View UPC2712T-E3_378938.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

UPC2709T, UPC2712T
2.5 GHz SILICON MMIC WIDE-BAND AMPLIFIER
FEATURES
* WIDE FREQUENCY RESPONSE: 2.5 GHz * HIGH GAIN: 23 dB (UPC2709T) * SATURATED OUTPUT POWER: +11.5 dBm (UPC2709T)
30
GAIN vs. FREQUENCY
25
* 5 V SINGLE SUPPLY VOLTAGE * SUPER SMALL PACKAGE * TAPE AND REEL PACKAGING OPTION AVAILABLE
Gain, Gs (dB)
* INTERNAL CURRENT REGULATION MINIMIZES GAIN CHANGE OVER TEMPERATURE
UPC2709
20 UPC2712
15
DESCRIPTION
10
NEC's UPC2709T and UPC2712T are Silicon Monolithic integrated circuits manufactured using the NESAT III process. These devices are suitable as buffer amplifiers for wide-band applications. They are designed for low cost gain stages in cellular radios, GPS receivers, DBS tuners, PCN, and test/ measurement equipment. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance.
0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency, f (GHz)
ELECTRICAL CHARACTERISTICS (TA = 25C, f = 1 GHz, VCC = 5
PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS fU GS PSAT P1dB NF RLIN RLOUT ISOL GT RTH PARAMETERS AND CONDITIONS Circuit Current (no signal) Small Signal Gain Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 0.1 GHz) Gain Flatness, f = 0.1 ~ 1.8 GHz f = 0.1 ~ 2.0 GHz Saturated Output Power Output Power at 1 dB Compression Point Noise Figure Input Return Loss Output Return Loss Isolation Gain -Temperature Coefficient Thermal Resistance (Junction to Ambient) UNITS mA dB GHz dB dBm dBm dB dB dB dB dB/C C/W
V) UPC2709T T06 MIN 19 21 2.0 TYP 25 23 2.3 1.0 9 11.5 7.5 5 7 7 26 10 10 31 -0.002 200 6.5 9 10 28 0 MAX 32 26.5 MIN 9 18 2.2 UPC2712T T06 TYP 12 20 2.6 0.8 3 -2.5 4.5 12 13 33 -0.003 200 6 MAX 15 23.5
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Date Published: June 28, 2005
UPC2709T, UPC2712T
ABSOLUTE MAXIMUM RATINGS1
SYMBOLS VCC ICC PARAMETERS Supply Voltage Total Circuit Current UPC2709T UPC2712T Input Power Power Dissipation2 Operating Temperature Storage Temperature (TA = 25C) RATINGS 6 60 30 +10 280 -40 to +85
1000 pF
UNITS V mA mA dBm mW C C
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC PARAMETER Supply Voltage UNITS V MIN 4.5 TYP MAX 5.0 5.5
PIN PT TOP TSTG
TEST CIRCUIT
VCC
-55 to +150
C3 300 nH 6 50 IN 1000 pF C1 1 2, 3, 5 4 1000 pF C2 50 OUT L
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85C).
*UPC2709T only
TYPICAL PERFORMANCE CURVES
(TA = 25C) CIRCUIT CURRENT vs. OPERATING TEMPERATURE
40 VCC = 5.0 V 35
CIRCUIT CURRENT vs. VOLTAGE
40 35
Circuit Current, ICC (mA)
30 25 UPC2709T 20 15 10 UPC2712T 5 0 0 1 2 3 4 5 6
Circuit Current, ICC (mA)
30 UPC2709T 25 20 15 10 5 0 -60 -40 -20 0 20 40 60 80 100 UPC2712T
Supply Voltage, VCC (V)
Operating Temperature, C
UPC2709T GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE
30 5.0 V 8
UPC2712T GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE
30
VCC = 5.5 V 25
25
10 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V 8
4.5 V
Noise Figure, NF (dB)
Gain, GS (dB)
Gain, GS (dB)
GP 20
20 VCC = 5.0 V 5.5 V 15
6
15 NF 10 VCC = 4.5 V
6
5
VCC = 5.5 V
VCC = 5.0 V
4
4.5 V 10 0.1 0.3 1.0 3.0 4
5 0.1 0.3 1.0 3.0
2
Frequency, f (GHz)
Frequency, f (GHz)
Noise Figure, NF (dB)
7
UPC2709T, UPC2712T
TYPICAL PERFORMANCE CURVES (TA = 25C)
UPC2709T INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY
0 VCC = 5.0 V
0
UPC2712T INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY
VCC = 5.0 V
Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB)
-10
Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB)
RLIN -10
-20
RLIN
RLOUT
RLOUT -20
-30
-30
-40
-50
-40
0.1
0.3
1.0
3.0
0.1
0.3
1.0
3.0
Frequency, f (GHz)
Frequency, f (GHz)
UPC2709T ISOLATION vs. FREQUENCY
0 VCC = 5.0 V
UPC2712T ISOLATION vs. FREQUENCY
0 VCC = 5.0 V -10
-10
Isolation, ISOL (dB)
Isolation, ISOL (dB)
-20
-20
-30
-30
-40
-40
-50 0.1 0.3 1.0 3.0
-50 0.1 0.3 1.0 3.0
Frequency, f (GHz)
Frequency, f (GHz)
UPC2709T POWER vs. FREQUENCY
20
15
UPC2712T POWER vs. FREQUENCY
X
15
X
PSAT
X
10
X
X
Power (dBm)
Power (dBm)
10 P1dB 5
5
X
PSAT 0
P1dB
0 VCC = 5.0 V -5 0 0.5 1.0 1.5 2.0 2.5
-5 VCC = 5.0 V -10 0 0.5 1.0 1.5 2.0 2.5
Frequency, f (GHz) X: Typical SSB Third Order Intercept Point
Frequency, f (GHz) X: Typical SSB Third Order Intercept Point
UPC2709T, UPC2712T
TYPICAL PERFORMANCE CURVES
(TA = 25C)
UPC2709T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE
15 VCC = 5.0 V f = 1.0 GHz 10
UPC2712T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE
10 5 VCC = 5.0 V f = 1.0 GHz TA = +85 C 0 TA = +25 C -5 -10 TA = -40 C
Output Power, POUT (dBm)
TA = 25C 5 TA = -40 C 0 TA = 85C
-5
-10
Output Power, POUT (dBm)
-15 -20
-15 -20 -35
-30
-25
-20
-15
-10
-5
0
5
10
-25 -40 -35
-30
-25
-20
-15
-10
-5
0
5
Input Power, PIN (dBm) UPC2709T OUTPUT POWER vs. INPUT POWER AND VOLTAGE
15 10
10
Input Power, PIN (dBm) UPC2712T OUTPUT POWER vs. INPUT POWER AND VOLTAGE
f = 1.0 GHz 5
f = 1.0 GHz VCC = 5.5 V VCC = 5.0 V
Output Power, POUT (dBm)
Output Power, POUT (dBm)
VCC = 5.5 V
5 VCC = 4.5 V 0 -5 -10
0 VCC = 5.0 V VCC = 4.5 V
-5
-10
-15 -20 -25 -45 -40
-15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 10
-35 -30
-25
-20 -15 -10
-5
0
5
Input Power, PIN (dBm)
Input Power, PIN (dBm)
UPC2709T, UPC2712T
TYPICAL SCATTERING PARAMETERS UPC2709T VCC = 5 V, ICC = 25 mA
FREQUENCY (GHz) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 S11 MAG 0.258 0.261 0.266 0.271 0.272 0.275 0.277 0.278 0.279 0.279 0.279 0.276 0.271 0.263 0.255 0.246 0.238 0.237 0.232 0.222 0.209 0.194 0.184 0.176 0.173 ANG -4.1 -2.9 -3.4 -4.6 -6.8 -8.1 -10.4 -12.7 -14.0 -15.2 -18.1 -20.7 -23.3 -25.6 -26.9 -28.6 -30.2 -31.7 -33.1 -33.6 -34.4 -33.1 -30.3 -26.8 -23.2 MAG 12.7 12.8 12.9 13.0 13.1 13.3 13.5 13.6 13.7 13.8 13.9 14.0 13.9 13.8 13.6 13.2 12.7 12.3 11.7 11.0 10.3 9.7 9.0 8.4 7.8 S21 ANG -3.7 -12.2 -19.6 -27.0 -34.2 -41.3 -49.2 -57.4 -65.7 -72.3 -81.1 -90.3 -99.8 -109.3 -118.5 -128.3 -138.0 -147.5 -157.2 -166.1 -174.3 177.5 169.5 162.0 154.8 MAG 0.022 0.024 0.025 0.025 0.026 0.026 0.026 0.026 0.026 0.027 0.027 0.027 0.027 0.027 0.027 0.028 0.029 0.030 0.030 0.031 0.032 0.033 0.034 0.034 0.035 S12 ANG 7.5 3.1 6.3 6.5 5.6 10.5 9.9 11.0 11.8 15.6 15.8 17.7 16.7 19.2 20.4 20.6 21.6 27.9 31.0 33.2 34.6 35.8 36.1 38.5 39.2 MAG 0.234 0.240 0.251 0.260 0.272 0.288 0.303 0.312 0.319 0.324 0.328 0.332 0.332 0.326 0.314 0.302 0.282 0.254 0.226 0.198 0.168 0.143 0.114 0.089 0.065 S22 ANG -4.6 -6.9 -9.6 -13.5 -17.9 -22.1 -28.6 -33.5 -38.4 -43.4 -51.2 -59.0 -67.1 -75.1 -82.5 -90.6 -98.9 -106.8 -113.6 -120.8 -126.7 -132.5 -137.7 -144.4 -150.6 K1 1.66 1.52 1.45 1.42 1.36 1.32 1.29 1.27 1.25 1.20 1.19 1.19 1.20 1.22 1.25 1.27 1.30 1.33 1.40 1.47 1.54 1.61 1.69 1.81 1.90 S21 (dB) 22.1 22.1 22.2 22.3 22.3 22.5 22.6 22.7 22.7 22.8 22.9 22.9 22.9 22.8 22.7 22.4 22.1 21.8 21.4 20.8 20.3 19.7 19.1 18.5 17.8 (TA = 25C)
UPC2712T VCC = 5 V, ICC = 12 mA
FREQUENCY (GHz) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 2.60 2.70 2.80 2.90 3.00 S11 MAG 0.262 0.261 0.260 0.258 0.257 0.255 0.254 0.252 0.250 0.248 0.246 0.240 0.236 0.232 0.224 0.218 0.210 0.201 0.190 0.180 0.173 0.169 0.161 0.157 0.156 0.156 0.159 0.164 0.168 0.172 ANG -9.3 -12.3 -17.0 -21.9 -27.1 -32.0 -38.1 -41.9 -46.5 -51.0 -57.5 -62.5 -67.8 -72.4 -77.7 -82.1 -86.2 -89.3 -93.5 -96.9 -98.4 -101.3 -100.3 -100.0 -99.4 -100.0 -98.4 -101.7 -100.1 -101.1 MAG 9.3 9.4 9.5 9.6 9.8 9.9 10.0 10.2 10.3 10.4 10.6 10.6 10.7 10.8 10.8 10.9 10.9 10.7 10.5 10.3 10.0 9.7 8.8 8.4 7.7 7.3 6.8 6.5 5.8 5.5 S21 ANG -6.4 -17.4 -27.7 -37.5 -46.9 -56.4 -65.7 -75.9 -86.0 -96.4 -106.4 -117.7 -128.9 -140.6 -152.7 -164.9 -177.6 169.5 156.4 143.7 129.8 119.3 107.2 95.8 84.9 75.4 64.5 56.1 47.0 36.2 MAG 0.021 0.022 0.022 0.023 0.024 0.024 0.025 0.026 0.026 0.027 0.028 0.028 0.029 0.030 0.031 0.031 0.032 0.033 0.033 0.034 0.035 0.035 0.036 0.037 0.037 0.038 0.038 0.039 0.039 0.040 S12 ANG -1.6 -3.3 -5.1 -6.8 -8.5 -10.2 -12.0 -13.7 -15.4 -17.2 -18.9 -20.6 -22.3 -24.1 -25.8 -27.5 -29.3 -31.0 -32.7 -34.4 -36.2 -37.9 -39.6 -41.3 -43.1 -44.8 -46.5 -48.3 -50.0 -51.7 MAG 0.071 0.078 0.091 0.110 0.128 0.146 0.166 0.181 0.194 0.204 0.212 0.221 0.235 0.244 0.247 0.246 0.240 0.234 0.221 0.210 0.187 0.169 0.156 0.134 0.125 0.118 0.108 0.110 0.122 0.136 S22 ANG 7.8 7.2 6.4 4.3 -1.1 -6.8 -14.9 -22.9 -32.7 -40.5 -50.9 -59.7 -70.9 -81.3 -94.4 -106.3 -119.4 -131.5 -143.3 -159.0 -173.4 167.5 151.8 132.8 114.0 89.8 65.4 50.2 32.2 15.6 2.46 2.33 2.29 2.16 2.05 2.01 1.90 1.80 1.77 1.69 1.62 1.60 1.54 1.48 1.44 1.44 1.42 1.42 1.46 1.46 1.48 1.54 1.63 1.69 1.80 1.85 2.00 2.02 2.21 2.28 K1 S21 (dB) 19.3 19.5 19.6 19.7 19.8 19.9 20.0 20.1 20.3 20.4 20.5 20.5 20.6 20.6 20.7 20.7 20.7 20.6 20.4 20.3 20.0 19.7 18.9 18.4 17.8 17.3 16.6 16.2 15.3 14.8
Note: 1. K factor calculations:
2 2 2 K = 1 + | | - |S11| - |S22| , = S11 S22 - S21 S12 2 |S12 S21|
UPC2709T, UPC2712T
EQUIVALENT CIRCUIT
UPC2709T
VCC
UPC2712T
VCC
OUT
OUT
IN
IN
GND
GND
OUTLINE DIMENSIONS
(Units in mm)
LEAD CONNECTIONS
(Top View) (Bottom View)
UPC2709T/UPC2712T PACKAGE OUTLINE T06
+0.2 2.8 -0.3 +0.2 1.5 -0.1
3
4
4
C1E
3
2
5
5
2
2.90.2
3 0.95
4
1
6
6
1
1.90.2 2 0.95
5
1. INPUT 2. GND 3. GND
-0.05 0.3 +0.10
4. OUTPUT 5. GND 6. VCC
1
6
Note: Package Markings CIE-UPC2709T CIH-UPC2712T
+0.2 1.1 -0.1
0.8
0.130.1
0 to 0.1
Note: All dimensions are typical unless otherwise specified.
UPC2709T, UPC2712T
ORDERING INFORMATION (Solder Contains Lead)
PART NUMBER UPC2709T-E3 UPC2712T-E3 Embossed Tape, 8 mm wide. QTY 3K/Reel 3K/Reel
3 4 0.95
RECOMMENDED P.C.B. LAYOUT
3.10
(Units in mm)
2
ORDERING INFORMATION (Pb-Free)
PART NUMBER UPC2709T-E3-A UPC2712T-E3-A Embossed Tape, 8 mm wide. QTY 3K/Reel 3K/Reel
1.0 MIN 1.0 MIN 1
5
6 0.5 MIN
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPC2712T-E3

	To Download UPC2712T-E3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .