minute 3,000VAC, 1 minute 2,500V (at 2/10 microsec) 2,500V (at 2/10 microsec) 5,000V (at 2/10 microsec) 10x106 operations min. (at 10Hz) 100x103 operations min. at 1A, 30VDC, 0.5Hz 100x103 operations min. at 0.1A, 48VDC, 0.5Hz 100x103 operations min. at 0.3A, 125VDC, 0.5Hz 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm Min. 500 m/s2 Min. 1,000 m/s2 0.3A 125 VAC 1A 30VDC 0.3 110VDC Supplementary Insulation 250 V 2 2.0 mm (between coil and contacts) 2.5 mm (between coil and contacts) 3 FTR-C1CA ( )G FTR-C1GA ( )G 2 Form C Silver alloy Max. 100m ohm (at 1A 6VDC) 37.5AV / 30W 250VAC, 220 VDC 1A -40 C to + 85 C (no frost) 150% nominal voltage (at 20 C) Max. 10ms (at nominal voltage, without bounce) t4U.com Dieelectric Strenght Insulation Between open contacts Between adjacent contacts Between coil and contacts Between open contacts Surge Strength Between adjacent contacts Between coil and contacts Mechanical Life Electrical (resistive load) Misoperation Endurance Misoperation Endurance Contact Rating Insulation Class IEC060950 UL1950 C22.2 No.950 EN60950 Working Voltage Pollution Degree Clearance Creepage Distance DataShee .com Vibration Resistance Shock Resistance UL / CSA .com D a 4U. a c S o h me t e t www..com FTR-C1 Series s DIMENSIONS AND SCHEMATICS Through hole type Polarity Bar Japan 0031K 15 max. 7.5 max. F.T. C1CA003G t4U.com 9.35 Max. DataShee .com (1.1) 5.08 0.2 2.540.2 2.540.2 (1.16) 5.08 0.2 s TERMINAL DESIGNATIONS Standard type (Bottom view de-energized position) s RECOMMENDED MOUNTING PAD (1.16) 8-o0.8 +0.1 -0.05 5 (+) 1 3 4 3.5 Unit: mm (-) 12 Polarity Bar 10 9 8 (1.1) 5.08 0.1 2.540.1 2.540.1 Single Coil Latching type (Bottom view reset position) (+) (-) 1 3 4 5 S shows the polarity of set positin R shows the polarity of reset position SR .com (+)..(+) 12 Polarity Bar 10 9 8 5.08 0.1 Unit: mm 4 DataSheet 4 U .com www..com FTR-C1 Series s DIMENSIONS AND SCHEMATICS Surface mount type Polarity Bar Japan 0031K 15 max. 7.5 max. F.T. C1GA003G t4U.com 9.65 Max. 0.2+0.3 DataShee (1.1) 5.08 0.2 2.540.2 2.540.2 .com 32 5.08 0.2 9+0.3 Unit: mm s TERMINAL DESIGNATIONs 2.73 0.1 Standard type (Top view de-energized position) s RECOMMENDED MOUNTING PAD 10.1 10.1 10.1 (-) 12 10 9 8 (+) 1 Polarity Bar 3 5 4 2.73 0.1 Single Coil Latching type (Bottom view reset position) 5.08 0.1 2.540.1 2.540.1 (-) (+) 12 10 9 8 SR S shows the polarity of set positin R shows the polarity of reset position .com (+) (-) 1 Polarity Bar 3 5 4 7.020.1 Unit: mm 5 DataSheet 4 U .com www..com FTR-C1 Series s RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) IRS (Infrared Reflow Soldering) Note: Temperature (C) T3 T2 T1 preheating soldering T 3 = 245C max. T 2 = 200C max. cooling T 1 = 165C max. 1.Temperature profiles show the temperature of PC board surface. 2. Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. 0 120 sec maximum 30 sec Max. s PACKAGING Packaging method (only tape packaging is available) 1. Taping standards: JIS C 0806 and RC-10092B (EIAJ) 2. Reel type: TB2416 or TB2416 Orientation Mark side 3. Reel type: RD24D .com 4. Quantity of 1 reel: 500 pieces Tape Dimensions: 0.4 11.50.1 1.750.1 t4U.com Feeding DataShee o1.5+0.1 -0 o2.2 4 0.1 17.1 21.05 10.7 12.5 160.1 20.1 Reel Dimensions: 20.5 o130.5 o210.8 .com 240.3 o370 25.5+0.1 MAX. 2.0 Unit: mm 6 DataSheet 4 U .com www..com FTR-C1 Series Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components International Headquarter Offices (c) 2003 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 02/12/2003 t4U.com .com .com 7 DataSheet 4 U .com |
Price & Availability of FTR-C1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |