View HLMP-C223-MN000_485724.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

T-13/4 Super Ultra-Bright LED Lamps Technical Data
HLMP-C115 HLMP-C117 HLMP-C215 HLMP-C315 HLMP-C415 HLMP-C515 HLMP-C615
HLMP-C123 HLMP-C223 HLMP-C323 HLMP-C423 HLMP-C523 HLMP-C623
Features
* Very High Intensity * Exceptional Uniformity * Microtint Lens for Color Identification * Consistent Viewability All Colors: AlGaAs Red High Efficiency Red Yellow Orange Green Emerald Green * 15 and 25 Family * Tape and Reel Options Available * Binned for Color and Intensity
Applications
* Ideal for Backlighting Front Panels* * Used for Lighting Switches * Adapted for Indoor and Outdoor Signs
Description
These non-diffused lamps are designed to produce a bright light source and smooth radiation pattern. A slight tint is added to the lens for easy color identification. This lamp has been designed with a 20 mil lead frame, enhanced
flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment.
2
Selection Guide
Color DH AS AlGaAs 21/2[1] 15 Standoff Leads No Part Number HLMPC115 C115-O00xx C115-OP0xx C117-OP0xx C123 C123-L00xx C215 C215-M00xx C215-MN0xx C223 C223-L00xx C223-MN0xx C315 C315-L00xx C315-LM0xx C323 C323-K00xx C323-KL0xx C415 C415-M00xx C415-M0D0xx C415-MN0xx C423 C423-L00xx C423-LM0xx C515 C515-L00xx C515-LM0xx C523 C523-J00xx C523-KL0xx C615 C615-G00xx C623 C623-E00xx Luminous Intensity Iv (mcd) Min. Max. 290.0 - 290.0 - 290.0 1000.0 290.0 1000.0 90.2 - 90.2 - 138.0 - 138.0 - 138.0 400.0 90.2 - 90.2 - 138.0 400.0 147.0 - 147.0 - 147.0 424.0 96.2 - 96.2 - 96.2 294.0 138.0 - 138.0 - 138.0 - 138.0 400.0 90.2 - 90.2 - 90.2 276.0 170.0 - 170.0 170.0 490.0 69.8 - 69.8 - 111.7 340.0 17.0 - 17.0 - 6.7 - 6.7 -
25 Red 15
Yes No No
25
No
Yellow
15
No
25
No
Orange
15
No
25
No
Green
15
No
25
No
Emerald Green
15 25
No No
3
Part Numbering System
HLMP - C x xx - x x x xx Mechanical Options 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads B2: Right Angle Housing, Even Leads UQ: Ammo Pack, Horizontal Leads Color Bin Options 0: Full Color Bin Distribution D: Color Bins 4 & 5 only Maximum Iv Bin Options 0: Open (No Maximum Limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle & Standoffs Options 15: 15 Degree, without Standoffs 17: 15 Degree, with Standoffs 23: 25 Degree, without Standoffs Color Options 1. AS AlGaAs Red 2. High Efficiency Red 3. Yellow 4. Orange 5. Green 6. Emerald Green Package Options C: T-1 3/4 (5 mm)
4
Package Dimensions
5.00 0.20 (NOTE 1) (0.197 0.008) 8.71 0.20 (0.343 0.008) 1.14 0.20 (0.045 0.008)
5.00 0.20 (0.197 0.008) 8.71 0.20 (0.343 0.008)
12.60 0.18 (0.496 0.007)
1.85 (0.073) MAX. 0.70 (0.028) MAX.
31.60 MIN. (1.244)
1.14 0.20 (0.045 0.008) 1.50 0.15 (0.059 0.006) 0.70 (0.028) MAX.
31.60 MIN. (1.244)
CATHODE LEAD
CATHODE LEAD
1.00 MIN. (0.039)
0.50 0.10 SQ. TYP. (0.020 0.004)
1.00 MIN. (0.039)
0.50 0.10 SQ. TYP. (0.020 0.004)
5.80 0.20 (0.228 0.008) CATHODE FLAT 2.54 0.38 (0.100 0.015) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEADS ARE MILD STEEL, SOLDER DIPPED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT 0.5 mm (0.020 in.) DOWN THE LEADS.
CATHODE FLAT
5.80 0.20 (0.228 0.008) 2.54 0.38 (0.100 0.015)
HLMP-Cx15 and HLMP-Cx23
HLMP-Cx17
Absolute Maximum Ratings at TA = 25C
DH AS AlGaAs Red 30 500 5 110 -20 to +100 High Efficiency Red and Orange 30 500 5 110 High Performance Green and Emerald Green 30 500 5 110 -20 to +100
Parameter DC Forward Transient Forward Current [2] (10 sec Pulse) Reverse Voltage (Ir = 100 A) LED Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] Current[1]
Yellow 20 500
Units mA mA V C C C
5 110 -55 to +100 -55 to +100 260C for 5 seconds
Notes: 1. See Figure 5 for maximum current derating vs. ambient temperature. 2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.
5
Electrical Characteristics at TA = 25C
Forward Voltage Vf (Volts) @ If = 20 mA Typ. Max. 1.8 2.2 Reverse Breakdown Vr (Volts) @ Ir = 100 A Min. 5 Capacitance C (pF) Vf = 0 f = 1 MHz Typ. 30 Thermal Resistance RJ-PIN (C/W) 210 Speed of Response s (ns) Time Constant e-t/s Typ. 30
Part Number HLMP-C115 HLMP-C117 HLMP-C123 HLMP-C215 HLMP-C223 HLMP-C315 HLMP-C323 HLMP-C415 HLMP-C423 HLMP-C515 HLMP-C523 HLMP-C615 HLMP-C623
1.9 2.1 1.9 2.2 2.2
2.6 2.6 2.6 3.0 3.0
5 5 5 5 5
11 15 4 18 18
210 210 210 210 210
90 90 280 260 260
Optical Characteristics at TA = 25C
Luminous Intensity Iv (mcd) @ 20 mA[1] Min. Typ. 290 600 90 138 90 146 96 138 90 170 69 17 6 200 300 170 300 170 300 170 300 170 45 27 Peak Wavelength peak (nm) Typ. 645 Color, Dominant Wavelength d[2] (nm) Typ. 637 Viewing Angle 21/2 (Degrees)[3] Typ. 11 26 17 23 17 25 17 23 20 28 20 28 Luminous Efficacy v (lm/w) 80
Part Number HLMP-C115 HLMP-C117 HLMP-C123 HLMP-C215 HLMP-C223 HLMP-C315 HLMP-C323 HLMP-C415 HLMP-C423 HLMP-C515 HLMP-C523 HLMP-C615 HLMP-C623
635 583 600 568 558
626 585 602 570 560
145 500 380 595 656
Notes: 1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 21/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
6
1.0
EMERALD GREEN HIGH PERFORMANCE GREEN
ORANGE
TS AlGaAs RED DH As AlGaAs RED
TA = 25 C
RELATIVE INTENSITY
HIGH EFFICIENCY RED
0.5
YELLOW
0 500
550
600
650
700
750
WAVELENGTH - nm
Figure 1. Relative Intensity vs. Wavelength.
HIGH EFFICIENCY RED, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN
IF - FORWARD CURRENT - mA
IF - FORWARD CURRENT - mA
300.0 200.0 DH As AlGaAs RED 100.0 TS AlGaAs RED 50.0 20.0 10.0 5.0 2.0 1.0 0.5 0.2 0.1 0
100 HIGH PERFORMANCE GREEN, EMERALD GREEN HIGH EFFICIENCY RED/ORANGE YELLOW
80
60
40
20
0.5
1.0
1.5
2.0
2.5
3.0 3.5
0
0
1.0
2.0
3.0
4.0
5.0
VF - FORWARD VOLTAGE - V
VF - FORWARD VOLTAGE - V
Figure 2. Forward Current vs. Forward Voltage (Non-resistor Lamp).
5.0
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN 1.6
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
2.0 1.0 0.5 0.2 0.1 0.05 0.02 0.01 0.1 0.2 0.5 1 2 5 10 20 30 50 TS AlGaAs RED DH As AlGaAs RED
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30
IF - DC FORWARD CURRENT - mA
IDC - DC CURRENT PER LED - mA
Figure 3. Relative Luminous Intensity vs. Forward Current.
7
DH As AlGaAs RED 1.2
HER, ORANGE, YELLOW, HIGH PERFORMANCE GREEN, EMERALD GREEN 1.3
PEAK - RELATIVE EFFICIENCY (NORMALIZED AT 20 mA)
YELLOW
EMERALD GREEN
RELATIVE EFFICIENCY (NORMALIZED AT 20 mA)
1.0 0.8 0.6 0.4 0.2 0
1.2 1.1 1.0 0.9
HIGH PERFORMANCE GREEN HIGH EFFICIENCY RED/ORANGE
0.8 0.7 0.6 0.5 0.4 0 10 20 30 40 50 60 70 80 90
0
10
20
50
100
200 300
IPEAK - PEAK FORWARD CURRENT - mA
IPEAK - PEAK FORWARD CURRENT - mA
Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.
DH As AlGaAs RED 40
IF - FORWARD CURRENT - mA
HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN 40
IF - FORWARD CURRENT - mA
35 30 25 20 15 10 5 0 0 20 40 60 80 100 RJA = 559 C/W RJA = 689 C/W
35 30 25 20
HER, ORANGE, GREEN, EMERALD GREEN RJA = 470 C/W RJA = 300 C/W YELLOW
15 10 5 0 0 20 RJA = 705 C/W
40
60
80
100
TA - AMBIENT TEMPERATURE - C
TA - AMBIENT TEMPERATURE - C
Figure 5. Maximum Forward dc Current vs. Ambient Temperature. Derating Based on TjMAX = 110 C
NORMALIZED LUMINOUS INTENSITY
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45
ANGULAR DISPLACEMENT - DEGREES
Figure 6. Relative Luminous Intensity vs. Angular Displacement. 15 Degree Family.
8
NORMALIZED LUMINOUS INTENSITY
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45
ANGULAR DISPLACEMENT - DEGREES
Figure 7. Relative Luminous Intensity vs. Angular Displacement. 25 Degree Family.
Intensity Bin Limits
Color Bin L M N O P Q R S T U V W X Y Z L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 173.2 250.0 250.0 360.0 360.0 510.0 510.0 800.0 800.0 1250.0 1250.0 1800.0 1800.0 2900.0 2900.0 4700.0 4700.0 7200.0 7200.0 11700.0 11700.0 18000.0 18000.0 27000.0
Red/Orange
Yellow
9
Intensity Bin Limits, continued
Color Bin E F G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 7.6 12.0 12.0 19.1 19.1 30.7 30.7 49.1 49.1 78.5 78.5 125.7 125.7 201.1 201.1 289.0 289.0 417.0 417.0 680.0 680.0 1100.0 1100.0 1800.0 1800.0 2700.0 2700.0 4300.0 4300.0 6800.0 6800.0 10800.0 10800.0 16000.0 16000.0 25000.0 25000.0 40000.0
Green/ Emerald Green
Maximum tolerance for each bin limit is 18%.
Color Categories
Color Category # 6 5 4 3 2 1 3 2 4 5 1 2 3 4 5 6 7 8 Lambda (nm) Min. Max. 561.5 564.5 564.5 567.5 567.5 570.5 570.5 573.5 573.5 576.5 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 593.0 597.0 599.5 599.5 602.0 602.0 604.5 604.5 607.5 607.5 610.5 610.5 613.5 613.5 616.5 616.5 619.5
Green
Yellow
Orange
Tolerance for each bin limit is 0.5 nm.
10
Mechanical Option Matrix
Mechanical Option Code 00 01 02 B2 UQ Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, crimped leads, minimum increment 1300 pcs/bag Tape & Reel, straight leads, minimum increment 1300 pcs/bag Right Angle Housing, even leads, minimum increment 500 pcs/bag Ammo Pack, horizontal leads, in 1K minimum increment
Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information.
www.semiconductor.agilent.com Data subject to change. Copyright (c) 2001 Agilent Technologies, Inc. September 17, 2001 Obsoletes 5965-6165E 5988-2149EN

▲Up To Search▲

Price & Availability of HLMP-C223-MN000

	To Download HLMP-C223-MN000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .