Part Number Hot Search : 
BR106 SHST03 KID65001 MCP4911 N80C541 22200 C660A RU75170S
Product Description
Full Text Search
 

To Download CPH6303 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Ordering number:ENN6395A
P-Channel Silicon MOSFET
CPH6303
Ultrahigh-Speed Switching Applications
Features
* Low ON resistance. * Ultrahigh-speed switching. * 2.5V drive.
Package Dimensions
unit:mm 2151A
[CPH6303]
0.2
0.05 2.9 6 5 4 0.15
0.6
1 2 3 0.95
0.6
1.6
2.8
0.4
1 : Drain 2 : Drain 3 : Gate 4 : Source 5 : Drain 6 : Drain SANYO : CPH6
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1%
Mounted on a ceramic board (900mm2x0.8mm)
Conditions
0.7 0.9
0.2
Ratings -20 10 -4 -16 1.6 2.0 150 -55 to +150
Unit V V A A W W
C C
Mounted on a FR4 board, PW5s
Electrical Characteristics at Ta = 25C
Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Symbol V(BR)DSS IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 ID=-1mA, VGS=0 VDS=-20V, VGS=0 VGS=8V, VDS=0 VDS=-10V, ID=-1mA VDS=-10V, ID=-2A ID=-2A, VGS=-4V ID=-1A, VGS=-2.5V -0.4 3.5 6.0 70 100 90 130 Conditions Ratings min -20 -1 10 -1.4 typ max Unit V A A V S m m
Marking : JC
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
60100TS (KOTO) TA-2104, 2886 No.6395-1/4
CPH6303
Continued from preceding page.
Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD VDS=-10V, f=1MHz VDS=-10V, f=1MHz VDS=-10V, f=1MHz See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit VDS=-10V, VGS=-10V, ID=-4A VDS=-10V, VGS=-10V, ID=-4A VDS=-10V, VGS=-10V, ID=-4A IS=-4A, VGS=0 Conditions Ratings min typ 820 150 100 17 60 66 56 17 1.5 2 -0.85 -1.5 max Unit pF pF pF ns ns ns ns nC nC nC V
Switching Time Test Circuit
VDD=--10V VIN 0V --4V VIN PW=10s D.C.1% ID=--2A RL=5
D
VOUT
G
P.G
50
CPH6303
S
--10 .0V --6. 0V --4 .0V --3 .0 V
--6
ID -- VDS
.5V
--6
ID -- VGS
VDS=--10V
--5
--5
Drain Current, ID - A
--2
--4
. --2
0V
Drain Current, ID - A
--4
--3
--3
VGS=--1.5V
--1
75 Ta =
0 --0.5 --1.0
--1
C
25
--1.5
0 0
0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 IT00392 200 --2.0 --2.5 IT00393
Drain-to-Source Voltage, VDS - V
200
Gate-to-Source Voltage, VGS - V
RDS(on) -- VGS
Ta=25C Static Drain-to-Source On-State Resistance, RDS (on) - m
RDS(on) -- Ta
Static Drain-to-Source On-State Resistance, RDS (on) - m
150
150
ID=--1.0A
100
--2.0A
100
.0A =--1 , ID 2.5V =-VGS --2.0A V, I D= =--4.0 V GS
50
50
0 0
--1
--2
--3
--4
--5
--6
--7
--8
--9
--10
0 --60
--40
--20
0
20
40
60
C
80 100
--25 C
--2
--2
120
140 160 IT00395
Gate-to-Source Voltage, VGS - V
IT00394
Ambient Temperature, Ta - C
No.6395-2/4
CPH6303
Forward Transfer Admittance, | yfs | - S
100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT00396 --10 --9
yfs -- ID
VDS=--10V
--10 7 5 3 2
IF -- VSD
VGS=0
Forward Current, IF - A
75C
C --25 Ta=
25 C
--1.0 7 5 3 2 --0.1 7 5 3 2
--0.01 7 5 3 2 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0
--0.001
Drain Current, ID - A
Diode Forward Voltage, VSD - V
--25
C
Ta 25 =75 C C
IT00397
10000 7 5 3 2
Ciss, Coss, Crss -- VDS
f=1MHz
Gate-to-Source Voltage, VGS - V
VGS -- Qg
VDS=--10V ID=--4A
--8 --7 --6 --5 --4 --3 --2 --1
Ciss, Coss, Crss - pF
1000 7 5 3 2 100 7 5 3 2 10 0 --2 --4 --6 --8
Ciss
Coss
Crss
--10
--12
--14
--16
--18
--20
0
0
2
4
6
8
10
12
14
16
18
Drain-to-Source Voltage, VDS - V
1000 7 5
IT00398 --100 7 5 3 2
Total Gate Charge, Qg - nC
IT00399
SW Time -- ID
VDD=--10V VGS=--4V
tr
ASO
IDP=--16A ID=--4A <10s
1m s
Switching Time, SW Time - ns
3 2 100 7 5 3 2 10 7 5 3 2 1.0 --0.1 2 3 5 7 2 3 5 7
Drain Current, ID - A
td(off)
--10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2
100s
10
DC op era
tf
10 m s 0m s
td(on)
tio n Operation in this area is limited by RDS(on)
Ta=25C Single Pulse
Drain Current, ID - A
--1.0
--10 IT00400
--0.01 --0.01 2 3
Mounted on a ceramic board (900mm2x0.8mm)
5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 23
Drain-to-Source Voltage, VDS - V
5 7--100 IT00401
2.0
PD -- Ta
Allowable Power Dissipation, PD - W
1.6 1.5
M
ou
nt
ed
on
ac
er
1.0
am
ic
bo
ar
d(
90
0m
0.5
m2 x0
.8m
m
)
140 160
0 0 20 40 60 80 100 120
Ambient Temperature, Ta - C
IT00402
No.6395-3/4
CPH6303
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of June, 2000. Specifications and information herein are subject to change without notice.
PS No.6395-4/4


▲Up To Search▲   

 
Price & Availability of CPH6303

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X