 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Low Current LTL1CHJxDNN LTL2F7JxDNN LTL2R3JxDNN 60 degree 60 degree 45 degree Features ! ! ! ! ! ! ! Low Power Consumption. High Efficiency. CMOS-MOS Compatible. TTL Compatible. Wide Viewing Angle. Choice of Package. Choice of Color Description These tinted diffuse LED lamps are designed and optimized specifically for low DC current operation. Luminous intensity and forward voltage are tested at 2mA to assure consistent brightness at TTL output current level. Application ! ! ! ! Low Power DC Circuits. Telecommunications Indicators. Portable Equipment. Keyboard Indicators. Devices Part No. (LTL) 1CHJDDNN / 2F7JDDNN / 2R3JDDNN 1CHJRDNN / 2F7JRDNN / 2R3JRDNN 1CHJEDNN / 2F7JEDNN / 2R3JEDNN 1CHJFDNN / 2F7JFDNN / 2R3FDNN www..com 1CHJYDNN / 2F7JYDNN / 2R3JYDNN 1CHJSDNN / 2F7JSDNN / 2R3JSDNN 1CHJGDNN / 2F7JGDNN / 2R3JGDNN Lens Red Diffused Red Diffused Red Diffused Amber Diffused Yellow Diffused Yellow Diffused Green Diffused Source Color AlInGap Hyper Red AlInGap Super Red AlInGap Red AlInGap Yellow Orange AlInGap Amber Yellow AlInGap Yellow AlInGap Green !" Notes: www..com 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. !" Absolute Maximum Ratings at TA=25C Hyper Red Super Red Yellow Orange Amber Yellow Parameter Red Yellow Green Unit Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Derating Linear From 70C Reverse Voltage(IR =100 A) Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm(.063") From Body] 75 75 75 75 75 75 75 mW 90 90 90 60 60 60 60 mA 30 0.4 5 30 0.4 5 30 0.4 5 30 0.4 5 30 0.4 5 30 0.4 5 30 0.4 5 mA mA / C V -40C to + 100C -55C to + 100C 260 for 5 Seconds www..com !" Electrical / Optical Characteristics at TA=25 (F Series) Parameter Symbol Part No. (LTL) 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN 1CHJDDNN 1CHJRDNN 1CHJEDNN 1CHJFDNN 1CHJYDNN 1CHJSDNN 1CHJGDNN Min. 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Typ. 5.0 5.6 7.2 7.2 7.2 7.2 7.2 60 650 639 632 611 595 588 575 639 632 624 605 592 587 572 20 20 20 17 15 15 15 1.8 1.8 1.8 1.8 1.8 1.8 1.8 40 Max. Unit Test Condition Luminous Intensity Iv IF = 2mA mcd Note 1 Note 2 Viewing Angle 2 1/2 deg Note 3 (Fig.5) Peak Emission Wavelength P nm Measurement @ peak (Fig.1) Dominant Wavelength d nm Note 5 Spectral Line Half-Width nm Forward Voltage VF 2.4 2.3 2.4 2.4 2.4 2.4 2.4 100 V IF = 2mA Reverse Current Capacitance IR C A pF VR = 5V VF = 0, f = 1 MHz www..com NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Luminous intensity rank classified products support two ranks. 3. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 4. Iv classification code is marked on each packing bag. 5. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. " !" Electrical / Optical Characteristics at TA=25 (H Series) Parameter Symbol Part No. (LTL) 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN 2F7JDDNN 2F7JRDNN 2F7JEDNN 2F7JFDNN 2F7JYDNN 2F7JSDNN 2F7JGDNN Min. 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Typ. 5.0 5.6 7.2 7.2 7.2 7.2 7.2 60 650 639 632 611 595 588 575 639 632 624 605 592 587 572 20 20 20 17 15 15 15 1.8 1.8 1.8 1.8 1.8 1.8 1.8 40 Max. Unit Test Condition Luminous Intensity Iv IF = 2mA mcd Note 1 Note 2 Viewing Angle 2 1/2 deg Note 3 (Fig.5) Peak Emission Wavelength P nm Measurement @ peak (Fig.1) Dominant Wavelength d nm Note 5 Spectral Line Half-Width nm Forward Voltage VF 2.4 2.3 2.4 2.4 2.4 2.4 2.4 100 V IF = 2mA Reverse Current Capacitance IR C A pF VR = 5V VF = 0, f = 1 MHz www..com NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Luminous intensity rank classified products support two ranks. 3. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 4. Iv classification code is marked on each packing bag. 5. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. !" # Electrical / Optical Characteristics at TA=25 (H Series) Parameter Symbol Part No. (LTL) 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN 2R3JDDNN 2R3JRDNN 2R3JEDNN 2R3JFDNN 2R3JYDNN 2R3JSDNN 2R3JGDNN Min. 3.8 3.8 3.8 3.8 3.8 3.8 3.8 Typ. 7.2 8.0 10.6 10.6 10.6 10.6 10.6 45 650 639 632 611 595 588 575 639 632 624 605 592 587 572 20 20 20 17 15 15 15 1.8 1.8 1.8 1.8 1.8 1.8 1.8 40 Max. Unit Test Condition Luminous Intensity Iv IF = 2mA mcd Note 1 Note 2 Viewing Angle 2 1/2 deg Note 3 (Fig.5) Peak Emission Wavelength P nm Measurement @ peak (Fig.1) Dominant Wavelength d nm Note 5 Spectral Line Half-Width nm Forward Voltage VF 2.4 2.3 2.4 2.4 2.4 2.4 2.4 100 V IF = 2mA Reverse Current Capacitance IR C A pF VR = 5V VF = 0, f = 1 MHz NOTES: www..com 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Luminous intensity rank classified products support two ranks. 3. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 4. Iv classification code is marked on each packing bag. 5. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. !" $ Typical Electrical / Optical Characteristics Curves (25 Ambient Temperature Unless Otherwise Noted) www..com !" |
Price & Availability of LTL1CHJSDNN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |