View UPC2710T-E3_378003.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1.5 GHz SILICON MMIC UPC2710T WIDE-BAND AMPLIFIER
FEATURES
* FREQUENCY RESPONSE: 1.5 GHz * HIGH GAIN: 33 dB GAIN vs. FREQUENCY
35
* INTERNAL CURRENT REGULATION MINIMIZES GAIN CHANGE OVER TEMPERATURE * 5 V SINGLE SUPPLY VOLTAGE * SUPER SMALL PACKAGE * TAPE AND REEL PACKAGING OPTION AVAILABLE
Gain, GS (dB)
* SATURATED OUTPUT POWER: +13.5
30
25
20 0 0.5 1.0 1.5
Frequency, f (GHz)
DESCRIPTION
The UPC2710T is a Silicon Monolithic integrated circuit manufactured using the NESAT III process. This device is suitable for applications which require high gain and wide-band operation. It is designed for low cost gain stages in cellular radios, GPS receivers, DBS tuners, PCN, and test/measurement equipment. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance.
ELECTRICAL CHARACTERISTICS (TA = 25 C, f = 0.5 GHz, VCC = 5 V)
PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS fU GS PSAT P1dB NF RLIN RLOUT ISOL GT RTH PARAMETERS AND CONDITIONS Circuit Current (no signal) Small Signal Gain Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 0.1 GHz) Gain Flatness, f = 0.1 ~ 0.6 GHz f = 0.1 0.8 GHz Saturated Output Power Output Power at 1dB Compression Point Noise Figure Input Return Loss Output Return Loss Isolation Gain -Temperature Coefficient Thermal Resistance (Junction to Ambient) UNITS mA dB GHz dB dBm dBm dB dB dB dB dB/C C/W 3 9 34 11 MIN 16 30 0.7 UPC2710T T06 TYP 22 33 1.0 0.8 13.5 7.5 3.5 6 12 39 -0.006 200 5 MAX 29 36.5
California Eastern Laboratories
UPC2710T ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS VCC PIN PT TOP TSTG PARAMETERS Supply Voltage Input Power Power Dissipation Operating Temperature Storage Temperature UNITS V dBm mW C C RATINGS 6 +10 2802 -40 to +85 -55 to +150
VCC 1000 pF
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC PARAMETER Supply Voltage UNITS V MIN 4.5 TYP MAX 5.0 5.5
TEST CIRCUIT
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85C).
50 IN 1000 pF C1 1
C3 1000 nH 6
* *L
C2 50 OUT 1000 pF
4 2, 3, 5
TYPICAL PERFORMANCE CURVES (TA = 25C)
CIRCUIT CURRENT vs. VOLTAGE
40 35
CIRCUIT CURRENT vs. TEMPERATURE
40 35
Circuit Current, ICC (mA)
30 25 20 15 10 5
Circuit Current, ICC (mA)
0 1 2 3 4 5 6
30 25 20 15 10 5
0
0 -60 -40 -20 0 20 40 60 80 100
Supply Voltage, VCC (V)
Operating Temperature, TOP (C)
NOISE FIGURE AND INSERTION GAIN vs. FREQUENCY
35 6 VCC = 5.5 V
RETURN LOSS vs. FREQUENCY
0 VCC = 5.0 V
Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB)
Insertion Power Gain, GP (dB)
RLIN -10
VCC = 4.5 V 30 NF VCC = 5.5 V
5
Noise Figure, NF (dB)
Gp
VCC = 5.0 V
RLOUT -20
-30
4 VCC = 4.5 V VCC = 5.0 V
-40
25 0.1 0.3 1.0 2.0
3
-50 0.1
0.3
1.0
2.0
Frequency, f (GHz)
Frequency, f (GHz)
UPC2710T TYPICAL PERFORMANCE CURVES (TA = 25 C)
ISOLATION vs. FREQUENCY
0 VCC = 5.0V -10
POWER vs. FREQUENCY
20
15 PSAT
x
Isolation, ISOL (dB)
-20
Power (dBm)
10 P1dB 5
-30
-40
0
-50 0.1 0.3 1.0 2.0
-5 0 0.5 1.0 1.5 2.0
Frequency, f (GHz)
Frequency, f (GHz) X: Typical SSB Third Order Intercept Point
OUTPUT POWER vs. INPUT POWER AND VOLTAGE
20 VCC = 5.5 V f = 0.5 GHz 15
OUTPUT POWER vs. INPUT POWER AND TEMPERATURE
20 15 VCC = 5.0 V f = 0.5 GHZ TA = 85 C
Output Power, POUT (dBm)
10 VCC = 5.0 V 5 VCC = 4.5 V 0
Output Power, POUT (dBm)
10 TA = -45 C TA = 25 C 5 0
-5 -10 -15 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10
-5
-10 -15 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10
Input Power, PIN (dBm)
Input Power, PIN (dBm)
NOISE FIGURE vs. FREQUENCY
6
Noise Figure, NF (dB)
5
4
3
2 0 0.5 1.0 1.5
Frequency, f (GHz)
UPC2710T TYPICAL SCATTERING PARAMETERS (TA = 25 C)
UPC2710T VCC = 5 V, ICC = 22 mA
FREQUENCY (GHz) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 S11 MAG 0.322 0.346 0.383 0.429 0.465 0.486 0.487 0.468 0.423 0.392 0.349 0.301 0.257 0.217 0.184 ANG -0.3 3.3 2.1 -1.7 -9.4 -17.8 -27.2 -36.5 -44.5 -50.3 -56.6 -61.0 -63.2 -63.5 -59.9 MAG 37.7 38.8 40.2 41.6 42.1 42.3 41.1 39.1 35.4 32.9 30.0 26.8 23.8 21.1 18.8 S21 ANG -5.9 -17.0 -28.0 -40.4 -54.1 -68.3 -83.2 -97.9 -111.7 -123.4 -135.5 -146.8 -156.8 -165.9 -174.2 MAG 0.013 0.012 0.009 0.009 0.012 0.013 0.013 0.013 0.013 0.014 0.014 0.015 0.016 0.016 0.017 S12 ANG 17.1 19.8 22.5 25.1 27.8 30.5 33.1 35.8 38.5 41.2 43.9 46.6 49.2 51.6 54.5 S22 MAG ANG 0.200 0.208 0.231 0.258 0.273 0.305 0.319 0.320 0.297 0.260 0.240 0.216 0.192 0.173 0.155 -11.7 -15.4 -23.5 -34.2 -47.2 -60.9 -77.8 -96.2 -115.4 -128.2 -142.2 -156.3 -169.7 176.0 162.3 K1 1.06 1.07 1.21 1.10 0.86 0.79 0.82 0.89 1.04 1.10 1.22 1.31 1.40 1.56 1.65 S21 (dB) 31.5 31.8 32.1 32.4 32.5 32.5 32.3 31.9 31.0 30.4 29.6 28.6 27.5 26.5 25.5
Note: 1. K factor calculations:
2 2 2 K = 1 + | | - |S11| - |S22| , = S11 S22 - S21 S12 2 |S12 S21|
UPC2710T EQUIVALENT CIRCUIT
VCC
OUT
IN
GND
PACKAGE OUTLINE (Units in mm)
PACKAGE OUTLINE T06
+0.2 2.8 -0.3 +0.2 1.5 -0.1
LEAD CONNECTIONS
(Top View) (Bottom View)
3
4
4
3
C1F
2
5
5
2
1
2.90.2 3 0.95 4
6
6
1
1.90.2 2 0.95
5
1. INPUT 2. GND 3. GND
-0.05 0.3 +0.10
4. OUTPUT 5. GND 6. VCC
1
6
RECOMMENDED P.C.B. LAYOUT (Units in mm)
3.10
+0.2 1.1 -0.1
0.8
0.130.1
0 to 0.1
Note: All dimensions are typical unless otherwise noted.
3 4 0.95
ORDERING INFORMATION
PART NUMBER UPC2710T-E3 QTY 3K/Reel
2
5
1
6 0.5 MIN
1.0 MIN
1.0 MIN
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM 11/97 DATA SUBJECT TO CHANGE WITHOUT NOTICE

▲Up To Search▲

Price & Availability of UPC2710T-E3

	To Download UPC2710T-E3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .