View 19-218-R6C-AL1M2VY-3T_946258.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Data Sheet 0603 Package Chip LED (0.3mm Height)
19-218/R6C-AL1M2VY/3T
Features
Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 19-218 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide Part No.
19-218/R6C-AL1M2VY/3T
Chip
Material AlGaInP
Emitted Color Briliant Red
Resin Color Water Clear
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2008
Rev.1
Page: 1 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
Package Outline Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2009
Rev.1
Page: 2 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
Absolute Maximum Ratings (Ta=25
Parameter Reverse Voltage Forward Current Peak Forward Current IFP (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Pd ESD Topr Tstg Tsol 60 2000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. mW V 60 mA Symbol VR IF
)
Rating 5 25 Unit V mA
Electro-Optical Characteristics (Ta=25
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current VF IR Symbol Iv 2 1/2 p d Min. 11.5 --------617.5 ----1.7 -----
)
Typ. ----130 632 ----20 --------Max. 28.5 --------633.5 ----2.2 10 Unit mcd deg nm IF=5mA nm nm V A VR=5V Condition
Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05V
Everlight Electronics Co., Ltd. Device No. : DSE-0001313 http://www.everlight.com Prepared date: 27-Apr-2009 Rev.1 Page: 3 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
Bin Range Of Dom. Wavelength
Bin E4 E5 E6 E7 Min 617.5 621.5 625.5 629.5 Max 621.5 625.5 629.5 633.5 nm IF=5mA Unit Condition
Bin Range Of Luminous Intensity
Bin L1 L2 M1 M2 Min 11.5 14.5 18.0 22.5 Max 14.5 18.0 22.5 28.5 mcd IF=5mA Unit Condition
Bin Range Of Forward Voltage
Bin 19 20 21 22 23 Min 1.7 1.8 1.9 2.0 2.1 Max 1.8 1.9 2.0 2.1 2.2 V IF=5mA Unit Condition
Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05V
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2009
Rev.1
Page: 4 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
Typical Electro-Optical Characteristics Curves
Spectrum Distribution Relative luminous intensity (%) Forward Current IF (mA) 100 75 Ta=25C 50 40 30 25 20 10 0 1.2
Forward Current vs. Forward Voltage
Ta=25C
50 25
0 500
550 600 650 Wavelength (nm)
700
1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Luminous Intensity vs. Forward Current Ta=25C
Luminous Intensity vs. Relative luminous intensity (%) 1000 Ambient Temperature Relative luminous intensity (%) 1000
100
100
10
10
1 -60 -40 -20
0 20 40 60 80 100
10 10
10
1
10
2
Ambient Temperature Ta (C) Forward Current Derating Curve Forward Current IF (mA) 50 40 30 25 20 10 0 0 20 1.0 0.9 0.8 0.7 40 60 85 100
Forward Current IF (mA) Radiation Diagram 0 10 Ta=25C 20 30
40 50 60 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6
Ambient Temperature Ta (C)
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2009
Rev.1
Page: 5 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
Label Explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Pb
EVERLIGHT
RoHS
CAT : XXX HUE : XXX REF : XXX
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MSL-2
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2009
Rev.1
Page: 6 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2009
Rev.1
Page: 7 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10%
No. 1
Items Reflow Soldering
Test Condition 5 Temp. : 260 Min. 5sec. H : +100 15min 5 min 15min L : -40 H : +100 5min 10 sec 5min L : -10 Temp. : 100 Temp. : -40 IF = 20 mA 85 / 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3 4 5 6 7
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2009
Rev.1
Page: 8 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. or less and 60% RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30
If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C
for 24 hours.
60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2009
Rev.1
Page: 9 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:
19-218/R6C-AL1M2VY/3T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. : DSE-0001313
http://www.everlight.com Prepared date: 27-Apr-2009
Rev.1
Page: 10 of 10
Prepared by: Ashley Kuo
Revision
:2
Release Date:2009-04-30 21:26:10.0 Expired Period: Forever
LifecyclePhase:

▲Up To Search▲

Price & Availability of 19-218-R6C-AL1M2VY-3T

	To Download 19-218-R6C-AL1M2VY-3T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .