 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CFR530 5 Mb Fiber Optic Receiver inverter, open collector output 0.190 (4.83) 0.176 (4.47) 0.156 (3.96) 0.210 (5.33) 0.136 (3.45) 0.136 (3.45) 0.116 (2.95) 0.190 (4.83) (R) Clairex Technologies, Inc. April, 2004 0.500 (12.7) min 0.215 (5.46) 0.205 (5.21) OUTPUT COLLECTOR 0.160 (4.06) 0.10 (2.54) 0.150 (3.81) 0.098 (2.49) BASE GND VCC EMITTER 0.100 (2.54) dia 0.010 (0.25) max 0.025 (0.64) max 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) features * Converts fiber optic signals to TTL digital output * Single 5 V supply * TO-46 header with flat window lens can description The CFR530 is intended for use in fiber-optic systems and contains an open-collector, digital output, monolithic photo-IC mounted on a TO-46 header with a flat window lens can. The output allows direct interface with TTL circuits. A microlens is mechanically centered over the photodiode. absolute maximum ratings (TA = 25C unless otherwise stated) storage temperature ...................................................................... -55C to +125C operating temperature.................................................................... -55C to +125C lead soldering temperature(1) ......................................................................... 240C supply voltage...................................................................................................... 6V notes: 1. 1/16" (1.6mm) from case for 5 seconds maximum. 2. For maximum performance, a 0.1F capacitor must be connected between VCC and GND. 3. Pulse Width Distortion (PWD) is an increase in output pulse width due to optical power, temperature and/or frequency changes and is dependent on system conditions. definition: inverter - output is LOW when input radiation is above the threshold level. electrical characteristics (TA = 25C, VCC = 5VDC unless otherwise noted) symbol VCC PIN (peak) ICC VOL VOH tr tf PWD parameter Supply voltage(2) Minimum input sensitivity Supply current Low level output voltage High level output voltage Output rise time Output fall time Pulse width distortion(3) min 4.5 2.4 - typ 2.0 -27.0 13 4.5 0.25 4.5 6.0 6.0 5.0 25 max 5.5 4.0 -14.0 15 6.5 0.5 9.0 9.0 10 35 units V W dBm mA mA V V ns ns % % test conditions P = 850nm into 100/140 m optical fiber, f = 2.5MHz, D.C. = 50%, PWD <10% PIN 3W PIN 0.1W PIN 3W, RL = 560 PIN 0.1W, RL = 560 PIN = 10W, VO = 0.5 to 2.4V RL = 560 PIN = 10W, VO = 2.4 to 0.5V RL = 560 PIN = 3W peak f = 2.5MHz, PIN = 80W peak D.C. = 50% Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 10/01/04 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com |
Price & Availability of CFR530
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |