 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet 0603 Package Chip LED(0.6mm Height) 19-213/G6C-FN2Q1L/3T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain with in RoHS compliant version. Descriptions The 19-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Material AlGaInP Part No. 19-213/G6C-FN2Q1L/3T Emitted Color Brilliant Yellow Green Resin Color Water Clear Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 1 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T Package Outline Dimensions - + Note: Tolerances Unless Dimension is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 2 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 60 60 2000 -40 ~ +85 -40~ +90 Unit V mA mA mW V Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol IV 21/2 p d VF IR Min. 36.0 ------570.0 ---1.70 ---- Typ. ---120 575 ---20 ------- Max. 90.0 ------574.5 ---2.30 10 Unit mcd deg nm nm nm V A Condition IF=20mA VR=5V Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05V Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 3 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T Bin Range Of Dom. Wavelength Group F Bin CC1 CC2 CC3 Min 570.0 571.5 573.0 Max 571.5 573.0 574.5 nm IF=20mA Unit Condition Bin Range Of Luminous Intensity Bin N2 P1 P2 Q1 Min 36.0 45.0 57.0 72.0 Max 45.0 57.0 72.0 90.0 mcd IF=20mA Unit Condition Bin Range Of Forward Voltage Groups Bin 19 20 L 21 22 23 24 Min 1.70 1.80 1.90 2.00 2.10 2.20 Max 1.80 1.90 2.00 2.10 2.20 2.30 V IF=20mA Unit Condition Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05V Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 4 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 5 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank XXXXXXXXXXXXX QTY : XXX CAT : XXX HUE : XXX REF : XXX Pb EVERLIGHT RoHS CPN : P N : XXXXXXXXXXXXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm. Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 6 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm. Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 7 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 5 sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 Pcs. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 8 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 60%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 9 of 10 Prepared by:Wuhongmei 19-213/G6C-FN2Q1L/3T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Test Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 ReliabilityLane 76,Items And Conditions Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com The reliability of products shall be satisfied with items listed below. Everlight Electronics Co., Ltd. Device No:DSE-0002289 http://www.everlight.com Prepared date:13-Sep-2009 Rev 1 Page: 10 of 10 Prepared by:Wuhongmei |
Price & Availability of 19-213-G6C-FN2Q1L-3T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |