|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
www..com TCB8803-1 LCD Module Controller Board User Manual Shenzhen TOPWAY Technology Co., Ltd. Rev. 0.1 Descriptions Preliminary Release Release Date 2005-11-24 URL: www.topwaydisplay.com www.topwaysz.com Document Name: TCB8803-1-Manual-Rev0.1.doc Page: 1 of 8 TOPWAY Table of Content 1. 1.1 1.2 1.3 1.4 1.5 LCD Module Controller Board User Manual TCB8803-1 Basic Specifications................................................................................................................ 3 Product Highlight.................................................................................................................................................... 3 Mechanical Specifications...................................................................................................................................... 3 Block Diagram........................................................................................................................................................ 4 Terminal Functions................................................................................................................................................. 4 Jumper Functions................................................................................................................................................... 6 2. 3. 3.1 3.2 Absolute Maximum Ratings.................................................................................................... 7 Electrical Characteristics........................................................................................................ 7 DC Characteristics ................................................................................................................................................. 7 AC Characteristics ................................................................................................................................................. 7 www..com 4. 4.1 4.2 Function Specifications .......................................................................................................... 8 Command and Data format.................................................................................................................................... 8 Connection Example and Contrast setting ............................................................................................................. 8 5. Design and Handling Precaution ........................................................................................... 8 URL: www.topwaydisplay.com www.topwaysz.com Document Name: TCB8803-1-Manual-Rev0.1.doc Page: 2 of 8 TOPWAY LCD Module Controller Board User Manual TCB8803-1 1. Basic Specifications Product Highlight 1) TCB8803-1 is a LCD Module Controller Board using RAiO RA8803-S LCD controller 2) Built in Chinese Characters ROM Simplified Chinese Characters (GB): 7602 char (16x16 dot font) ASCII Characters: 4 set ( 8x16 dot font) 3) Support Characters and Graphics mixed display 4) Support 4 Gray Scale 5) Bold Font function and Large Font function (up to 64x64 dot font) 6) Suitable for large size LCD module (up-to 320x240 4GS) 7) Direct interface with 8-bit MCU www..com 8) Speeding up the development for Chinese Characters Display System 9) Interface designed for TOPWAY LM2028, LM24064E LCD module or equivalent 10) Embedded SRAM 11) On board DC-DC inverter for VLCD supply 1.1 1.2 Mechanical Specifications K1 : suitable for 20pin IDC connector (P2.54mm) K2 : suitable for 16pin SIL header (P2.54mm) K3 : suitable for 14pin FFC connector (P1.25mm through hole type) URL: www.topwaydisplay.com www.topwaysz.com Document Name: TCB8803-1-Manual-Rev0.1.doc Page: 3 of 8 TOPWAY 1.3 Block Diagram K1 DB0 - DB7 RS, /WR(R/W), /RD(E) /RST, /CS BUSY LCD Module Controller Board User Manual TCB8803-1 K3 RA8803 Controller LD0 - LD3 XCK, LP, YD DISPLAYOFF VDD VSS VEE V0 DC-DC Inverter www..com VDD VSS VOUT V0 BLA BLK K2 LD0 - LD3 XCK, LP, YD, FRM DISPLAYOFF VDD VSS VEE V0 BLA BLK 1.4 1.4.1 Pin No. 1 2 3 4 5 6 7 8 9 Terminal Functions MCU Terminal K1 Pin I/O Name VOUT Output V0 Input VSS Power Input VDD Power Input BUSY Output NC /CS RS /WR(R/W) Input Input Input Descriptions DC-DC Inverter Output for V0 LCD Module Contrast Reference Power Supply GND (0V) Positive Power Supply Controller Busy signal MCU should check this signal before accessing the controller No connection, Keep open Chip Select /CS=LOW: Data IO is enabled Register Select RS=HIGH: data on DB0 to DB7 is display data RS=LOW: data on DB0 to DB7 is control data 8080 interface mode (default): Write enable input, active LOW 6800 interface mode: R/W=HIGH: Read mode selected R/W=LOW: Write mode selected 10 /RD(E) Input 8080 interface mode (default): Read enable input, active LOW 6800 interface mode: Enable Clock Signal, active HIGH 11 : 18 19 20 21 22 DB0 : DB7 /RST NC BLA BLK Bi-directional I/O Input Power Input Power Input 8-bit bi-directional data bus Reset Signal Input /RES=LOW: Reset the controller /RES=HIGH: Normal No connection, Keep open Backlight Positive power supply Backlight Negative power supply URL: www.topwaydisplay.com www.topwaysz.com Document Name: TCB8803-1-Manual-Rev0.1.doc Page: 4 of 8 TOPWAY LCD Module Controller Board User Manual TCB8803-1 1.4.2 LCD Module Terminal K2 (for TOPWAY LM2028 or TOPWAY LM24064E) Pin Pin I/O Descriptions No. Name 1 YD Output Scan Start Pulse 2 LP Output Latch Pulse 3 XCK Output X-driver Data Shifting Clock 4 FRM Output Frame AC Signal 5 V0 Output LCD Module Contrast Reference 6 VDD Power Output Positive Power supply 7 VSS Power Output Power Supply GND (0V) 8 VOUT Power Output LCD Driver Supply Output 9 LD0 Output X-driver Data www..com : : 12 LD3 13 /DISPLAYOFF Output Display On Signal 14 NC No Connection, Leave Open 15 BLA Power Output Backlight Positive Supply 16 BLK Power Output Backlight Negative Supply Note: - Only one of the LCD Module Terminals could be used at a time. - Never connect two LCD modules to the controller board at the same time. 1.4.3 Pin No. 1 2 3 : 6 7 8 9 10 11 12 13 14 LCD Module Terminal K3 (for EPSON EG8503) Pin I/O Descriptions Name V0 Output LCD Module Contrast Reference VOUT Power Output LCD Driver Supply LD3 Output X-Driver Data : LD0 VOUT Power Output LCD Driver Supply VSS Power Output Power Supply GND (0V) VDD Power Output Positive Power Supply XCK Output X-driver Data Shifting Clock LP Output Latch Pulse YD Output Scan Start Pulse NC No Connection, Keep Open /DISPLAYOFF Output Display On Signal Note: - Only one of the LCD Module Terminals could be used at a time. - Never connect two LCD modules to the controller board at the same time. URL: www.topwaydisplay.com www.topwaysz.com Document Name: TCB8803-1-Manual-Rev0.1.doc Page: 5 of 8 TOPWAY 1.5 1.5.1 Jumper Functions LCD Module Controller Board User Manual TCB8803-1 Interfacing Setting Jumper Setting JP1 JP2 JP4 JP5 CLOSE CLOSE OPEN CLOSE OPEN CLOSE OPEN OPEN CLOSE OPEN CLOSE OPEN Function 8080 mode 6800 mode 4bit mode Descriptions Set to 8080 interface mode (8-bit) www..com 1.5.2 Operating Voltage Setting Jumper Setting Function JP6 JP7 CLOSE OPEN 5V operation OPEN CLOSE 3V operation Descriptions 5V supply and 5V logic I/O URL: www.topwaydisplay.com www.topwaysz.com Document Name: TCB8803-1-Manual-Rev0.1.doc Page: 6 of 8 TOPWAY Items Supply Voltage Input Voltage Operating Temperature Storage Temperature LCD Module Controller Board User Manual TCB8803-1 2. Absolute Maximum Ratings Symbol VDD VIN TOP TST Min. -0.3 -0.3 0 -10 Max. 5.5 VDD+0.3 50 60 Unit V V C C Condition VSS = 0V VSS = 0V No Condensation No Condensation Cautions: Any Stresses exceeding the Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. www..com 3. Electrical Characteristics 3.1 DC Characteristics Symbol VDD VIH VIL VOH VOL VOUT IDD VSS=0V, VDD=3.3V, TOP =25C, JP6=CLOSE, JP7=OPEN MIN. TYP. MAX. Unit Applicable Pin VDD 2.7 3.3 3.6 V 0.8xVDD VSS 0.8xVDD 22.0 TBD VDD 0.1xVDD 0.2XVDD TBD V V V V V mA Input pins, Bi-direction pins Input pins, Bi-direction pins Output pins, Bi-direction pins Output pins, Bi-direction pins VOUT VDD Items Operating Voltage Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage DC-DC Inverter Output Operating Current Items Operating Voltage Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage DC-DC Inverter Output Operating Current Symbol VDD VIH VIL VOH VOL VOUT IDD VSS=0V, VDD=5.0V, TOP =25C, JP6=OPEN, JP7=CLOSE MIN. TYP. MAX. Unit Applicable Pin VDD 4.8 5.0 5.2 V 0.8xVDD VSS 0.2xVDD 22.0 TBD VDD 0.1xVDD 0.2xVDD TBD V V V V V mA Input pins, Bi-direction pins Input pins, Bi-direction pins Output pins, Bi-direction pins Output pins, Bi-direction pins VOUT VDD 3.2 AC Characteristics Please refer to RAiO RA8803 datasheet for details. URL: www.topwaydisplay.com www.topwaysz.com Document Name: TCB8803-1-Manual-Rev0.1.doc Page: 7 of 8 TOPWAY LCD Module Controller Board User Manual TCB8803-1 4. Function Specifications 4.1 Command and Data format Please refer to RAiO RA8803 for details. 4.2 Connection Example and Contrast setting The basic connect between TCB8803-1 and TOPWAY LM2028 LCD module, could be as follow. (The contrast setting VR could be 25k or 50k) K1 TCB8803-1 DB0 - DB7 RS, /WR(R/W), /RD(E) /RST, /CS BUSY VDD VSS VOUT V0 BLA BLK K2 LD0 - LD3 XCK, LP, YD, FRM DISPLAYOFF VDD VSS VOUT V0 BLA BLK LM2028 To MCU www..com 5.0V GND(0V) 3.5V GND(0V) 5. Design and Handling Precaution 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Any mechanical shock (eg. dropping form high place) will damage the device. Do not add excessive force on the device. Never attempt to disassemble or rework the device. When mounting the device, make sure that it is free form twisting, warping and distortion. Only hold the device by its side. Never add force to component of the device. It may cause invisible damage or degrade of the reliability. This could be easily damaged by static electricity. Be careful to maintain an optimum anti-static work environment to protect it. Take care and prevent get hurt by the device sharp edge. Never operate the device exceed the absolute maximum ratings. Keep the signal line as short as possible to prevent noisy signal applying to the device. Never apply signal to the device without power supply. Device reliability may be reduced by temperature shock. When storing the device, avoid exposure to the direct sunlight, high humidity, high temperature or low temperature. URL: www.topwaydisplay.com www.topwaysz.com Document Name: TCB8803-1-Manual-Rev0.1.doc Page: 8 of 8 |
Price & Availability of TCB8803-1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |